iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 295-3:1991/A1:1998

(Amendment)

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of four months (TC Res 130/1997) (CC/971015)

Steinzeugrohre und Formstücke sowie Rohrverbindungen für Abwasserleitungen und -kanäle - Teil 3: Prüfverfahren

Tuyaux et accessoires en grès et assemblages de tuyaux pour les réseaux de branchement et d'assainissement - Partie 3: Méthode d'essai

Keramične cevi, fazonski kosi in spoji za odvod odpadne vode in kanalizacijo - 3. del: Preskusne metode

General Information

Status
Withdrawn
Publication Date
18-Aug-1998
Withdrawal Date
10-Jan-2012
ICS
23.040.50 - Pipes and fittings of other materials
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165/WG 2 - Vitrified clay pipes
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Jan-2012
Completion Date
11-Jan-2012
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 295-3:1996/A1:2000 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods

Relations

Replaced By
EN 295-3:2012 - Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
Effective Date
18-Jan-2012
Amends
EN 295-3:1991 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods
Effective Date
08-Jun-2022

Buy Standard

EN 295-3:1996/A1:2000EN 295-3:1996/A1:2000
PreviousNext
Amendment
EN 295-3:1996/A1:2000
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2000
.HUDPLþQHFHYLID]RQVNLNRVLLQVSRML]DRGYRGRGSDGQHYRGHLQNDQDOL]DFLMR
GHO3UHVNXVQHPHWRGH
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test
methods
Steinzeugrohre und Formstücke sowie Rohrverbindungen für Abwasserleitungen und -
kanäle - Teil 3: Prüfverfahren
Tuyaux et accessoires en gres et assemblages de tuyaux pour les réseaux de
branchement et d'assainissement - Partie 3: Méthode d'essai
Ta slovenski standard je istoveten z: EN 295-3:1991/A1:1998
ICS:
23.040.50 Cevi in fitingi iz drugih Pipes and fittings of other
materialov materials
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno Ex
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 295-4:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
SIST EN 295-4:2013

This European Standard specifies requirements for adaptors and connectors made from vitrified clay and/or other suitable materials for use with vitrified clay pipes and fittings for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
Adaptors and connectors include insertable fittings, sealing rings for cut pipes and heat-shrinkable sleeves.
This standard also applies for metal banded flexible couplings and adaptors and specifies requirements for rubber, polyurethane, stainless steel and other components used for them.
NOTE 1   The specifiers/purchasers can select adaptors, connectors and flexible couplings according to their requirements.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295 2 and EN 295 3, respectively.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-6:2013(Main)
Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
SIST EN 295-6:2013

This European Standard applies for components for vitrified clay manholes and inspection chambers for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
It specifies different strength classes and heights of sections. It also specifies the requirements for components used for joints, systems of joint dimensions and the materials rubber, polyurethane and polypropylene used for joints.
NOTE 1   The specifiers/purchasers can select the components for vitrified clay manholes and inspection chambers according to their requirements.
This standard does not apply to manhole tops and cover slabs.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-7:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
SIST EN 295-7:2013

This European Standard specifies requirements for vitrified clay pipes and joints for pipe jacking for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. Pipe jacking techniques include micro-tunnelling, pipe-eating, pipe bursting and where appropriate lining with discrete pipes.
This standard also specifies requirements for rubber, polyurethane, polypropylene, stainless steel and other materials used for joints for pipe jacking.
NOTE   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-1:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
SIST EN 295-1:2013

This European Standard specifies requirements for vitrified clay pipes, fittings and flexible joints for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
This standard also specifies requirements for rubber, polyurethane and polypropylene materials and other components used for jointing clay pipes and fittings.
This standard specifies different strength classes, systems of joint dimensions, lengths and fittings.
NOTE 1   The specifiers/purchasers can select them according to their requirements.
This standard does not apply to special fittings, adaptors and compatible accessories, perforated pipes and fittings, manholes and inspection chambers and pipes and joints for pipe jacking, which are specified in other parts of the standard series EN 295.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-5:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
SIST EN 295-5:2013

This European Standard specifies requirements for perforated pipes and compatible fittings made from vitrified clay with or without sockets for use in land drains and drainage of waste tips. They are also used for percolation into the ground.
This standard specifies different strength classes and areas of perforations.
NOTE 1   The specifiers/purchasers can select perforated pipes and compatible fittings according to their requirements.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-2:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
SIST EN 295-2:2013

This European Standard specifies requirements for the evaluation of conformity of products manufactured from vitrified clay and other materials (referred to as "products") specified in the following standards:
-   pipes, fittings and joints according to EN 295-1;
-   adapters, connectors and flexible couplings according to EN 295-4;
-   perforated pipes and fittings according to EN 295-5;
-   components of manholes and inspection chambers according to EN 295-6; and
-   pipes and joints for pipe jacking according to EN 295-7.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-3:2012(Main)
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
SIST EN 295-3:2012

This European Standard specifies requirements for testing of products manufactured from vitrified clay and other materials specified in the following standards:
   pipes, fittings and joints according to EN 295-1;
   adaptors, connectors and flexible couplings according to EN 295-4;
   perforated pipes and fittings according to EN 295-5;
   components of manholes and inspection chambers according to EN 295 6;
   pipes and joints for pipe jacking according to EN 295-7.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1916:2002/AC:2008(Corrigendum)
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
SIST EN 1916:2003/AC:2008

TC Correction of Figure I.1 (this third Corrigendum to EN 1916:2002 contains the text of AC1, AC2 and AC3)

  • Corrigendum
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1916:2002(Main)
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
SIST EN 1916:2003

This European Standard specifies performance requirements as defined in table 1 and describes test methods for precast concrete pipes and fittings, unreinforced, steel fibre and reinforced, with flexible joints (with seals either integrated in the units or supplied separately) and nominal sizes not exceeding DN 3200 for units with a circular bore or WN/HN 1400/2100 for units with an egg-shaped bore, for which the main intended use is the conveyance of sewage, rainwater and surface water under gravity or occasionally at low head of pressure, in pipelines that are generally buried.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12763:2000(Main)
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
SIST EN 12763:2001

This European Sstandard applies to fibre-cement pipes, joints and fittings used for sewerage and rainwater discharge systems for buildings where pressure tight joints are required. It defines general composition, classification, geometrical, mechanical and physical characteristics and quality control.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day