This document defines the accuracy, credibility and confidence in the results of virtual crash test to roadside safety devices through the definition of procedures for verification, validation and development of numerical models for roadside safety application. Finally it defines a list of indications to ensure the competences of an expert/organization in the domain of virtual testing.

    • sale 10% off
    • Standard
      85 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      76 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies minimum requirements and other criteria for assessing the general safety and environmental performance of road traffic noise reducing devices under typical roadside conditions. Requirements for more onerous conditions are a matter for consideration by the designer. Appropriate test methods are provided where these are necessary, but for some aspects a declaration of material characteristics may be required for the information of designers. The treatment of each t...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      25 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for new traffic cones and new traffic cylinders with retroreflective properties.
This document specifies minimum essential visual and physical performance characteristics; test methods for determination of product performance and the means by which this performance may be communicated to the user and the public including safety enforcement agencies.
The document provides a series of categories or classes by which a traffic cone or traffic cylinder may be sp...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      32 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for new traffic cones and new traffic cylinders with retroreflective properties.
This document specifies minimum essential visual and physical performance characteristics; test methods for determination of product performance and the means by which this performance may be communicated to the user and the public including safety enforcement agencies.
The document provides a series of categories or classes by which a traffic cone or traffic cylinder may be sp...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      32 pages
      English language
    • e-Library read for
      1 day

This document specifies performance test procedures to determine the passive safety properties of support structures such as lighting columns, sign posts, structural elements, foundations, detachable products and any other components used to support a particular item of equipment on the roadside.
This document provides a common basis for the vehicle impact testing of items of road equipment support structures.
This document does not apply to road restraint systems.

    • sale 10% off
    • Standard
      69 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      65 pages
      English language
    • e-Library read for
      1 day

This document specifies performance test procedures to determine the passive safety properties of support structures such as lighting columns, sign posts, signal supports, structural elements, foundations, detachable products and any other components used to support a particular item of equipment on the roadside.
This document provides a common basis for the vehicle impact testing of items of road equipment support structures.
This document does not apply to road restraint systems.

    • sale 10% off
    • Standard
      69 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      65 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent...view more

    • sale 10% off
    • Technical specification
      48 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This document excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent...view more

    • sale 10% off
    • Technical specification
      48 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for Road Traffic Signal Systems, including their development, design,
testing, installation and maintenance.
In particular, it forms the electrotechnical part of the following two standards issued by CEN:
— EN 12368, Traffic control equipment ― Signal heads;
— EN 12675, Traffic signal controllers ― Functional safety requirements.
Each of these standards above will be used with this standard either singly or together to define an
operational equipment or...
view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European Standard provides specifications for two types of variable message signs (VMS); i.e. continuous (see 3.4) and discontinuous (see 3.7).
This European Standard covers mobile, temporary and permanently installed VMS used in circulation areas, on public and private land, including tunnels for the information, guidance, warning and/or direction of traffic. Test modules are used to demonstrate compliance with the requirements.
This European Standard specifies visual and physical charac...
view more

    • sale 10% off
    • Standard
      121 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies criteria to categorize road traffic noise reducing devices according to basic mechanical performance under standard conditions of exposure, irrespective of the materials used. A range of conditions and optional requirements is provided in order to take into account the wide diversity of practice in Europe. Individual aspects of performance are covered separately in the annexes. Safety considerations in the event of damage to noise reducing devices are covered in ...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies criteria to categorize road traffic noise reducing devices according to basic mechanical performance under standard conditions of exposure, irrespective of the materials used. A range of conditions and optional requirements is provided in order to take into account the wide diversity of practice in Europe. Individual aspects of performance are covered separately in the annexes. Safety considerations in the event of damage to noise reducing devices are covered in ...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This European Standard provides specifications for two types of variable message signs (VMS); i.e. continuous (see 3.4) and discontinuous (see 3.7).
This European Standard covers mobile, temporary and permanently installed VMS used in circulation areas, on public and private land, including tunnels for the information, guidance, warning and/or direction of traffic. Test modules are used to demonstrate compliance with the requirements.
This European Standard specifies visual and physical charac...
view more

    • sale 10% off
    • Standard
      121 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for Road Traffic Signal Systems, including their development, design, testing, installation and maintenance. In particular, it forms the electrotechnical part of the following two standards issued by CEN: - EN 12368, Traffic control equipment - Signal heads; - EN 12675, Traffic signal controllers - Functional safety requirements. Each of these standards above will be used with this standard either singly or together to define an operational equipment or syste...view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the laboratory method for measuring the airborne sound insulation performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic performance of barriers that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be ins...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ i...
view more

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

This document specifies the laboratory method for measuring the airborne sound insulation performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic performance of barriers that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed on...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic ...
view more

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day