EN 3475-513:2005

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)

This product standard defines a test method to evaluate the performance of a coaxial cable after the installation of plastic cable ties.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 513: Verformungsbeständigkeit

Diese Produktnorm legt ein Prüfverfahren zur Bewertung der Leistung einer koaxialen Leitung nach der Montage von Kabelbindern aus Kunststoff fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 513 : Déformation mécanique (Installation avec collier de frettage)

Aeronavtika – Električni kabli za uporabo v zračnih plovilih – Preskusne metode – 513. del: Odpornost proti deformaciji (namestitev s plastičnimi vezicami)

General Information

• Status: Withdrawn
• Publication Date: 25-Oct-2005
• Withdrawal Date: 25-Feb-2020
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Feb-2020
• Ref Project: SIST EN 3475-513:2006 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)

Relations

• Replaced By: EN 3475-513:2020 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
• Effective Date: 04-Mar-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)H]LFDPLSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 513 : Déformation mécanique (Installation avec collier de frettage)Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 513: VerformungsbeständigkeitTa slovenski standard je istoveten z:EN 3475-513:2005SIST EN 3475-513:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3475-513:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-513October 2005ICS 49.060 English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 513: Deformation resistance (Installation withplastic cable ties)Série aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 513 :Déformation mécanique (Installation avec collier defrettage)Luft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 513:VerformungsbeständigkeitThis European Standard was approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-513:2005: E



EN 3475-513:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Test method.5 5 Requirement.5



EN 3475-513:2005 (E) 3 Foreword This European Standard (EN 3475-513:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Sta
...