EN ISO 10077-2:2017/prA1

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Amendment 1 (ISO 10077 2:2017/DAM 1:2023)

Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des Wärmedurchgangskoeffizienten - Teil 2: Numerisches Verfahren für Rahmen - Änderung 1 (ISO 10077 2:2017/DAM 1:2023)

Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de transmission thermique - Partie 2: Méthode numérique pour les encadrements - Amendement 1 (ISO 10077 2:2017/DAM 1:2023)

Toplotne značilnosti oken, vrat in polken - Izračun toplotne prehodnosti - 2. del: Računska metoda za okvirje - Dopolnilo A1 (ISO 10077 2:2017/DAM 1:2023)

General Information

• Status: Not Published
• Publication Date: 01-Dec-2024
• ICS: 91.060.50 - Doors and windows
• ICS: 91.120.10 - Thermal insulation of buildings
• Technical Committee: CEN/TC 89 - Thermal performance of buildings and building components
• Drafting Committee: CEN/TC 89 - Thermal performance of buildings and building components
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 10-Jul-2024
• Completion Date: 10-Jul-2024
• Ref Project: SIST EN ISO 10077-2:2017/oprA1:2023 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames - Amendment 1 (ISO 10077 2:2017/DAM 1:2023)

Relations

• Amends: EN ISO 10077-2:2017 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
• Effective Date: 20-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2023
Toplotne značilnosti oken, vrat in polken - Izračun toplotne prehodnosti - 2. del:
Računska metoda za okvirje - Dopolnilo A1 (ISO 10077 2:2017/DAM 1:2023)
Thermal performance of windows, doors and shutters - Calculation of thermal
transmittance - Part 2: Numerical method for frames - Amendment 1 (ISO 10077
2:2017/DAM 1:2023)
Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des
Wärmedurchgangskoeffizienten - Teil 2: Numerisches Verfahren für Rahmen - Änderung
1 (ISO 10077 2:2017/DAM 1:2023)
Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de
transmission thermique - Partie 2: Méthode numérique pour les encadrements -
Amendement 1 (ISO 10077 2:2017/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 10077-2:2017/prA1
ICS:
91.060.50 Vrata in okna Doors and windows
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT AMENDMENT
ISO 10077-2:2017/DAM 1
ISO/TC 163/SC 2 Secretariat: SN
Voting begins on: Voting terminates on:
2023-02-16 2023-05-11
Thermal performance of windows, doors and shutters —
Calculation of thermal transmittance —
Part 2:
Numerical method for frames
AMENDMENT 1
Performance thermique des fenêtres, portes et fermetures — Calcul du coefficient de transmission
thermique —
Partie 2: Méthode numérique pour les encadrements
AMENDEMENT 1
ICS: 91.060.50; 91.120.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 10077-2:2017/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO 10077-2:2017/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 10077-2:2017/DAM 1
ISO/TC 163/SC 2 Secretariat: SN
Voting begins on: Voting terminates on:

Thermal performance of windows, doors and shutters —
Calculation of thermal transmittance —
Part 2:
Numerical method for frames
AMENDMENT 1
Performance thermique des fenêtres, portes et fermetures — Calcul du coefficient de transmission
thermique —
Partie 2: Méthode numérique pour les encadrements
AMENDEMENT 1
ICS: 91.060.50; 91.120.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO 10077-2:2017/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO 10077-2:2017/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
...