EN ISO 15083:2020

Small craft - Bilge-pumping systems (ISO 15083:2020)

This document specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a length of hull, LH, as defined in ISO 8666:2016, of up to 24 m.
This document does not set requirements for bilge pumps or bilge-pumping systems designed for damage control.

Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO 15083:2020)

Dieses Dokument legt Anforderungen für das Abpumpen oder alternative Möglichkeiten zum Entfernen von üblichen Mengen von Wasser fest, das sich in der Bilge ansammelt. Es gilt für kleine Wasserfahrzeuge mit einer Rumpflänge LH bis 24 m wie in ISO 8666:2016 festgelegt.
Dieses Dokument legt keine Anforderungen für Lenzpumpen oder Lenzeinrichtungen zum Zwecke der Leckbegrenzung fest.

Petit navires - Systèmes de pompes de cale (ISO 15083:2020)

Le présent document spécifie les exigences relatives au pompage ou moyens alternatifs conçus pour évacuer les accumulations normales d'eau de cale pour les petits navires d'une longueur de coque LH, comme définie dans l'ISO 8666:2016 est inférieure ou égale à 24 m.
Ce document ne définit pas les exigences applicables aux pompes de cale ou aux systèmes de pompage de cale conçus pour contrôler les avaries de coque.

Mala plovila - Kalužni sistemi (na čolnih) (ISO 15083:2020)

Standard EN ISO 15083 določa zahteve za črpanje ali alternativne načine odstranjevanja običajnih količin nakopičene kalužne vode za mala plovila z dolžino trupa (LH) do 24 m, kot je opredeljeno v standardu ISO 8666:2016. Ta dokument ne določa zahtev za kalužne črpalke ali kalužne sisteme, namenjene za obvladovanje poškodb.

General Information

• Status: Published
• Publication Date: 21-Apr-2020
• Withdrawal Date: 30-Oct-2020
• ICS: 47.080 - Small craft
• Technical Committee: CEN/TC 464 - Small Craft
• Drafting Committee: CEN/TC 464 - Small Craft
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Apr-2020
• Completion Date: 22-Apr-2020
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: SIST EN ISO 15083:2020 - Small craft - Bilge-pumping systems (ISO 15083:2020)

Relations

• Replaces: EN ISO 15083:2018 - Small craft - Bilge-pumping systems (ISO 15083:2003)
• Effective Date: 11-May-2020
• Amended By: EN ISO 15083:2020/A11:2023 - Small craft - Bilge-pumping systems
• Effective Date: 06-Mar-2023
• Amended By: EN ISO 15083:2020/A1:2022 - Small craft - Bilge-pumping systems - Amendment 1 (ISO 15083:2020/Amd 1:2022)
• Effective Date: 22-Sep-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15083:2020
01-julij-2020
Nadomešča:
SIST EN ISO 15083:2018
Mala plovila - Kalužni sistemi (na čolnih) (ISO 15083:2020)
Small craft - Bilge-pumping systems (ISO 15083:2020)
Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO 15083:2020)
Petit navires - Systèmes de pompes de cale (ISO 15083:2020)
Ta slovenski standard je istoveten z: EN ISO 15083:2020
ICS:
47.080 Čolni Small craft
SIST EN ISO 15083:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15083:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 15083:2020


EN ISO 15083
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 15083:2018
English Version

Small craft - Bilge-pumping systems (ISO 15083:2020)
Petit navires - Systèmes de pompes de cale (ISO Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO
15083:2020) 15083:2020)
This European Standard was approved by CEN on 18 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15083:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15083:2020
EN ISO 15083:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15083:2020
EN ISO 15083:2020 (E)
European foreword
This document (EN ISO 15083:2020) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15083:2018.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15083:2020 has been approved by CEN as EN ISO 15083:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 15083:2020
EN ISO 15083:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prep
...