EN ISO 11380:1996
(Main)Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994)
Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994)
Specifies the characteristics of formers which are used in edging machines to edge lenses designed for insertion into spectacle frames. Not applicable to separate formers required for supplementary treatment of lenses, for example facetting.
Optik und optische Instrumente - Augenoptik - Formscheiben (ISO 11380:1994)
Diese Internationale Norm legt die charakteristischen Merkmale von Formscheiben fest, die in Randbearbeitungsmaschinen eingesetzt werden, welche Gläser zur Einpassung in Brillenfassungen bearbeiten. Sie gilt nicht für einzelne Formscheiben, die zur ergänzenden Behandlung von Gläsern, wie z.B. zum Facettieren, benötigt werden.
Optique et instruments d'optique - Optique ophtalmique - Gabarits (ISO 11380:1994)
La présente Norme internationale spécifie les caractéristiques des gabarits utilisés sur les machines à façonner les verres destinés à être adaptés dans les montures de lunettes. Elle ne traite pas des gabarits spéciaux destinés à des opérations complémentaires, par exemple le facettage des verres.
Optika in opticni instrumenti - Očesna optika - Šablone (ISO 11380:1994)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2000
2SWLNDLQRSWLFQLLQVWUXPHQWL2þHVQDRSWLNDâDEORQH ,62
Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994)
Optik und optische Instrumente - Augenoptik - Formscheiben (ISO 11380:1994)
Optique et instruments d'optique - Optique ophtalmique - Gabarits (ISO 11380:1994)
Ta slovenski standard je istoveten z: EN ISO 11380:1996
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
ISO
STANDARD
First edition
1994-10-01
Optics and Optical instruments -
Ophthalmic optics - Formers
Op tique et instrumen ts d ’optique - Optique oph talmique - Gabarits
Refet-ence numbes
ISO 11380:1994(E)
ISO 11380:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11380 was prepared by Technical Committee
lSO/TC 172, Optics and optica! instruments, Subcommittee SC 8,
Oph thalmic op tics.
0 ISO 1994
All rights reserved. Unless otherwise specified, no patt of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
INTERNATIONAL STANDARD 0 ISO ISO 11380:1994(E)
Optics and Optical instruments - Ophthalmic
optics - Formers
be capable of being fitted firmly, by hand, into the
1 Scope
aperture of the specified frame size without altering
the size or shape of the rim, as designed, and without
This International Standard specifies the cha
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.