iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1433:2002/A1:2005

(Amendment)

Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity

Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-und Prüfgrundsätze, Kennzeichnung und Beurteilung der Konformität

Caniveaux hydrauliques pour l'évacuation des eaux dans les zones de circulation utilisées par les piétons et les vehicules - Classification, prescriptions de conception et d'essai, marquage et évaluation de la conformité

Padavinska kanalizacija na voznih površinah in na površinah za pešce - Klasifikacija, projektiranje in zahteve za preskušanje, označevanje in ovrednotenje skladnosti

General Information

Status
Published
Publication Date
31-May-2005
Withdrawal Date
30-Dec-2005
ICS
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165 - Waste water engineering
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Jun-2005
Due Date
09-Apr-2006
Completion Date
01-Jun-2005
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/118 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on waste water engineering products
Ref Project
SIST EN 1433:2003/A1:2005 - Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity

Relations

Amends
EN 1433:2002 - Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
Effective Date
22-Dec-2008

Buy Standard

EN 1433:2003/A1:2005 (EN)EN 1433:2003/A1:2005 (EN)
PreviousNext
Amendment
EN 1433:2003/A1:2005 (EN)
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 1433:2003/A1:2005 (DE)EN 1433:2003/A1:2005 (DE)
PreviousNext
Amendment
EN 1433:2003/A1:2005 (DE)
German language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2005
3DGDYLQVNDNDQDOL]DFLMDQDYR]QLKSRYUãLQDKLQQDSRYUãLQDK]DSHãFH
.ODVLILNDFLMDSURMHNWLUDQMHLQ]DKWHYH]DSUHVNXãDQMHR]QDþHYDQMHLQRYUHGQRWHQMH
VNODGQRVWL
Drainage channels for vehicular and pedestrian areas - Classification, design and testing
requirements, marking and evaluation of conformity
Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-und Prüfgrundsätze,
Kennzeichnung und Beurteilung der Konformität
Caniveaux hydrauliques pour l'évacuation des eaux dans les zones de circulation
utilisées par les piétons et les vehicules - Classification, prescriptions de conception et
d'essai, marquage et évaluation de la conformité
Ta slovenski standard je istoveten z: EN 1433:2002/A1:2005
ICS:
93.080.30
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 1433:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 93.080.30
English version
Drainage channels for vehicular and pedestrian areas -
Classification, design and testing requirements, marking and
evaluation of conformity
Caniveaux hydrauliques pour l'évacuation des eaux dans Entwässerungsrinnen für Verkehrsflächen - Klassifizierung,
les zones de circulation utilisées par les piétons et les Bau-und Prüfgrundsätze, Kennzeichnung und Beurteilung
vehicules - Classification, prescriptions de conception et der Konformität
d'essai, marquage et évaluation de la conformité
This amendment A1 modifies the European Standard EN 1433:2002; it was approved by CEN on 21 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por
...


SLOVENSKI STANDARD
01-september-2005
3DGDYLQVNDNDQDOL]DFLMDQDYR]QLKSRYUãLQDKLQQDSRYUãLQDK]DSHãFH
.ODVLILNDFLMDSURMHNWLUDQMHLQ]DKWHYH]DSUHVNXãDQMHR]QDþHYDQMHLQRYUHGQRWHQMH
VNODGQRVWL
Drainage channels for vehicular and pedestrian areas - Classification, design and testing
requirements, marking and evaluation of conformity
Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-und Prüfgrundsätze,
Kennzeichnung und Beurteilung der Konformität
Caniveaux hydrauliques pour l'évacuation des eaux dans les zones de circulation
utilisées par les piétons et les vehicules - Classification, prescriptions de conception et
d'essai, marquage et évaluation de la conformité
Ta slovenski standard je istoveten z: EN 1433:2002/A1:2005
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPÄISCHE NORM
EN 1433:2002/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
Juni 2005
ICS 93.080.30
Deutsche Fassung
Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-
und Prüfgrundsätze, Kennzeichnung und Beurteilung der
Konformität
Drainage channels for vehicular and pedestrian areas - Caniveaux hydrauliques pour l'évacuation des eaux dans
Classification, design and testing requirements, marking les zones de circulation utilisées par les piétons et les
and evaluation of conformity vehicules - Classification, prescriptions de conception et
d'essai, marquage et évaluation de la conformité
Diese Änderung A1 modifiziert die Europäische Norm EN 1433:2002. Sie wurde vom CEN am 21.März 2005 angenommen.
Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denen
diese Änderung in der betreffenden nationalen Norm, ohne jede Änderung, einzufügen ist. Auf dem letzen Stand befindliche Listen dieser
nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum oder bei jedem CEN-Mitglied auf Anfrage
erhältlich.
Diese Änderung besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen Sprache, die von
einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem Management-Zentrum
mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.
CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Dänemark, Deutschland, Estland, Finnland, Frankreich, Griechenland,
Irland, Island, Italien, Lettland, Litauen, L
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 124-3:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
SIST EN 124-3:2015

