EN ISO 15083:2020/A11:2023
(Amendment)Small craft - Bilge-pumping systems
Small craft - Bilge-pumping systems
Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO 15083:2020)
No scope available
Petit navires - Systèmes de pompe de cale
Mala plovila - Kalužni sistemi (na čolnih) - Dopolnilo A11
General Information
Relations
Overview
EN ISO 15083:2020/A11:2023 is a European standard amendment addressing bilge-pumping systems for small craft. Prepared by the Technical Committee CEN/TC 464 “Small Craft” and published by CEN, this amendment updates the EN ISO 15083:2020 to ensure alignment with the latest safety and technical requirements. It applies to systems designed for the removal of normal bilge water accumulation in small boats and supports compliance with the essential requirements of the EU Directive 2013/53/EU on recreational craft.
This standard is vital for manufacturers, designers, and regulatory bodies involved in the marine industry, particularly those focused on small vessels. EN ISO 15083:2020/A11:2023 promotes safety, reliability, and conformity of bilge-pumping systems across CEN member countries and other regions recognizing European standards.
Key Topics
Scope of Bilge-Pumping Systems
The standard specifies requirements for bilge pumps used to remove water typically accumulated on board small craft. It explicitly excludes pumps intended for emergency damage control and does not cover related components such as cockpits, wells, and ventilation fittings.Compliance with EU Directive 2013/53/EU
EN ISO 15083:2020/A11:2023 offers a voluntary but recognized method to demonstrate conformity with essential health and safety requirements defined in the Directive for recreational craft and personal watercraft.Standardization and Harmonization
This amendment must be adopted as a national standard by CEN members by October 2023, replacing conflicting standards. It ensures uniformity in regulatory compliance and product quality across multiple European countries.Referenced Standards for Bilge Systems
The document references key international and European standards essential for comprehensive small craft safety, including:- ISO 8666 (Small craft principal data)
- ISO 8849 (Electrically operated DC bilge pumps)
- ISO 9093 (Seacocks and through-hull fittings)
- ISO 12217 series (Stability and buoyancy assessment)
- ISO 13297 (Electrical systems - AC installations)
- IEC 60529 (Degrees of protection provided by enclosures)
Patent Rights Notice
The standard acknowledges that some system elements may be subject to patent rights, advising users to verify these aspects during implementation.
Applications
Small Craft Manufacturing
Ensuring that bilge-pumping systems installed during production meet recognized safety and performance criteria to comply with European market regulations.Marine Equipment Design
Guiding designers and engineers in developing efficient and compliant bilge-pumping solutions tailored to the unique conditions of small boats.Regulatory Compliance and Certification
Assisting manufacturers and testing bodies in applying a recognized standard as evidence for CE marking and regulatory approval within the EU and EFTA.Maintenance and Upgrading of Existing Systems
Providing a reference framework for maintenance professionals and boat owners aiming to upgrade or verify bilge-pumping systems’ effectiveness and conformity.Quality Assurance Programs
Supporting companies in implementing quality control measures in accordance with standardized safety and functionality benchmarks.
Related Standards
To ensure full compliance and operational safety of small craft bilge-pumping systems, EN ISO 15083:2020/A11:2023 should be used in conjunction with the following key standards:
- ISO 8666:2020 - Small craft principal dimensions and data
- ISO 8849:2020 - Electrically operated direct-current bilge pumps
- ISO 9093-1:2020 - Seacocks and through-hull fittings
- ISO 12217 Series - Stability and buoyancy assessment and categorization for both sailing and non-sailing boats
- ISO 13297:2020/Amd 1:2022 - Electrical systems for alternating current installations on small craft
- IEC 60529:2013 - Degrees of protection provided by enclosures (IP Code)
Adherence to these interconnected standards ensures comprehensive safety, operational reliability, and regulatory compliance for small craft, particularly relating to bilge water management systems.
Keywords: EN ISO 15083:2020/A11:2023, bilge-pumping systems, small craft, CEN standard, European marine regulation, recreational craft safety, bilge pump requirements, EN ISO 15083 amendment, EU Directive 2013/53/EU compliance, marine equipment standards, small boat bilge water removal, bilge pump certification.
Frequently Asked Questions
EN ISO 15083:2020/A11:2023 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Small craft - Bilge-pumping systems". This standard covers: No scope available
No scope available
EN ISO 15083:2020/A11:2023 is classified under the following ICS (International Classification for Standards) categories: 47.080 - Small craft. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15083:2020/A11:2023 has the following relationships with other standards: It is inter standard links to EN ISO 15083:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15083:2020/A11:2023 is associated with the following European legislation: EU Directives/Regulations: 2013/53/EU; Standardization Mandates: M/542. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 15083:2020/A11:2023 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2023
Mala plovila - Kalužni sistemi (na čolnih) - Dopolnilo A11
Small craft - Bilge-pumping systems
Kleine Wasserfahrzeuge - Lenzeinrichtungen
Petit navires - Systèmes de pompe de cale
Ta slovenski standard je istoveten z: EN ISO 15083:2020/A11:2023
ICS:
47.080 Čolni Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15083:2020/A11
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Bilge-pumping systems
Petit navires - Systèmes de pompe de cale Kleine Wasserfahrzeuge - Lenzeinrichtungen
This amendment A11 modifies the European Standard EN ISO 15083:2020; it was approved by CEN on 15 February 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15083:2020/A11:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
European foreword
This document (EN ISO 15083:2020/A11:2023) has been prepared by Technical CEN/TC 464 “Small
Craft” the secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 15083:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2023,
and conflicting national standards shall be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...