EN 3660-001:2006

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification

This specification defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference.
This standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische Lieferbedingungen

Diese Norm kennzeichnet Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder für die Anwendung in der Luft- und Raumfahrt. Diese Endgehäuse können abgedichtet oder nicht abgedichtet sein und umfassen Bauformen, die zur Unterdrückung von Hochfrequenz- und elektromagnetischen Störungen geeignet sind.
Endgehäuse nach dieser Norm finden ihren Einsatz an elektrischen und optischen Rund- und Rechtecksteckverbindern für unterschiedliche Temperaturbereiche, Umweltbedingungen, feuerbeständige und nicht feuerbeständige Anwendungen, wie in den Produktnormen angegeben.

Série aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification technique

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 001. del: Tehnična specifikacija

General Information

• Status: Withdrawn
• Publication Date: 22-Aug-2006
• Withdrawal Date: 12-Jan-2016
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Jan-2016
• Ref Project: SIST EN 3660-001:2009 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification

Relations

• Replaced By: EN 3660-001:2016 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
• Effective Date: 18-Feb-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 001: Technische LieferbedingungenSérie aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 001 : Spécification techniqueAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-001:2006SIST EN 3660-001:2009en,de01-maj-2009SIST EN 3660-001:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3660-001August 2006ICS 49.060 English VersionAerospace series - Cable outlet accessories for circular andrectangular electrical and optical connectors - Part 001:Technical specificationSérie aérospatiale - Accessoires arrières pour connecteurscirculaires et rectangulaires électriques et optiques - Partie001 : Spécification techniqueLuft- und Raumfahrt - Endgehäuse für elektrische undoptische Rund- und Rechtecksteckverbinder - Teil 001:Technische LieferbedingungenThis European Standard was approved by CEN on 20 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3660-001:2006: ESIST EN 3660-001:2009

EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards.
EN 9100, Aerospace series — Quality management systems — Requirements (based on ISO 9001:2000) and Quality systems — Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994). EN 9133, Aerospace series — Quality management systems — Qualification Procedure for Aerospace Standard Parts.
IEC 60050-581, International Electrotechnical Vocabulary — Electromechanical components for electronic equipment. MIL-HDBK-454A, General Guidelines for Electronic Equipment. 1)
* All parts quoted in this standard. 1) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. SIST EN 3660-001:2009

4.3 Material/finish classes See Table 2. SIST EN 3660-001:2009

5 Design and description 5.1 Design Cable outlet accessories shall be designed and constructed to withstand normal handling incident to installation and maintenance in service. They shall be capable of being fitted to and removed from connectors by use of hand only unless otherwise specified in the product standard. The cable outlet accessory product standard shall contain outline drawings relating to general installation and interchangeability. 5.2 Materials Materials shall be suitable for the purpose intended and as specified in the product standard. When a definite material is not specified, a material shall be used which will enable the accessory to meet the performance requirements specified in the product standard. When dissimilar materials are employed in intimate contact with each other, protection against corrosion shall be used to ensure that the differential electromotive potential does not exceed 0,25 V. 5.3 Finish The finish shall be in accordance with the product standard. 5.4 Threads The threads shall conform to either ISO 2
...