This European Standard is applicable to gully tops and manhole tops made of mild steel, stainless steel and aluminium alloys whether in combination with concrete or not, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation in areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400),
-   areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
-   areas imposing particularly high wheel loads, e.g. aircraft pavements (class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124 1 and gives guidance for combinations of covers/gratings made from steel or aluminium alloys with frames according to EN 124 2 and EN 124 4, EN 124 5 and EN 124 6.
Fabrication of manhole tops and gully tops in accordance with this standard is limited to cold forming, mechanical crimping or welding together component parts made from metal plate, strip or bar or rolled or extruded metal sections.
This European Standard is not applicable to:
-   manhole tops and gully tops made of aluminium tread plates for use in carriageways of roads (class D 400) and areas imposing high wheel loads (Classes E 600 and F 900),
-   concave gratings for classes D 400 installed in carriageways of roads and hard shoulders and concave gratings for classes F 900 and E 600.
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-5:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
SIST EN 124-5:2015

This European Standard is applicable to manhole tops and gully tops made of composite materials C1, C2 and C3 by using suitably controlled automatic processes that produce a single structure and that do not contain multiple pieces bonded together, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (class C 250),
and in addition to manhole tops for use in
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (class D 400).
This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made from composite materials with frames according to EN 124-2, EN 124-3, EN 124-4 and EN 124-6.
This document is not applicable to:
-   manhole tops and gully tops manufactured by means of hand lay-up method,
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-6:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
SIST EN 124-6:2015

This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
-   areas which can only be used by pedestrians and pedal cyclists (class A 15), and
-   pedestrian areas and comparable areas, car parks or car parking decks (class B 125).
This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVC–U with frames according to EN 124 2, EN 124 3, EN 124 4 and EN 124 5.
This European Standard is not applicable in isolation but only in combination with EN 124 1.
This European Standard is not applicable to:
-   rodding point covers according to EN 13598 1;
-   gratings/covers as part of prefabricated drainage channels according to EN 1433;
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts);
-   surface boxes.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-1:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
SIST EN 124-1:2015

This European Standard is applicable to manhole tops and gully tops with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers installed in areas subjected to pedestrian and/or vehicular traffic. It specifies definitions, classification, general principles of design, performance requirements and test methods for gully tops and manhole tops according to:
-   EN 124 2, for gully tops and manhole tops made of cast iron;
-   EN 124 3, for gully tops and manhole tops made of steel or aluminium alloy;
-   EN 124 4, for gully tops and manhole tops made of steel reinforced concrete;
-   EN 124 5, for gully tops and manhole tops made of composite materials;
-   EN 124 6, for gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U).
Part 1 is only applicable in combination with at least one of the standards EN 124 2, EN 124 3, EN 124 4, EN 124 5 and EN 124 6 each of which has this Part 1 as an integral part.
This European Standard is not applicable to:
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 1,
-   surface boxes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-2:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
SIST EN 124-2:2015

This European Standard is applicable to gully tops and manhole tops made of flake graphite cast iron and/or spheroidal graphite cast iron whether in combination with concrete or not, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400),
-   areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
-   areas imposing particularly high wheel loads, e.g. aircraft pavements (class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124 1 and gives guidance for combinations of covers/grating made from cast iron with frames according to EN 124 3, EN 124 4, EN 124 5 and EN 124 6.
This European Standard is not applicable to:
-   fillings installed on site, e.g. concrete, paving blocks, etc.,
-   concave gratings for classes D 400 installed in carriageways of roads and hard shoulders and concave gratings for classes F 900 and E 600,
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-4:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
SIST EN 124-4:2015

This European Standard is applicable to precast gully tops and manhole tops made of steel reinforced concrete with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
-   areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400),
-   areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
-   areas imposing particularly high wheel loads, e.g. aircraft pavements (Group 6, class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124 1 and gives guidance for combinations of covers/gratings made of steel reinforced concrete with frames according to EN 124 2, EN 124 3, EN 124 5 and EN 124 6.
This European Standard is not applicable to:
-   concave gratings for class D 400 installed in carriageways of roads and hard shoulders and concave gratings for classes F 900 and E 600;
-   gratings/covers as part of prefabricated drainage channels according to EN 1433;
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts); and
-   surface boxes.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1433:2002/AC:2004(Corrigendum)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
SIST EN 1433:2003/AC:2005

TC - Modification of Table A.3, footnote a plus modification of Scope and title of Figure A.3 in German version

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1433:2002(Main)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
SIST EN 1433:2003

This European Standard specifies requirements for prefabricated linear drainage channels for the collection and conveyance of surface water when installed within areas subject to pedestrian and/or vehicular traffic. It applies to grid units, slot units and kerb units up to a clear opening of 1000 mm.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1794-1:2024(Main)
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Methods of determination of the mechanical and stability characteristics
SIST EN 1794-1:2024

This document specifies criteria to categorize road traffic noise reducing devices according to basic mechanical characteristics under standard conditions of exposure, irrespective of the materials used. A range of conditions and optional requirements is provided in order to take into account the wide diversity of practice in Europe. Individual aspects of performance are covered separately in the annexes. Safety considerations in the event of damage to road noise reducing devices are covered in EN 1794-2.
This document covers the current behaviour of the product. For the assessment of its long-term characteristics, EN 14389 is applicable.
NOTE   The test procedure described in Annex A does not consider the fatigue effect.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1794-2:2024(Main)
Road traffic noise reducing devices - Non-acoustic performance - Part 2: Methods of determination of the general safety and environmental characteristics
SIST EN 1794-2:2024

This document specifies methods and criteria for assessing the general safety and environmental performance of road traffic noise reducing devices under typical roadside conditions. Appropriate test methods are provided where these are necessary. The treatment of each topic is covered separately in Annexes A to F.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day