Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard

This European Standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :   - 65 °C to 200 °C
Class W   :   - 65 °C to 175 °C
Class K   :   - 65 °C to 260 °C
Class A   :   - 65 °C to 200 °C

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90º Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für EN 2997 und EN 4067 - Produktnorm

Diese Europäische Norm legt eine Reihe von Endgehäusen, Bauform A, 90°, nicht abgedichtet, mit Zugentlastungsklemme
für die Verwendung unter den folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder : EN 3660-002
Temperaturreihe, Klasse N : −65 °C bis 200 °C
Klasse W : −65 °C bis 175 °C
Klasse K : −65 °C bis 260 °C
Klasse A : −65 °C bis 200 °C

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord coudé à 90º non étanche type A avec brides serre-câbles pour EN 2997 et EN 4067 - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 005. del: Kabelska spojka, tip A, netesnjena, z razbremenilno sponko za EN 2997 in EN 4067 - Standard za proizvod

Ta evropski standard določa nabor kabelskih spojk tipa A, 90°, netesnjenih, z razbremenilno sponko, za uporabo pod naslednjimi pogoji: Pripadajoči električni konektorji: EN 3660-002 temperaturni razpon, Razred N : -65°C do 200°C Razred W : -65°C do 175°C Razred K: -65°C do 260°C razred A: -65°C do 200°C.

General Information

Status
Withdrawn
Publication Date
10-Nov-2009
Withdrawal Date
23-Oct-2018
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
24-Oct-2018

Relations

Buy Standard

Standard
EN 3660-005:2010
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehause fur elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehause, Bauform A, 90º Ausfhrung, nicht abgedichtet, mit Zugentlastungsklemme fur EN 2997 und EN 4067 - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord coudé à 90º non étanche type A avec brides serre-câbles pour EN 2997 et EN 4067 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief
for EN 2997 and EN 4067 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-005:2009SIST EN 3660-005:2010en01-januar-2010SIST EN 3660-005:2010SLOVENSKI
STANDARDSIST EN 3660-005:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-005
November 2009 ICS 49.060 Supersedes EN 3660-005:2006English Version
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques -Partie 005 : Raccord coudé à 90º non étanche type A avec brides serre-câbles pour EN 2997 et EN 4067 - Norme de produit Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90º Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für EN 2997 und EN 4067 - Produktnorm This European Standard was approved by CEN on 20 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-005:2009: ESIST EN 3660-005:2010

Elements of electrical and optical connection
Test methods
Part 100: General EN 2997 (all parts), Aerospace series
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak EN 3660-001:2006, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards AS85049A, Connector accessories, electrical general specification for- 1) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001:2006 apply.
* As well as all parts quoted in this standard. 1) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. SIST EN 3660-005:2010

(continued
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.