EN 13172:2008
(Main)Thermal insulating products - Evaluation of conformity
Thermal insulating products - Evaluation of conformity
This European Standard specifies the procedures and the criteria for the evaluation of the conformity of a thermal insulating product with the relevant European product specification.
Wärmedämmstoffe - Konformitätsbewertung
Diese Europäische Norm legt die Verfahren und die Anforderungen für die Bewertung der Konformität eines
Wärmedämmstoffes mit der entsprechenden europäischen Produktnorm fest.
Produits isolant thermiques - Evaluation de la conformité
La présente Norme européenne spécifie les procédures et les critères pour l’évaluation de la conformité d’un
produit isolant thermique avec les spécifications européennes du produit correspondant.
Toplotnoizolacijski proizvodi - Ugotavljanje skladnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2008
1DGRPHãþD
SIST EN 13172:2002
SIST EN 13172:2002/A1:2005
Toplotnoizolacijski proizvodi - Ugotavljanje skladnosti
Thermal insulating products - Evaluation of conformity
Wärmedämmstoffe - Konformitätsbewertung
Produits isolant thermiques - Evaluation de la conformité
Ta slovenski standard je istoveten z: EN 13172:2008
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 13172
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 91.100.60 Supersedes EN 13172:2001
English Version
Thermal insulating products - Evaluation of conformity
Produits isolant thermiques - Evaluation de la conformité Wärmedämmstoffe - Konformitätsbewertung
This European Standard was approved by CEN on 12 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13172:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.4
1 Scope.5
2 Normative references.5
3 Terms and definitions .5
4 General requirements.5
5 Requirements for factory production control - Tasks for the manufacturer.6
5.1 General.6
5.2 Organisation.7
5.2.1 General.7
5.2.2 Responsibility and authority .7
5.2.3 Management representative for factory production control .7
5.2.4 Management review.7
5.3 Quality manual .7
5.4 Inspection and testing.7
5.4.1 General.7
5.4.2 Test equipment .8
5.4.3 Inspection and testing of raw materials and other constituent materials .8
5.4.4 Inspection and testing during manufacture.9
5.4.5 Product testing.9
5.4.6 Inspection and test status .10
5.4.7 Inspection and test records (manufacturer's log).10
5.5 Actions in the case of nonconforming products.10
5.6 Handling, storage, packaging, and marking of products .10
5.7 Traceability of products .11
5.8 Training of personnel .11
6 Initial type testing .11
Annex A (informative) Certification of conformity (not for CE marking purposes).12
A.1 Bodies involved in the evaluation of conformity procedure.12
A.2 Tasks for the approved body.12
A.2.1 General.12
A.2.2 Initial inspection.12
A.2.3 Initial type testing .12
A.2.4 Continuous surveillance .13
A.3 Conformity mark.16
A.3.1 General.16
A.3.2 Certificate of conformity .16
A.3.3 Withdrawal of certificate .17
Annex B (informative) Certification of conformity (for products of reaction to fire classes under system
1 .18
B.1 Bodies involved in the evaluation of conformity procedure.18
B.2 Tasks for the approved body.18
B.2.1 General.18
B.2.2 Initial inspection of factory and factory production control .18
B.2.3 Initial type testing .19
B.2.4 Continuous surveillance, assessment and approval of the factory production control.19
B.3 Conformity mark.21
B.3.1 General.21
B.3.2 Certificate of conformity .21
B.3.3 Withdrawal of certificate .21
Annex C (informative) Declaration of conformity by the manufacturer (for the performance requirements
under system 3 ) .22
C.1 Bodies involved in the evaluation of conformity procedure.22
C.2 Tasks for the approved body .22
C.2.1 General.22
C.2.2 Initial type testing .22
C.3 Conformity mark.23
C.3.1 General.23
C.3.2 Declaration of conformity .23
Annex D (informative) Declaration of conformity by the manufacturer (for products of reaction to fire
classes under system 4 ) .24
D.1 Conformity mark.24
Annex E (informative) Guidance on the use of Annex(es).25
E.1 CE marking.25
E.2 Voluntary product certification .26
E.3 Overview of the elements of the evaluation of conformity systems.26
Annex F (informative) Criteria for assessing non-conformity – Procedures in case of a complaint .27
F.1 Complaint on the product declaration.27
F.1.1 General.27
F.1.2 Complaint on the declared thermal resistance or thermal conductivity .27
F.1.3 Complaint on other characteristics .28
F.2 Complaint on a lot .28
Bibliography.29
Foreword
This document (EN 13172:2008) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating
materials and products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn at the latest
by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13172:2001.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association, and supports essential requirements of EU Directive 89/106/EC.
This European Standard contains six informative Annexes:
Annex A Certification of conformity (not for CE marking purposes)
Annex B Certification of conformity (for products of reaction to fire classes under system 1)
Annex C Declaration of conformity by the manufacturer (for the performance requirements under system 3)
Annex D Declaration of conformity by the manufacturer (for products of reaction to fire classes under system 4)
Annex E Guidance on the use of Annex(es)
Annex F Criteria for assessing non-conformity – Procedure in case of a complaint
Evaluation of conformity is necessary for products in order to provide support for CE marking and for voluntary
certification. The guidance contained in Annex ZA of the product standards will determine which of the above
Annexes shall be used for CE marking.
Annex E describes how to use the Annexes together with the main body of this stan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.