prEN 18120-14
(Main)Packaging - Design for recycling for plastic packaging - Part 14: Recyclability evaluation process for plastic packaging - Protocols for PS and XPS packaging
Packaging - Design for recycling for plastic packaging - Part 14: Recyclability evaluation process for plastic packaging - Protocols for PS and XPS packaging
This document covers recyclability evaluation process guidance for PS and XPS packaging with respect to compatibility of the design with recycling processes for the polymers used.
Verpackung - Recyclingorientierte Gestaltung von Kunststoffverpackungsprodukten - Teil 14 - Verfahren zur Bewertung der Recyclingfähigkeit von Kunststoffverpackungen - Protokolle für Verpackungen aus PS und XPS
Dieses Dokument behandelt den Prozess zur Bewertung der Recyclingfähigkeit für PS- und XPS-Verpackungen im Hinblick auf die Kompatibilität der Gestaltung mit den Recyclingprozessen für die verwendeten Polymere.
Emballages - Conception des emballages plastiques en vue de leur recyclage - Partie 14 : Processus d’évaluation de la recyclabilité des emballages plastiques - Protocoles pour les emballages en PS et XPS
Le présent document fournit des recommandations pour le processus d’évaluation de la recyclabilité des emballages en PS et XPS, et plus particulièrement concernant la compatibilité de la conception avec les processus de recyclage des polymères usagés.
Embalaža - Načrtovanje, ki omogoča recikliranje plastične embalaže - 14. del: Postopek za ocenjevanje možnosti recikliranja plastične embalaže - Protokoli za plastično embalažo iz polistirena (PS) in ekstrudiranega polistirena (XPS)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Embalaža - Načrtovanje, ki omogoča recikliranje plastične embalaže - 14. del:
Postopek za ocenjevanje možnosti recikliranja plastične embalaže - Protokoli za
plastično embalažo iz polistirena (PS) in ekstrudiranega polistirena (XPS)
Packaging - Design for recycling for plastic packaging - Part 14: Recyclability evaluation
process for plastic packaging - Protocols for PS and XPS packaging
Verpackung - Recyclingorientierte Gestaltung von Kunststoffverpackungsprodukten - Teil
14 - Verfahren zur Bewertung der Recyclingfähigkeit von Kunststoffverpackungen -
Protokolle für Verpackungen aus PS und XPS
Ta slovenski standard je istoveten z: prEN 18120-14
ICS:
13.030.50 Recikliranje Recycling
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2024
ICS 55.020; 13.030.50; 83.080.20
English Version
Packaging - Design for recycling for plastic packaging -
Part 14: Recyclability evaluation process for plastic
packaging - Protocols for PS and XPS packaging
Verpackung - Recyclingorientierte Gestaltung von
Kunststoffverpackungsprodukten - Teil 14 - Verfahren
zur Bewertung der Recyclingfähigkeit von
Kunststoffverpackungen - Protokolle für Verpackungen
aus PS und XPS
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 261.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18120-14:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Recyclability evaluation process . 6
4.1 Principle . 6
4.2 Applicable unit operations . 7
4.3 Applicable unit operations for chemical recycling . 9
4.4 Test procedures . 9
4.4.1 Pre-treatment: grinding . 9
4.4.2 Pre-treatement – air elutriation . 9
4.4.3 Pre-treatment washing . 9
4.4.4 Pretreatment – floatation . 10
4.4.5 Pre-treatment: drying . 11
4.4.6 Flake blends preparation and composition . 11
4.4.7 Extrusion - Pellet characterization . 12
4.4.8 Converting – injection moulding and plates characterization . 13
4.4.9 Converting – pellet blends preparation . 13
4.4.10 Sheet extrusion and sheet characterization. 13
Bibliography . 14
European foreword
This document (prEN 18120-14:2024) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Introduction
EN 18120 consisting of 15 parts aims via a series of guidelines and protocols to establish consistency and
improvement for the Design for recycling of household, industrial and commercial plastic packaging.
