FprCEN/TS 17831
(Main)Cycles - Electrically power assisted cycles - Anti-tampering measures
Cycles - Electrically power assisted cycles - Anti-tampering measures
This document is intended to cover anti-tampering requirements of EN 15194:2017, 4.2.17. It provides reproducible tests methods recognized by the market aiming at protecting safety and fighting counterfeiting of electric power assisted cycles.
Fahrräder - Elektromotorisch unterstützte Räder - Maßnahmen zum Schutz vor Manipulationen - Reproduzierbare Tests zur Fälschungsbekämpfung
Cycles - Cycles à assistance électrique - Mesures anti-débridage
Kolesa - Kolesa z električnim pomožnim pogonom - Ukrepi proti nedovoljenim posegom
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17831:2022
01-november-2022
Kolesa - Kolesa z električnim pomožnim pogonom - Ukrepi proti nedovoljenim
posegom
Cycles - Electrically power assisted cycles - Anti-tampering measures
Fahrräder - Elektromotorisch unterstützte Räder - Maßnahmen zum Schutz vor
Manipulationen - Reproduzierbare Tests zur Fälschungsbekämpfung
Cycles - Cycles à assistance électrique - Mesures anti-débridage
Ta slovenski standard je istoveten z: FprCEN/TS 17831
ICS:
43.150 Kolesa Cycles
kSIST-TS FprCEN/TS 17831:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------kSIST-TS FprCEN/TS 17831:2022
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17831:2022
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17831
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2022
ICS 43.150
English Version
Cycles - Electrically power assisted cycles - Anti-tampering
measures
Cycles - Cycles à assistance électrique - Mesures anti- Fahrräder - Elektromotorisch unterstützte Räder -
débridage Maßnahmen zum Schutz vor Manipulationen -Reproduzierbare Tests zur Fälschungsbekämpfung
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 333.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17831:2022 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17831:2022
FprCEN/TS 17831:2022 (E)
Contents Page
European foreword ............................................................................................................................................ 3
1 Scope .......................................................................................................................................................... 4
2 Normative references .......................................................................................................................... 4
3 Terms and definitions ......................................................................................................................... 4
4 Anti-tampering requirements .......................................................................................................... 4
4.1 General...................................................................................................................................................... 4
4.2 Requirements for powertrain anti-tampering ........................................................................... 5
4.3 Test procedures for powertrain anti-tampering....................................................................... 5
---------------------- Page: 4 ----------------------kSIST-TS FprCEN/TS 17831:2022
FprCEN/TS 17831:2022 (E)
European foreword
This document (FprCEN/TS 17831:2022) has been prepared by Technical Committee CEN/TC 333
“Cycles”, the secretariat of which is held by UNI.This document is currently submitted to the Vote on TS.
---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17831:2022
prCEN/TS 17831:2022 (E)
1 Sc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.