EN ISO 12567-1:2010
(Main)Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
ISO 12567-1:2010 specifies a method to measure the thermal transmittance of a door or window system. It is applicable to all effects of frames, sashes, shutters, blinds, screens, panels, door leaves and fittings.
It is not applicable to edge effects occurring outside the perimeter of the specimen, energy transfer due to solar radiation on the specimen, effects of air leakage through the specimen, and roof windows and projecting products, where the external face projects beyond the cold side roof surface.
Wärmetechnisches Verhalten von Fenstern und Türen - Bestimmung des Wärmedurchgangskoeffizienten mittels des Heizkastenverfahrens - Teil 1: Komplette Fenster und Türen (ISO 12567-1:2010)
Dieser Teil von ISO 12567 legt ein Verfahren zur Messung des Wärmedurchgangskoeffizienten eines
Tür- oder Fenstersystems fest. Sie erfasst alle Einflüsse von Rahmen, Schiebeflügeln, Fensterläden,
Abschlüssen, Abschirmungen, Blenden, Türblättern und Befestigungszubehörteilen.
Sie umfasst nicht:
⎯ Randeinflüsse außerhalb des Umfanges des Probekörpers;
⎯ Energieübertragung infolge Sonneneinstrahlung auf den Probekörper;
⎯ Einflüsse von Luftundichtigkeit durch den Probekörper;
⎯ Dachflächenfenster und auskragende Produkte, bei welchen die Verglasung über die kaltseitige
Wandfläche des Prüfrahmens hinausragt.
ANMERKUNG Bei Dachflächenfenstern und auskragenden Produkten kann das in ISO 12567-2 angegebene Verfahren
verwendet werden.
Anhang A gibt Berechnungsverfahren für Umgebungstemperaturen an.
Isolation thermique des fenêtres et portes - Détermination de la transmission thermique par la méthode à la boîte chaude - Partie 1: Fenêtres et portes complètes (ISO 12567-1:2010)
L'ISO 12567-1:2010 spécifie une méthode pour mesurer le coefficient de transmission thermique d'une fenêtre ou d'une porte. Elle est applicable à tous les effets des dormants, des ouvrants, des volets, des stores, des toiles, des panneaux, des ouvrants de portes et des éléments annexes d'une éprouvette.
Elle ne s'applique pas aux effets de bord à l'extérieur du périmètre de l'éprouvette, au transfert d'énergie dû au rayonnement solaire sur l'éprouvette, aux effets dus aux fuites d'air au travers de l'éprouvette, et aux fenêtres de toit ou en saillie où la face externe dépasse au-delà de la surface froide de la toiture.
Toplotne lastnosti oken in vrat - Ugotavljanje toplotne prehodnosti z metodo komorne naprave - 1. del: Celotna okna in vrata (ISO 12567-1:2010)
Ta del ISO 12567 določa metodo za merjenje toplotne prehodnosti sistema vrat ali oken. Velja za vse učinke obodov, okvirov, rolojev, senčnikov, zaslonov, opažev, vratnih kril in fitingov. Ne velja za – robne učinke, do katerih pride zunaj obsega vzorca, - energetski prenos, ki je posledica sončnega sevanja na vzorec, - učinke uhajanja zraka skozi vzorec in – strešna okna in štrleče dele, pri katerih zunanji del sega čez hladno stran strešne površine.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
SIST EN ISO 12567-1:2001
Toplotne lastnosti oken in vrat - Ugotavljanje toplotne prehodnosti z metodo
komorne naprave - 1. del: Celotna okna in vrata (ISO 12567-1:2010)
Thermal performance of windows and doors - Determination of thermal transmittance by
the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
Wärmetechnisches Verhalten von Fenstern und Türen -Bestimmung des
Wärmedurchgangskoeffizienten mittels des Heizkastenverfahrens - Teil 1: Komplette
Fenster und Türen (ISO 12567-1:2010)
Isolation thermique des fenêtres et portes - Détermination de la transmission thermique
par la méthode à la boîte chaude - Partie 1: Fenêtres et portes complètes (ISO 12567-
1:2010)
Ta slovenski standard je istoveten z: EN ISO 12567-1:2010
ICS:
91.060.50 Vrata in okna Doors and windows
91.120.10 Toplotna izolacija stavb Thermal insulation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 12567-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 91.060.50; 91.120.10 Supersedes EN ISO 12567-1:2000
English Version
Thermal performance of windows and doors - Determination of
