EN ISO 2867:2008
(Main)Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)
Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)
ISO 2867:2006 specifies criteria for access systems (steps, ladders, walkways, platforms, grab rails/handrails, grab handles, guardrails and enclosure entrance and exit openings) as they relate to aiding the operator, maintenance personnel and service personnel in performing their functions on earth-moving machinery. It is applicable to systems giving access to the operator platform and to routine maintenance points on earth-moving machinery as defined in ISO 6165 parked in accordance with the manufacturer's instructions, and to the 5th to 95th percentile operator dimensions as defined in ISO 3411. It deals with the following significant hazards, hazardous situations and events: slip, trip and fall of persons, and unhealthy postures or excessive effort.
Erdbaumaschinen - Zugänge (ISO 2867:2006, einschließlich Cor 1:2008)
Engins de terrassement - Moyens d'accès (ISO 2867:2006, Cor 1:2008 inclus)
L'ISO 2867:2006 spécifie les critères relatifs aux moyens d'accès (marches, échelles, passerelles, plates-formes, mains courantes, poignées, garde-corps et ouvertures ou issues de la cabine) en fonction de la facilité qu'ils offrent aux opérateurs et au personnel de maintenance et de service pour assurer leur travail sur l'engin de terrassement. Elle est applicable aux moyens d'accès à la plate-forme de l'opérateur et aux points de maintenance sur les engins de terrassement tels que définis dans l'ISO 6165, alors que l'engin est stationné conformément aux instructions du fabricant, pour des dimensions des opérateurs représentant 5 % à 95 % de la population telles que définies dans l'ISO 3411. L'ISO 2867:2006 traite des phénomènes dangereux significatifs, des situations dangereuses et des événements dangereux spécifiques aux moyens d'accès des engins de terrassement: glissade, perte d'équilibre, chute de personnes et postures défectueuses ou efforts excessifs.
Stroji za zemeljska dela - Dostopi (ISO 2867:2006, vključno s popravkom 1:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2008
1DGRPHãþD
SIST EN ISO 2867:2007
6WURML]D]HPHOMVNDGHOD'RVWRSL ,62 YNOMXþQRVSRSUDYNRP
Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)
Erdbaumaschinen - Zugänge (ISO 2867:2006, einschließlich Cor 1:2008)
Engins de terrassement - Moyens d'accès (ISO 2867:2006, Cor 1:2008 inclus)
Ta slovenski standard je istoveten z: EN ISO 2867:2008
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 2867
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2008
ICS 53.100 Supersedes EN ISO 2867:2006
English Version
Earth-moving machinery - Access systems (ISO 2867:2006,
including Cor 1:2008)
Engins de terrassement - Moyens d'accès (ISO 2867:2006, Erdbaumaschinen - Zugänge (ISO 2867:2006,
Cor 1:2008 inclus) einschließlich Cor 1:2008)
This European Standard was approved by CEN on 30 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2867:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Foreword
The text of ISO 2867:2006, including Cor 1:2008 has been prepared by Technical Committee ISO/TC 127
“Earth-moving machinery” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 2867:2008 by Technical Committee CEN/TC 151 “Construction equipment and building material
machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2009, and conflicting national standards shall be withdrawn
at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2867:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directives, see informative Annex ZA and ZB which are integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2867:2006, including Cor 1:2008 has been approved by CEN as a EN ISO 2867:2008 without
any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC, amended by Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with Essential Requirements 1.6.2, 3.2.1 and 3.4.5 of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this European standard.
Annex ZB
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements 1.1.7, 1.6.2, 3.2.1 and 3.4.5 of that Directive and associated EFTA
regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 2867
Sixth edition
2006-07-01
Earth-moving machinery — Access
systems
Engins de terrassement — Moyens d'accès
Reference number
ISO 2867:2006(E)
©
ISO 2006
ISO 2867:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 2867:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 General requirements for access systems . 4
5 Walking and standing surface criteria. 5
6 Step requirements . 5
7 Ladders . 8
8 Stairs and stairways . 8
9 Handrails and handholds. 8
10 Platforms, passageways, walkways, guardrails and foot barriers . 10
11 Enclosure openings. 12
Bibliography . 16
ISO 2867:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 2867 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2,
Safety requirements and human factors.
This sixth edition cancels and replaces the fifth edition (ISO 2867:1994), which has been technically revised.
iv © ISO 2006 – All rights reserved
ISO 2867:2006(E)
Introduction
The structure of safety standards in the field of machinery is as follows.
a) Type-A standards (basis standards) give basic concepts, principle for design and general aspects that
can be applied to machinery.
b) Type-B standards (generic safety standards) dealing with one or more safety aspect(s) or one or more
type(s) of safeguards that can be used across a wide range of machinery:
⎯ type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise);
⎯ type-B2 standards on safeguards (e.g. two-hands controls, interlocking devices, pressure sensitive
devices, guards).
c) Type-C standards (machinery safety standards) dealing with detailed safety requirements for a particular
machine or group of machines.
This International Standard is a type-C standard, as stated in ISO 12100-1.
When provisions of this type-C standard are different from those which are stated in type-A or type-B
standards, the provisions of this type-C standard take precedence over the provisions of the other standards
for machines that have been designed and built according to the provisions of this type-C standard.
NOTE ISO 14122 is a series of type-B standards that provides general requirements for access to stationary and
mobile machines and that can be used as a general reference for the design of access systems for earth-moving
machines.
INTERNATIONAL STANDARD ISO 2867:2006(E)
Earth-moving machinery — Access systems
1 Scope
This International Standard specifies criter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.