EN 1504-2:2004

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete

This Part of prEN 1504 specifies requirements for the identification, performance (including durability aspects), safety and evaluation of conformity of products and systems to be used for surface protection of concrete, to increase the durability of concrete and reinforced concrete structures, as well as for new concrete and for maintenance and repair work.
The surface protective methods covered by this standard are the following:
-   hydrophobic impregnation;
-   impregnation;
-   coating.
Flooring systems in buildings which are not intended to protect or reinstate the integrity of a concrete structure are standardised in EN 13813.
When products and systems complying with this standard are used in flooring applications that involve substantial mechanical loading , they should also satisfy the requirements of EN 13813.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton

Dieser Teil der prEN 1504 legt Anforderungen an die Identität, die Leistung (einschließlich Aspekten der Dauerhaftigkeit), die Sicherheit und die Beurteilung der Konformität von Produkten und Systemen fest, die für den Oberflächenschutz von Beton, zur Verbesserung der Dauerhaftigkeit von Beton? und Stahlbetontragwerken sowie für neuen Beton und für Instandhaltungs? und Instandsetzungsarbeiten angewendet werden.
In der vorliegenden Norm werden folgende Oberflächenschutzverfahren behandelt:
-   hydrophobierende Imprägnierung;
-   Imprägnierung;
-   Beschichtung.
In Gebäuden verwendete Bodenbelagssysteme, die nicht dafür vorgesehen sind, die Dauerhaftigkeit eines Betontragwerkes zu schützen oder wiederherzustellen, sind in EN 13813 genormt.
Werden Produkte und Systeme, die dieser Norm entsprechen, als Bodenbelagssysteme angewendet, die wesentlichen mechanischen Beanspruchungen ausgesetzt sind, müssen sie auch die Anforderungen der EN 13813 erfüllen.

Produits et systèmes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 2: Systèmes de protection de surface pour béton

La présente norme spécifie les prescriptions pour l'identification, les performances (y compris les aspects de durabilité) et la sécurité des produits et systèmes devant être utilisés pour la protection de surface du béton, afin d'augmenter la durabilité du béton et des structures en béton armé, aussi bien pour un nouveau béton que pour des travaux de maintenance et réparation. Par conséquent, cette norme inclut également des propriétés particulères en plus des mesures de p protection de surface.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Definicije, zahteve, kontrola kakovosti in ovrednotenje skladnosti - 2. del: Sistemi za zaščito površine betona

General Information

• Status: Published
• Publication Date: 19-Oct-2004
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.080.40 - Concrete structures
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 8/WG 1 - Surface protection systems
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 21-Apr-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 1504-2:2004 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concreteProduits et systemes pour la protection et la réparation de structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 2: Systemes de protection de surface pour bétonProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton91.080.40Betonske konstrukcijeConcrete structures01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:SIST EN 1504-2:2004enTa slovenski standard je istoveten z:EN 1504-2:200401-december-2004SIST EN 1504-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1504-2October 2004ICS 01.040.91; 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Definitions, requirements, quality control andevaluation of conformity - Part 2: Surface protection systems forconcreteProduits et systèmes pour la protection et la réparation destructures en béton - Définitions, prescriptions, maîtrise dela qualité et évaluation de la conformité - Partie 2:Systèmes de protection de surface pour bétonProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Definitionen,Anforderungen, Qualitätsüberwachung und Beurteilung derKonformität - Teil 2: Oberflächenschutzsysteme für BetonThis European Standard was approved by CEN on 30 July 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1504-2:2004: E

Minimum frequency of testing for factory production control.26 Annex B (informative)
Examples of the application of the classification system in three individual cases.28 Annex C (informative)
Release of dangerous substances.29 Annex ZA (informative)
Clauses addressing the provisions of EU Construction Products Directive.30 ZA.1 Scope and relevant characteristics.30 ZA.2 Attestation of conformity.38 ZA.2.1 System(s) of attestation of conformity.38 ZA 2.2 EC Certificate and Declaration of conformity.41 ZA.3 CE marking and labelling.43 Bibliography.46

1) To be published. 2) ENV 1504-9 will have to be modified when adopted as EN according to finalisation of this standard.

hydrophobic impregnation (H) 1.2 impregnation (I) 1.3 coating (C) for Principle 2 (MC): Moisture Control 2.1 hydrophobic impregnation (H) 2.2 coating (C) for Principle 5 (PR) Physical Resistance/Surface Improvement 5.1 coating (C) 5.2 impregnation (I) for Principle 6 (RC): Resistance to Chemicals 6.1 coating (C) for Principle 8 (IR): Increasing Resistivity by Limiting moisture content: 8.1 hydrophobic impregnation (H): 8.2 coating (C)
...