Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a harness - a suspension, e.g. a balancer. This part, EN 792-5, applies to hand-held, non-electric, power tools used for making holes in hard materials like rock and concrete.

Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 5: Schlagbohrmaschinen

Die Norm EN 792 gilt für handgehaltene nicht-elektrisch betriebene Maschinen, die durch Motore mit drehender oder linearer Bewegung angetrieben werden, wobei die Energie aus Druckluft oder über Hydraulikflüssigkeit bezogen werden kann. Die Maschinen sind dazu bestimmt, durch eine Person verwendet und - mit einer oder beiden Händen gehalten, - in einer Halterung, z.B. Aufhängevorrichtung, aufgenommen zu werden. Dieser Teil, EN 792-5, gilt für handgehaltene nicht-elektrisch betriebene Maschinen zum Herstellen (Bohren) von Löchern in Gestein und Beton.

Machines portatives à moteur non électrique - Prescriptions de sécurité - Partie 5: Perceuses à rotation et à percussion

La norme EN 792 s'applique aux machines portatives non électriques entraînées par des moteurs rotatifs ou linéaires, alimentés par air comprimé, fluide hydraulique et prévues pour être utilisées par un seul opérateur et portée par: - la ou les main(s) de l'opérateur, - un harnais, - en suspension, p.e. à l'aide d'un équilibreur. Cette partie, EN 792-5, s'applique aux machines portatives non électriques utilisées pour le perçage de trous dans les matériaux durs comme la pierre et le béton.

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

General Information

Status

Withdrawn

Publication Date

20-Jun-2000

Withdrawal Date

09-Sep-2008

ICS

25.140.10 - Pneumatic tools

25.140.99 - Other hand-held tools

Technical Committee

CEN/TC 255 - Hand-held, non-electric power tools - Safety

Drafting Committee

CEN/TC 255 - Hand-held, non-electric power tools - Safety

Current Stage

9960 - Withdrawal effective - Withdrawal

Start Date

10-Sep-2008

Completion Date

10-Sep-2008

Directive

98/37/EC - Machinery

Mandate

M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery

Ref Project

SIST EN 792-5:2000 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

Relations

Merged Into

EN 792-5:2000+A1:2008 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

Effective Date

22-Dec-2008

Revised

EN ISO 11148-5:2011 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

Effective Date

22-Dec-2008

Buy Standard

Standard

EN 792-5:2000

English language

23 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 792-5:2000

SLOVENSKI STANDARD
SIST EN 792-5:2000
01-december-2000
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary
percussive drills
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive
drills
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
5: Schlagbohrmaschinen
Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 5:
Perceuses a rotation et a percussion
Ta slovenski standard je istoveten z: EN 792-5:2000
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
SIST EN 792-5:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 792-5:2000

---------------------- Page: 2 ----------------------

SIST EN 792-5:2000

---------------------- Page: 3 ----------------------

SIST EN 792-5:2000

---------------------- Page: 4 ----------------------

SIST EN 792-5:2000

---------------------- Page: 5 ----------------------

SIST EN 792-5:2000

---------------------- Page: 6 ----------------------

SIST EN 792-5:2000

---------------------- Page: 7 ----------------------

SIST EN 792-5:2000

---------------------- Page: 8 ----------------------

SIST EN 792-5:2000
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN

EN ISO 11148-13:2018(Main)

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)

SIST EN ISO 11148-13:2019

ISO 11148-13:2017 specifies safety requirements for hand-held non-electric power tools (hereinafter referred to as "fastener driving tools") intended for installation of a fastener (see Annex B), forming a mechanical connection or attachment with the workpiece which are for example wood and wood-based materials, plastic materials, fibre materials (loose or compacted), cementitious materials, metals and combinations of these materials. The fastener driving tools for fasteners can be powered by compressed air or combustible gases (which may be ignited by a battery or accumulator) and the energy is transmitted to an impacted element by an intermediary component that does not leave the device. These tools are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-13:2017 is applicable to fastener driving tools in which energy is applied to a loaded fastener for the purpose of driving this into a workpiece.
ISO 11148-13:2017 is not applicable to fastener driving tools in which the energy for driving fasteners is drawn from powder-actuated cartridges, hydraulics or from any type of electrical supply.
ISO 11148-13:2017 does not deal with special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture.
ISO 11148-13:2017 deals with all significant hazards, hazardous situations or hazardous events relevant to fastener driving tools for fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.
NOTE ISO 80079?36 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Standard
55 pages
English language
sale 10% off
e-Library read for
1 day
Draft
56 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-12:2012(Main)

Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)

SIST EN ISO 11148-12:2013

ISO 11148-12:2012 specifies safety requirements for hand-held non-electric power tools (hereinafter "circular, oscillating and reciprocating saws") intended for sawing. The circular, oscillating and reciprocating saws can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-12:2012 is applicable to circular saws, circular knives, oscillating saws having a saw blade with a radius of 50 mm or less or a diamond cutting-off blade with a radius of 100 mm or less, oscillating knives (including windshield knives) and reciprocating saws, including jig saws and power hack saws.
ISO 11148-12:2012 is not applicable to special requirements and modifications of circular, oscillating and reciprocating saws for the purpose of mounting them in fixtures.
ISO 11148-12:2012 deals with all significant hazards, hazardous situations or hazardous events relevant to circular, oscillating and reciprocating saws when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of circular, oscillating and reciprocating saws in potentially explosive atmospheres.

