EN 10245-4:2011
(Main)Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
Complementary to EN 10245-1, this European Standard specifies the characteristics and requirements for steel wire and wire products coated with polyester.
It covers both thermoplastic and thermosetting polyester.
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 4: Polyester-beschichteter Draht
Ergänzend zu EN 10245 1 legt diese Europäische Norm Eigenschaften und Anforderungen für Stahldraht und Drahterzeugnisse fest, die mit Polyester beschichtet sind.
Es werden sowohl thermoplastische als auch duroplastische Polyester erfasst.
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 4: Fils à revêtement de polyester
En complément de l’EN 10245-1, cette norme européenne spécifie les caractéristiques et les prescriptions relatives aux fils et produits tréfilés en acier revêtus de polyester.
Il traite des polyesters thermoplastiques et thermodurcissables.
Jeklena žica in žični izdelki - Organske prevleke na jekleni žici - 4. del: S poliestri prevlečena žica
Ta evropski standard dopolnjuje EN 10245-1 in določa karakteristike in zahteve za jeklene žice in žične izdelke, prevlečene s poliestrom. Zajema plastomerni in termoreaktivni poliester.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 4: Polyester beschichteter DrahtFils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 4: Fils à revêtement de polyesterSteel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10245-4:2011SIST EN 10245-4:2012en,de01-januar-2012SIST EN 10245-4:2012SLOVENSKI
STANDARDSIST EN 10245-4:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10245-4
October 2011 ICS 25.220.60; 77.140.65 Supersedes EN 10245-4:2003English Version
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 4: Fils à revêtement de polyester
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 4: Polyester beschichteter Draht This European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10245-4:2011: ESIST EN 10245-4:2012
Part 1: General Rules; Part 2: PVC finished wire; Part 3: PE coated wire; Part 4: Polyester coated wire; Part 5: Polyamide coated wire. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Tests described in this section are intended to be carried out by the organic coating material manufacturer or the applicator before the coating operation. Clause 6 relates to the characteristics and testing methods for the "organic coating" when the organic coating material has been applied to and has become an integral part of the finished wire. Consequently tests are intended to be in the main carried out by the coating "applicators". Clause 7 defines the performance requirements and testing methods on the "organic coating" of the finished wire product, and where this is not possible, tests will be carried out on "coated" panels Scope 1 Scope Complementary to EN 10245-1, this European Standard specifies the characteristics and requirements for steel wire and wire products coated with polyester. It covers both thermoplastic and thermosetting polyester. SIST EN 10245-4:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.