iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15512:2020/FprA1

(Amendment)

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design

This European Standard specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This European Standard gives guidelines for the design of clad rack buildings where requirements are not covered in EN 1993. The requirements of this European Standard also apply to ancillary structures, where rack components are employed as the main structural members.
This European Standard does not cover other generic types of storage structures. Specifically, this European Standard does not apply to mobile storage systems, drive-in, drive-through and cantilever racks or static steel shelving systems, nor does this European Standard establish specific design rules for the assessment of racking in seismic areas.

Ortsfeste Regalsysteme aus Stahl - Verstellbare Palettenregale - Grundlagen der statischen Bemessung

No scope available

Systèmes de stockage statiques en acier - Systèmes de rayonnages à palettes réglables - Principes applicables au calcul des structures

Stabilni jekleni sistemi za skladiščenje - Sistemi za nastavljive regale za palete - Načela dimenzioniranja - Dopolnilo A1

General Information

Status
Not Published
Publication Date
13-Jul-2022
ICS
53.080 - Storage equipment
Technical Committee
CEN/TC 344 - Steel static storage systems
Drafting Committee
CEN/TC 344 - Steel static storage systems
Current Stage
Ref Project
SIST EN 15512:2021/oprA1:2021 - Steel static storage systems - Adjustable pallet racking systems - Principles for structural design

Relations

Merged Into
EN 15512:2020+A1:2022 - Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
Effective Date
18-Jan-2023
Amends
EN 15512:2020 - Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
Effective Date
02-Mar-2021

Buy Standard

EN 15512:2021/oprA1:2021EN 15512:2021/oprA1:2021
PreviousNext
Draft
EN 15512:2021/oprA1:2021
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Stabilni jekleni sistemi za skladiščenje - Sistemi za nastavljive regale za palete -
Načela dimenzioniranja - Dopolnilo A1
Steel static storage systems - Adjustable pallet racking systems - Principles for structural
design
Ortsfeste Regalsysteme aus Stahl - Verstellbare Palettenregale - Grundlagen der
statischen Bemessung
Systèmes de stockage statiques en acier - Systèmes de rayonnages à palettes réglables
- Principes applicables au calcul des structures
Ta slovenski standard je istoveten z: EN 15512:2020/prA1
ICS:
53.080 Skladiščna oprema Storage equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 15512:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2021
ICS 53.080
English Version
Steel static storage systems - Adjustable pallet racking
systems - Principles for structural design
Systèmes de stockage statiques en acier - Systèmes de Ortsfeste Regalsysteme aus Stahl - Verstellbare
rayonnages à palettes réglables - Principes applicables Palettenregale - Grundlagen der statischen Bemessung
au calcul des structures
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 344.

This draft amendment A1, if approved, will modify the European Standard EN 15512:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15512:2020/prA1:2021 E
worldwide for CEN national Members.

EN 15512:2020/prA1:2021 (E)
Contents Page
European foreword . 3
1 Modification to 9.1.3.3 "Slab deformation limits bolted frames" . 4
2 Modification to 9.2.2.1 "General" . 4
3 Modification to E.4.3 "Bending and axial compression – buckling resistance of
member" . 4
4 Modification to N.1 "Dutch national legislative deviations" . 5
5 Modification to N.2 "Italian national legislative deviations" . 6

EN 15512:2020/prA1:2021 (E)
European foreword
This document (EN 15512:2020/prA1:2021) has been prepared by Technical Committee CEN/TC 344
“Steel static storage systems”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.

EN 15512:2020/prA1:2021 (E)
1 Modification to 9.1.3.3 "Slab deformation limits bolted frames"
Replace the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15512:2020+A1:2022(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
SIST EN 15512:2021+A1:2022

This document specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This document gives guidelines for the design of clad rack buildings where requirements are not covered in the EN 1993 series. The requirements of this document also apply to ancillary structures, where rack components are employed as the main structural members.
This document does not cover other generic types of storage structures. Specifically, this document does not apply to mobile storage systems, drive-in, drive-through, pallet live storage, push back, shuttle systems, systems where two or more cranes operates one above another in the same aisle and cantilever racks or static steel shelving systems.
For the specific design of adjustable pallet racking for use in seismic areas, this document is to be used in combination with EN 16681.

