CEN/TR 17068:2017
(Main)Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP)
Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP)
This Technical Report provides guidance for CE marking and Declaration of Performance (DoP) for sealants for joints in building construction.
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Anleitung für die CE-Kennzeichnung und die Leistungserklärung (DoP)
Dieser Technische Bericht enthält eine Anleitung für die CE-Kennzeichnung und die Leistungserklärung (DoP) für Fugendichtstoffe für den Hochbau.
Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Propositions de marquage CE et de déclaration des performances (DoP)
Le présent Rapport technique fournit des propositions de marquage CE et de déclaration des performances (DoP) pour les mastics pour joints dans la construction immobilière
Tesnilne mase za nekonstrukcijske stike v stavbah in na površinah za pešce - Navodilo za CE-označevanje in izjava o lastnostih
To tehnično poročilo podaja navodila za CE-označevanje in izjavo o lastnostih tesnilnih mas za stike v stavbah.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
7HVQLOQHPDVH]DQHNRQVWUXNFLMVNHVWLNHYVWDYEDKLQQDSRYUãLQDK]DSHãFH
1DYRGLOR]D&(R]QDþHYDQMHLQL]MDYDRODVWQRVWLK
Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance
for CE marking and Declaration of Performance (DoP)
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen -
Anleitung für die CE-Kennzeichnung und die Leistungserklärung
Ta slovenski standard je istoveten z: CEN/TR 17068:2017
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN/TR 17068
TECHNICAL REPORT
RAPPORT TECHNIQUE
February 2017
TECHNISCHER BERICHT
ICS 91.100.50
English Version
Sealants for non-structural use in joints in buildings and
pedestrian walkways - Guidance for CE marking and
Declaration of Performance (DoP)
Mastics pour joints pour des usages non structuraux Fugendichtstoffe für nicht tragende Anwendungen in
dans les constructions immobilières et pour chemins Gebäuden und Fußgängerwegen - Anleitung für die CE-
piétonniers - Lignes directrices concernant le Kennzeichnung und die Leistungserklärung
marquage CE et la déclaration des performances (DoP)
This Technical Report was approved by CEN on 6 February 2017. It has been drawn up by the Technical Committee CEN/TC 349.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17068:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Example of DOP . 5
4 Examples of CE marking . 7
4.1 Background . 7
4.2 Example of CE marking . 7
4.3 Example of an additional customer information . 9
Bibliography . 10
European foreword
This document (CEN/TR 17068:2017) has been prepared by Technical Committee CEN/TC 349
“Sealants for joints in building construction”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Introduction
In 2015, as it was in line with the provisions in Subclause 11.4 of the CEN-CENELEC Internal
Regulations, BT/TCMG on behalf of BT decides that Technical Committees preparing hENs in support of
Regulation EU 305/211 (CPR - Construction Products Regulation) could develop Technical Reports to
include examples of CE marking and Declaration of Performance (DoP).
These examples are especially useful for SMEs.
This Technical Report does not supersede the provisions of the CPR.
1 Scope
This Technical Report provides guidance for CE marking and Declaration of Performance (DoP) for
sealants for joints in building construction.
2 Normative references
Not applicable.
3 Example of DOP
This clause gives an example of a DoP that may be used for a sealant intended to be used in joints only
on the internal side of facade elements:
DECLARATION OF PERFORMANCE
No. 00001 – DOP - 2017/05/12
1. Unique identification code of the product-type:
Easy seal
2. Intended use/es:
Interior facade sealant (F INT)
3. Manufacturer:
AnyCo SA,
PO Box 21
B-1050 Brussels, Belgium
Tel.:+32987654321
Fax: +32123456789
e-mail: anyco.sa@provider.be
4. Authorized representative:
Not relevant
5. System/s of AVCP:
System 4 for the type testing
System 3 for the reaction to fire
6. Harmonized standard:
EN 15651-1:2017
Notified body/-ies:
Notified testing laboratory No. 1234 performed the testing of the reaction to fire
7. Declared performance/s:
Essential characteristics Performance System/s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.