EN ISO 9856:2003

Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)

ISO 9856:2003 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus. It is not applicable or valid for light conveyor belts as described in EN 873.

Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung des Elastizitätsmoduls (ISO 9856:2003)

Courroies transporteuses - Détermination de l'allongement élastique et permanent et calcul du module d'élasticité (ISO 9856:2003)

L'ISO 9856:2003 spécifie une méthode de détermination de l'allongement élastique et permanent d'une courroie transporteuse et de calcul du module d'élasticité. Elle n'est ni applicable ni appropriée pour les courroies transporteuses légères telles que décrites dans l'EN 873.

Trakovi tračnih transporterjev – Določitev elastičnega in trajnega raztezka ter izračun modula elastičnosti (ISO 9856:2003)

Ta mednarodni standard opisuje metodo za določanje elastičnega in trajnega raztezka traka tračnega transporterja ter izračun modula elastičnosti. Standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev iz standarda EN 873.

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2003
• Withdrawal Date: 25-Oct-2016
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188 - Conveyor belts
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Oct-2016
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 9856:2004 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)

Relations

• Replaces: EN ISO 9856:1995 - Conveyor belts - Determination of elastic modulus (ISO 9856:1989)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 9856:2016 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016)
• Effective Date: 02-Nov-2016
• Amended By: EN ISO 9856:2003/A1:2012 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9856:2004
01-junij-2004
1DGRPHãþD
SIST EN ISO 9856:1997
7UDNRYLWUDþQLKWUDQVSRUWHUMHY±'RORþLWHYHODVWLþQHJDLQWUDMQHJDUD]WH]NDWHU
L]UDþXQPRGXODHODVWLþQRVWL,62
Conveyor belts - Determination of elastic and permanent elongation and calculation of
elastic modulus (ISO 9856:2003)
Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung
des Elastizitätsmoduls (ISO 9856:2003)
Courroies transporteuses - Détermination de l'allongement élastique et permanent et
calcul du module d'élasticité (ISO 9856:2003)
Ta slovenski standard je istoveten z: EN ISO 9856:2003
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 9856:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9856:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 9856:2004
EUROPEAN STANDARD
EN ISO 9856
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 53.040.20 Supersedes EN ISO 9856:1995
English version
Conveyor belts - Determination of elastic and permanent
elongation and calculation of elastic modulus (ISO 9856:2003)
Courroies transporteuses - Détermination de l'allongement Fördergurte - Bestimmung der elastischen und dauerhaften
élastique et permanent et calcul du module d'élasticité Dehnung und Berechnung des Elastizitätsmoduls (ISO
(ISO 9856:2003) 9856:2003)
This European Standard was approved by CEN on 2 December 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9856:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9856:2004
EN ISO 9856:2003 (E)
Foreword
This document (EN ISO 9856:2003) has been prepared by Technical Committee ISO/TC 41
"Pulleys and belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188
"Conveyor belts", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2004, and conflicting national
standards shall be withdrawn at the latest by June 2004.
This document supersedes EN ISO 9856:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 9856:2003 has been approved by CEN as EN ISO 9856:2003 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9856:2004
INTERNATIONAL ISO
STANDARD 9856
Second edition
2003-12-15
Conveyor belts — Determination of elastic
and permanent elongation and calculation
of elastic modulus
Courroies transporteuses — Détermination de l'allongement élastique et
permanent et calcul du module d'élasticité

Reference number
ISO 9856:2003(E)
©
ISO 2003

---------------------- Page: 5 ----------------------

SIST EN ISO 9856:2004
ISO 9856:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and ins
...