  • Standard
    182 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15620:2021(Main)
Steel static storage systems - Tolerances, deformations and clearances
SIST EN 15620:2021

This document specifies tolerances, deformations and clearances that pertain to the production, assembly and erection and performance under load of pallet racking and cantilever racking. These tolerances, deformations and clearances are important in relation to the functional requirements and ensuring the proper interaction of the handling equipment used by personnel, trained and qualified as competent, in association with the specific type of racking system. The interaction conditions are also important in determining the reliability of the storage system to ensure that the chance of mechanical handling equipment impact, pallet impact or a system breakdown is acceptably low.
This document is limited to:
— single deep adjustable beam pallet racking operated with industrial trucks;
— single and double deep adjustable beam pallet racking operated with stacker cranes;
— drive-in and drive through racking systems operated with industrial trucks;
— cantilever racking systems operated with industrial trucks.
This document does not apply to specialized types of equipment such as automated trucks, miniload, satellite systems, systems involving the use of articulated trucks, trucks using intrusive stacking methods or industrial truck serviced rack-clad buildings.
This document specifically excludes the tolerances and deformation of the industrial trucks, stacker cranes and floors.
It is the responsibility of the specifier in cooperation with the client or user to ensure that the tolerances, deformations and clearances, as quoted in this document are acceptable for safe operation of the overall system considering all factors of influence and the user informed by means such as operation instructions. The specifier can carry out appropriate design/calculations to vary some of the parameters provided that an equivalent safe operation is achieved.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16681:2016(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design
SIST EN 16681:2016

This European Standard specifies the structural design requirements applicable to all types of adjustable pallet racking systems fabricated from steel members, intended for storage of unit loads and subject to seismic actions.
This European Standard gives also guidelines for the design of clad rack buildings in seismic zones, where requirements are not covered in the EN 1998 series.
This European Standard does not cover other generic types of storage structures. Specifically, this European Standard does not apply to mobile storage systems, drive-in, drive-through and cantilever racks or static steel shelving systems.
This European Standard does not apply to the design of seismic isolated racking structures.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15878:2010(Main)
Steel static storage systems - Terms and definitions
SIST EN 15878:2010

This European Standard specifies terms and definitions for steel storage systems, as listed in Table 1, and their basic components and accessories.
NOTE   Terms and definitions for mechanical handling equipment and load make-up accessories are included in informative annexes.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15629:2008(Main)
Steel static storage systems - Specification of storage equipment
SIST EN 15629:2009

This European Standard supplies guidelines for the technical specification to allow the design of racking and shelving in its various forms such as adjustable pallet racking (APR), crane serviced racking, drive-in racking (DIR), cantilever racking and shelving systems, including their various forms of construction, using manually operated and controlled mechanical handling systems. Some other forms of storage equipments are only partially covered and further consideration, beyond the scope of this document, may be required.
This European Standard gives guidance for the specifier of storage systems to coordinate suppliers of all equipment including individual responsibilities.
This European Standard does not cover storage equipments manufactured from materials other than steel (except for certain accessories) and equipment intended to be used for domestic storage purposes.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15635:2008(Main)
Steel static storage systems - Application and maintenance of storage equipment
SIST EN 15635:2009