thermal transmittance by the hot-box method - Part 1: Complete
windows and doors (ISO 12567-1:2010)
Isolation thermique des fenêtres et portes - Détermination Wärmetechnisches Verhalten von Fenstern und Türen -
de la transmission thermique par la méthode à la boîte Bestimmung des Wärmedurchgangskoeffizienten mittels
chaude - Partie 1: Fenêtres et portes complètes (ISO des Heizkastenverfahrens - Teil 1: Komplette Fenster und
12567-1:2010) Türen (ISO 12567-1:2010)
This European Standard was approved by CEN on 2 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12567-1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 12567-1:2010) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee CEN/TC 89
“Thermal performance of buildings and building components” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12567-1:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12567-1:2010 has been approved by CEN as a EN ISO 12567-1:2010 without any
modification.
INTERNATIONAL ISO
STANDARD 12567-1
Second edition
2010-07-01
Thermal performance of windows and
doors — Determination of thermal
transmittance by the hot-box method —
Part 1:
Complete windows and doors
Isolation thermique des fenêtres et portes — Détermination de la
transmission thermique par la méthode à la boîte chaude —
Partie 1: Fenêtres et portes complètes
Reference number
ISO 12567-1:2010(E)
©
ISO 2010
ISO 12567-1:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 12567-1:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms, definitions and symbols .2
3.1 Terms and definitions .2
3.2 Symbols.2
4 Principle.4
5 Requirements for test specimens and apparatus.10
5.1 General .10
5.2 Surround panels .10
5.3 Test specimens.10
5.4 Calibration panels .12
5.5 Temperature measurements and baffle positions .12
5.6 Air flow measurement.12
6 Test procedure.13
6.1 General .13
6.2 Calibration measurements .14
6.3 Measurement procedure for test specimens.17
6.4 Expression of results for standardized test applications .17
7 Test report.18
Annex A (normative) Environmental temperatures.19
Annex B (normative) Linear thermal transmittance of the edge zone .23
Annex C (informative) Design of calibration transfer standard .26
Annex D (informative) Example of calibration test and measurement of window specimen .30
Annex E (informative) Analytical calibration procedure using heat balance equations .39
Annex F (informative) Uncertainty analysis for hot boxes .41
Bibliography.52
ISO 12567-1:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12567-1 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the
built environment, Subcommittee SC 1, Test and measurement methods.
This second edition cancels and replaces the first edition (ISO 12567-1:2000), which has been technically
revised.
ISO 12567 consists of the following parts, under the general title Thermal performance of windows and
doors — Determination of thermal transmittance by the hot-box method:
⎯ Part 1: Complete windows and doors
1)
⎯ Part 2: Roof windows and other projecting windows
1) It is intended that, upon revision, the main element of the title of Part 2 will be aligned with the main element of the title
of Part 1.
iv © ISO 2010 – All rights reserved
ISO 12567-1:2010(E)
Introduction
The method specified in this part of ISO 12567 is based on ISO 8990. It is designed to provide both
standardized tests, which enable a fair comparison of different products to be made, and specific tests on
products for practical application purposes. The former specifies standardized specimen sizes and applied
test criteria.
The determination of the aggregate thermal transmittance is performed for conditions which are similar to the
actual situation of the window and door in practice.
INTERNATIONAL STANDARD ISO 12567-1:2010(E)
Thermal performance of windows and doors — Determination
of thermal transmittance by the hot-box method —
Part 1:
Complete windows and doors
1 Scope
This part of ISO 12567 specifies a method to measure the thermal transmittance of a door or window system.
It is applicable to all effects of frames, sashes, sh
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.