Standard
39 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-7:2012(Main)

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)

SIST EN ISO 11148-7:2012

ISO 11148-7:2012 specifies safety requirements for hand-held non-electric power tools (hereinafter "grinders") intended for grinding and cutting-off with abrasive products, for use on all kinds of materials. The grinders can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-7:2012 is applicable togrinders used with:
abrasive products with a peripheral operating speed less than or equal to 80 m/s;
cutting-off wheels with a peripheral operating speed less than or equal to100 m/s;
abrasive products with an outside nominal diameter less than or equal to 230 mm;
cutting-off wheels with an outside nominal diameter less than or equal to 250 mm;
wire brushes;
diamond and reinforced [segmented] wheels with an outside nominal diameter less than or equal to 450 mm;
flap discs and flap wheels.
ISO 11148-7:2012 does not cover special requirements and modifications of grinders for the purpose of mounting them in fixtures.
It is not applicable to
die grinders with collets which are treated in ISO 11148-9;
polishers and sanders [i.e. tools used with coated abrasives except flap discs and flap wheels] which are treated in ISO 11148-8;
cutting-off machines which are driven by internal combustion engines and are used for cutting construction materials, which are treated in ISO 19432;
shaft mounted wire brushes which are treated in ISO 11148-9.

Standard
64 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-2:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)

SIST EN ISO 11148-2:2012

ISO 11148-2:2011 specifies safety requirements for hand-held non-electric power tools without rotation (hereinafter "cutting-off and crimping power tools") intended for cutting off wires, cables, etc., and for crimping, for instance connectors to cable ends. The cutting-off and crimping power tools can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-2:2011 is applicable to crimping tools without a yoke, cutters, cutting-off tools, cutting pliers and crimping pliers.
ISO 11148-2:2011 is not applicable to special requirements and modifications of cutting-off and crimping power tools for the purpose of mounting them in fixtures, and it is not applicable to "double acting hydraulic rescue tools for fire and rescue service use".
ISO 11148-2:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to cutting-off and crimping power tools when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of cutting-off and crimping power tools in potentially explosive atmospheres.

Standard
30 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-8:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)

SIST EN ISO 11148-8:2012

ISO 11148-8:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "sanders and polishers") intended for polishing and sanding with all types of movement, e.g. rotary, orbital and reciprocating, using coated abrasive products, bonnets of various soft materials and endless belts. The sanders and polishers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-8:2011 is applicable to belt sanders, orbital sanders, polishers, random orbital sanders, rotary sanders and straight-line sanders.
ISO 11148-8:2011 is not applicable to special requirements and modifications of sanders and polishers for the purpose of mounting them in a fixture.
ISO 11148-8:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to sanders and polishers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of sanders and polishers in potentially explosive atmospheres.

Standard
33 pages
English language
sale 10% off
e-Library read for
1 day
Draft
35 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-9:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)

SIST EN ISO 11148-9:2012

ISO 11148-9:2011 specifies safety requirements for hand-held non-electric power tools fitted with collets (hereinafter "die grinders") intended for grinding and surface finishing and chamfering using mounted points, burrs and files and small wire brushes and other accessories mounted on shanks. The die grinders can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-9:2011 is applicable to angle die grinders, reciprocating files, rotary files and straight die grinders.
ISO 11148-9:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to die grinders when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of die grinders in potentially explosive atmospheres.

Standard
32 pages
English language
sale 10% off
e-Library read for
1 day
Draft
34 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-1:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)

SIST EN ISO 11148-1:2012

ISO 11148-1:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "assembly power tools for non-threaded mechanical fasteners") intended for installation, tightening or removal of both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-1:2011 is applicable to breakstem fastener, rivet or plug tools, breakstem lockbolt tools, mandrel loaded riveting tools and rivet nut setters.
ISO 11148-1:2011 is not applicable to special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture.
ISO 11148-1:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to assembly power tools for non-threaded mechanical fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.

Standard
29 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-11:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

SIST EN ISO 11148-11:2012

ISO 11148-11:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "nibblers and shears") with a reciprocating movement for nibbling and shearing. The nibblers and shears can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-11:2011 is applicable to nibblers and shears.
ISO 11148-11:2011 is not applicable to special requirements and modifications of nibblers and shears for the purpose of mounting them in a fixture.
ISO 11148-11:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to nibblers and shears when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of nibblers and shears in potentially explosive atmospheres.

Standard
29 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-10:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)

SIST EN ISO 11148-10:2012

ISO 11148-10:2011 specifies safety requirements for hand-held non‑electric compression power tools (hereinafter "compression power tools") for squeeze riveting, punching, shaping, pressing and cutting of metal, plastics or other materials. The compression power tools can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e. g. a balancer.
ISO 11148-10:2011 is applicable to crimping tools, collar splitters, power tools for metal forming (edge formers, folding tools, swagers), nut splitter heads, presses, punches, squeeze riveters, cutting power tools with parallel knives and alligator jaw compression riveters.
ISO 11148-10:2011 is not applicable to special requirements and modifications on compression power tools for the purpose of mounting them in fixtures.
ISO 11148-10:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to compression power tools when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of compression power tools in potentially explosive atmospheres.

Standard
30 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11148-5:2011(Main)

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

SIST EN ISO 11148-5:2012

ISO 11148-5:2011 specifies safety requirements for hand-held non‑electric power tools (hereinafter "rotary percussive drills") intended for making holes in hard materials, such as rock and concrete. The rotary percussive drills can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-5:2011 is applicable to plug hole drills, rock drills and rotary hammers.
ISO 11148-5:2011 is not applicable to special requirements and modifications of rotary percussive drills for the purpose of mounting them in a fixture.
ISO 11148-5:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to rotary percussive drills when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of rotary percussive drills in potentially explosive atmospheres.

Standard
35 pages
English language
sale 10% off
e-Library read for
1 day