This European Standard gives guidelines for operational aspects relevant to structural safety of storage systems. Such systems operate with heavy mechanical handling equipment working in close proximity to static storage equipment. This European Standard minimizes the risk and consequences of unsafe operation or damage to the structure. Some other forms of storage equipment are only partially covered and further consideration, beyond the scope of this European Standard, can be required.
This European Standard gives guidance in conjunction with prEN 15512, EN 15620, and EN 15629 to ensure that the specifier, user and designer are aware of the constraints in each other’s area to allow a safe design to be produced.
This European Standard specifically excludes storage equipment manufactured form materials other than steel (except for certain accessories) and equipment intended to be used for domestic storage purposes.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15512(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
oSIST prEN 15512:2017

This European Standard specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This European Standard gives guidelines for the design of clad rack buildings where requirements are not covered in the EN 1993 series. The requirements of this European Standard also apply to ancillary structures, where rack components are employed as the main structural members.
This European Standard does not cover other generic types of storage structures. Specifically, this European Standard does not apply to mobile storage systems, drive-in, drive-through, pallet live storage, push back, shuttle systems, systems where two or more cranes operates one above another in the same aisle and cantilever racks or static steel shelving systems.
For the specific design of adjustable pallet racking for use in Seismic areas, this standard should be used in combination with EN 16681 Adjustable pallet racking systems — Principles for seismic design.

  • Draft
    188 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 528:2021+A1:2022(Main)
Rail dependent storage and retrieval equipment - Safety requirements for S/R machines
SIST EN 528:2021+A1:2022

This document applies to all types of Storage and Retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. These machines shall embody lifting means along a mast and may include lateral handling facilities. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic.
S/R-machine-related satellite vehicles according to definition 3.20 are included as a load-handling-device (LHD).
References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines.
This document deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse (see Annex F "List of significant hazards")).
This document applies to machines and equipment that are manufactured after the date of issue of this document.
Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A.
Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. extremely high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff.
This document also deals with the technical requirements for electromagnetic compatibility (EMC).

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    113 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15512:2020+A1:2022(Main)
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
SIST EN 15512:2021+A1:2022

This document specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.
This document gives guidelines for the design of clad rack buildings where requirements are not covered in the EN 1993 series. The requirements of this document also apply to ancillary structures, where rack components are employed as the main structural members.
This document does not cover other generic types of storage structures. Specifically, this document does not apply to mobile storage systems, drive-in, drive-through, pallet live storage, push back, shuttle systems, systems where two or more cranes operates one above another in the same aisle and cantilever racks or static steel shelving systems.
For the specific design of adjustable pallet racking for use in seismic areas, this document is to be used in combination with EN 16681.

  • Standard
    182 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15620:2021(Main)
Steel static storage systems - Tolerances, deformations and clearances
SIST EN 15620:2021

This document specifies tolerances, deformations and clearances that pertain to the production, assembly and erection and performance under load of pallet racking and cantilever racking. These tolerances, deformations and clearances are important in relation to the functional requirements and ensuring the proper interaction of the handling equipment used by personnel, trained and qualified as competent, in association with the specific type of racking system. The interaction conditions are also important in determining the reliability of the storage system to ensure that the chance of mechanical handling equipment impact, pallet impact or a system breakdown is acceptably low.
This document is limited to:
— single deep adjustable beam pallet racking operated with industrial trucks;
— single and double deep adjustable beam pallet racking operated with stacker cranes;
— drive-in and drive through racking systems operated with industrial trucks;
— cantilever racking systems operated with industrial trucks.
This document does not apply to specialized types of equipment such as automated trucks, miniload, satellite systems, systems involving the use of articulated trucks, trucks using intrusive stacking methods or industrial truck serviced rack-clad buildings.
This document specifically excludes the tolerances and deformation of the industrial trucks, stacker cranes and floors.
It is the responsibility of the specifier in cooperation with the client or user to ensure that the tolerances, deformations and clearances, as quoted in this document are acceptable for safe operation of the overall system considering all factors of influence and the user informed by means such as operation instructions. The specifier can carry out appropriate design/calculations to vary some of the parameters provided that an equivalent safe operation is achieved.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day