— Part 1: Definitions and principles for design-for-recycling of plastic packaging
— Part 2: Process and governance to evaluate the recyclability of plastic packaging
— Part 3: Sortability evaluation process for plastic packaging
— Part 4: Guideline for PET bottles
— Part 5: Guideline for PET rigid packaging (except bottle)
— Part 6: Guideline for PE and PP rigid packaging
— Part 7: Guideline and protocols for PE and PP flexible packaging
— Part 8: Guideline for PS and XPS packaging
— Part 9: Guideline for EPS packaging
— Part 10: Recyclability evaluation process for plastic packaging – Protocols for PET bottles
— Part 11: Recyclability evaluation process for plastic packaging – Protocols for PET other rigid
packaging
— Part 12: Recyclability evaluation process for plastic packaging – Protocols for PE and PP rigid
packaging
— Part 13: Recyclability evaluation process for plastic packaging – Protocols for PE and PP flexible
packaging
— Part 14: Recyclability evaluation process for plastic packaging – Protocols for PS and XPS packaging
— Part 15: Recyclability evaluation process for plastic packaging – Protocols for EPS packaging
Design for recycling guidelines are a common way of describing compatibility with plastic packaging
collection, sorting and recycling into high quality recycled plastic into state-of-the-art facilities. They
provide guidance on the level compatibility, defined as:
— green: Packaging constituents with full compatibility with recycling;
— yellow: Packaging constituents with limited compatibility with recycling;
— red: Packaging constituents which are not compatible with recycling.
Recyclability guidelines will require regular review and improvement to reflect innovations in design,
collection, sorting and recycling.
The Design for recycling guidelines provided in this series of standards are representative of the state of
the art in Europe and cover all steps from design for recycling, packaging waste collection, sorting,
recycling into recycled plastic and to use in a new application.
Packaging recyclability is the combination of five parameters: packaging designed for recycling,
packaging waste collection, sorting when necessary, recycling and use of recycled plastic in a new
application. This series of standards covers one parameter: the design for recycling.
1 Scope
This document covers recyclability evaluation process guidance for PS and XPS packaging with respect
to compatibility of the design with recycling processes for the polymers used.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 18120-1, Packaging — Design for recycling of plastic packaging — Part 1: Definitions and principles
for design-for-recycling of plastic packaging
EN ISO 527-2, Plastics — Determination of tensile properties — Test conditions for moulding and extrusion
plastics (ISO 527-2)
EN ISO 1133-1, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate
(MVR) of thermoplastics — Part 1: Standard method (ISO 1133-1)
EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion
method, liquid pycnometer method and titration method (ISO 1183-1)
EN ISO 3451-1, Plastics — Determination of ash — Part 1: General methods (ISO 3451-1)
EN ISO 18314-1, Analytical colourimetry — Part 1: Practical colour measurement (ISO 18314-1)
ISO 11357-1, Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
ISO 11357-3, Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature
and enthalpy of melting and crystallization
ISO 11358-1, Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 18120-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Recyclability evaluation process
4.1 Principle
This standard provides a method of evaluating the technical recyclability of a rigid PS or XPS packaging
sample in mechanical or chemical recycling processes as they are implemented in Europe. The results
characterize both the processability of the sample as well as the quality of the recycled plastic.
Depending on the choice of the sample, the method can either provide a technical recyclability
determination for a given packaging design or item, or it can be employed to selectively study the impact
of individual design elements in PS or XPS plastic packaging on technical recyclability. The latter
approach may be employed to generate data for the updating of design for recycling guidelines.
The test method follows the steps (unit operations) that occur in a recycling process for rigid PS or XPS
packaging and seeks to simulate each operation on a laboratory scale. If one or more operational unit
item is tested leveraging a pilot line or an industrial line this is also permitted as long as the operation
tested is representative to the state-of-the-art technologies as described in prEN 18120-1.
4.2 Applicable unit operations
Step # Unit operation High level process description Reference test
procedures
0 Control material For the purposes of this standard, at least 25 kg /
selection of a suitable control material is required. The
control material can be selected from:
Option 1: An item made from a PS resin or resin
blend. The chosen resin or resin blend shall be
extruded and converted in rigid items at
conditions resembling commercial practices to
obtain the control material.
Option 2: A PS item which is known to be
recyclable and consisting of the same base PS
resin or resin blend as the test sample.
1 Pre-treatment: flakes preparation - This step simulates the preparation of PS and XPS flakes
1.1 Pre-treatment: Control and evaluated application PS or XPS 4.4.1
grinding containers are separately ground in order to fit
Pre-treatment –
the throat of a standard laboratory extruder. If
grinding
possible, it is recommended to use a granulator
rather than a grinder or shredder.
1.2 Pre-treatment: Control and evaluated application PS or XPS 4.4.2
air elutriation flakes are separately elutriated with air to
Pre-treatment –
remove light fraction.
air elutriation
1.3 Pre-treatment: Control and innovation PS samples are 4.4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.