EN 3745-513:2005

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance

This standard specifies a method to determine the ability of an optical fibre cable to withstand crushing under specified environmental conditions.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 513: Querdruckfestigkeit

Diese Norm legt ein Verfahren fest, mit dem bestimmt wird, ob ein Lichtwellenleiterkabel der Querkraft unter vorgegebenen Umweltbedingungen standhalten kann.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 513 : Résistance à l'écrasement

Aeronavtika – Optična vlakna in kabli za uporabo v zračnih plovilih – Preskusne metode – 513. del: Odpornost proti drobljenju

General Information

• Status: Published
• Publication Date: 15-Nov-2005
• Withdrawal Date: 30-May-2006
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 16-Nov-2005
• Completion Date: 16-Nov-2005
• Ref Project: SIST EN 3745-513:2006 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistanceSérie aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 513 : Résistance a l'écrasementLuft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 513: QuerdruckfestigkeitTa slovenski standard je istoveten z:EN 3745-513:2005SIST EN 3745-513:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3745-513:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-513November 2005ICS 49.060 English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 513: Crush resistanceSérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 513 : Résistanceà l'écrasementLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 513:QuerdruckfestigkeitThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-513:2005: E



EN 3745-513:2005 (E) 2 Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Apparatus.4 5 Method.6



EN 3745-513:2005 (E) 3 Foreword This European Standard (EN 3745-513:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 3745-513:2005 (E) 4 1 Scope This standard specifies a method to determine the ability of an optical fibre cable to withstand crushing under specified environmental conditions. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated referenc
...