prEN ISO 19403-7
(Main)Paints and varnishes - Wettability - Part 7: Measurement of the dynamic contact angles and the roll-off angle on a tilt stage (ISO/DIS 19403-7:2023)
Paints and varnishes - Wettability - Part 7: Measurement of the dynamic contact angles and the roll-off angle on a tilt stage (ISO/DIS 19403-7:2023)
ISO 19403-7:2017 specifies a method for the dynamic measurement of the roll-off angle of a liquid drop on a solid surface. From the dynamic measurement, the advancing and receding angles of the drop rolling off can also be determined. The roll-off angle plays a role when evaluating, for example, easy-to-clean or anti-adherent surfaces.
Beschichtungsstoffe - Benetzbarkeit - Teil 7: Messung der dynamischen Kontaktwinkel und des Abrollwinkels auf einem Neigetisch (ISO/DIS 19403‑7:2023)
Peintures et vernis - Mouillabilité - Partie 7: Mesurage des angles de contact dynamiques et de l’angle de roulement sur un plan incliné (ISO/DIS 19403-7:2023)
Le présent document spécifie une méthode de mesure dynamique de l'angle de roulement d'une goutte de liquide sur une surface solide. Il est également possible, dans un mesurage dynamique, de déterminer l'angle d'avancée et l'angle de recul de la goutte qui roule. L'angle de roulement joue un rôle dans l'évaluation, par exemple, de surfaces anti-adhérentes ou à nettoyage facile.
Barve in laki - Omočljivost - 7. del: Merjenje dinamičnega stičega kota in kota tečenja na nagnjeni površini (ISO/DIS 19403-7:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 19403-7:2023
01-november-2023
[Not translated]
Paints and varnishes - Wettability - Part 7: Measurement of the dynamic contact angles
and the roll-off angle on a tilt stage (ISO/DIS 19403-7:2023)
Beschichtungsstoffe - Benetzbarkeit - Teil 7: Messung der dynamischen Kontaktwinkel
und des Abrollwinkels auf einem Neigetisch (ISO/DIS 19403-7:2023)
Peintures et vernis - Mouillabilité - Partie 7: Mesurage des angles de contact
dynamiques et de l’angle de roulement sur un plan incliné (ISO/DIS 19403-7:2023)
Ta slovenski standard je istoveten z: prEN ISO 19403-7
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 19403-7:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 19403-7:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 19403-7:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19403-7
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-09-25 2023-12-18
Paints and varnishes — Wettability —
Part 7:
Measurement of the dynamic contact angles and the roll-
off angle on a tilt stage
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19403-7:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 19403-7:2023
ISO/DIS 19403-7:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19403-7
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
Paints and varnishes — Wettability —
Part 7:
Measurement of the dynamic contact angles and the roll-
off angle on a tilt stage
ICS: 87.040
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19403-7:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 19403-7:2023
ISO/DIS 19403-7:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.