prEN 413-1
(Main)Masonry cement - Part 1: Composition, specifications and conformity criteria
Masonry cement - Part 1: Composition, specifications and conformity criteria
This document specifies the definition and composition of masonry cements as commonly used in Europe for the production of mortar for bricklaying and blocklaying and for rendering and plastering. It includes physical, mechanical and chemical requirements and defines strength classes. EN 413-1 also states the conformity criteria and the related rules. Necessary durability requirements are also given.
NOTE For normal applications the information given in EN 413-1, in EN 998-1 and in EN 998-2 is generally sufficient. However, in special cases, an exchange of additional information between the masonry cement producer and user can be helpful. The details of such an exchange are not within the scope of EN 413-1 but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
Putz- und Mauerbinder - Teil 1: Zusammensetzung, Anforderungen und Konformitätskriterien
Dieses Dokument legt die Definition und die Zusammensetzung von Putz- und Mauerbindern, die üblicherweise in Europa für Putz- und Mauerarbeiten verwendet werden, fest. Sie enthält physikalische, mechanische und chemische Anforderungen und definiert Festigkeitsklassen. Darüber hinaus enthält EN 413-1 die Konformitätskriterien und die damit verbundenen Regeln sowie notwendige Anforderungen an die Dauerhaftigkeit.
ANMERKUNG In der Regel sind die in EN 413-1, EN 998-1 und EN 998-2 enthaltenen Angaben für die übliche Anwendung ausreichend. In besonderen Fällen kann jedoch ein Austausch von zusätzlichen Informationen zwischen dem Hersteller von Putz- und Mauerbindern und dem Abnehmer hilfreich sein. Die Einzelheiten eines solchen Informationsaustauschs sind nicht Gegenstand von EN 413-1; sie sollten in Übereinstimmung mit nationalen Normen oder mit anderen Regelungen festgelegt werden oder können zwischen den betreffenden Parteien vereinbart werden.
Ciment à maçonner - Partie 1 : Composition, spécifications et critères de conformité
La présente Norme européenne spécifie la définition et la composition des ciments à maçonner généralement utilisés en Europe pour la production de mortier destiné au montage de briques et de blocs, ainsi qu’aux enduits intérieurs et extérieurs. Elle inclut les exigences relatives à leurs propriétés physiques, mécaniques et chimiques, et définit les classes de résistance. L’EN 413-1 stipule également les critères de conformité et les règles associées. Elle donne également les exigences de durabilité nécessaires.
NOTE Pour des applications normales, les informations données dans l’EN 413-1, l’EN 998-1 et l’EN 998-2 sont généralement suffisantes. Toutefois, dans des cas spéciaux, un échange d’informations supplémentaires entre le producteur de ciment à maçonner et l’utilisateur peut se révéler utile. Les détails d’un tel échange ne relèvent pas du domaine d’application de l’EN 413-1, mais il convient de les traiter conformément aux normes nationales ou autres règlements nationaux ; ils peuvent également faire l’objet d’un accord entre les parties concernées.
Zidarski cement - 1. del: Sestava, zahteve in merila skladnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2018
Zidarski cement - 1. del: Sestava, zahteve in merila skladnosti
Masonry cement - Part 1: Composition, specifications and conformity criteria
Putz- und Mauerbinder - Teil 1: Zusammensetzung, Anforderungen und
Konformitätskriterien
Ciment à maçonner - Partie 1 : Composition, spécifications et critères de conformité
Ta slovenski standard je istoveten z: prEN 413-1
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2018
ICS 91.100.10 Will supersede EN 413-1:2011
English Version
Masonry cement - Part 1: Composition, specifications and
conformity criteria
Ciment à maçonner - Partie 1 : Composition, Putz- und Mauerbinder - Teil 1: Zusammensetzung,
spécifications et critères de conformité Anforderungen und Konformitätskriterien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 51.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 413-1:2018 E
worldwide for CEN national Members.
Contents page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Notation . 8
5 Requirements . 8
5.1 General . 8
5.2 Constituents and composition . 8
5.3 Physical and mechanical requirements . 9
5.3.1 Fineness (sieve residue) . 9
5.3.2 Initial setting time . 9
5.3.3 Final setting time . 9
5.3.4 Soundness . 9
5.3.5 Fresh mortar requirements . 9
5.3.6 Compressive strength . 10
5.4 Chemical requirements . 10
5.5 Durability requirements . 11
6 Standard designation . 11
7 Conformity criteria . 11
7.1 General requirements . 11
7.2 Conformity criteria for physical, mechanical and chemical properties and
evaluation procedure . 12
7.2.1 General . 12
7.2.2 Statistical conformity criteria . 12
7.2.3 Single result conformity criteria . 16
7.3 Conformity criteria for masonry cement composition . 18
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No. 305/2011 . 19
ZA.1 Scope and relevant characteristics . 19
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 21
ZA.3 Assignment of AVCP tasks . 21
Bibliography . 23
Tables
Table 1 — Composition of masonry cements . 9
Table 2 — Fresh mortar requirements given as characteristic values . 10
Table 3 — Compressive strength requirements given as characteristic values . 10
Table 4 — Chemical requirements given as characteristic values . 11
Table 5 — Properties, test methods and minimum testing frequencies for the
autocontrol testing by the manufacturer, and the statistical assessment
procedure . 12
Table 6 — Required values of P and CR . 14
k
Table 7 — Acceptability constant . 15
Table 8 — Values of c . 16
A
Table 9 — Limit values for single results . 16
Table ZA.1 — Relevant clauses for product Masonry cement and intended use:
Preparation of mortar for bricklaying and blocklaying and rendering and
plastering . 19
Table ZA.3 — Assignment of AVCP tasks for Masonry cements under system 1+ . 22
European foreword
This document (prEN 413-1:2018) has been prepared by Technical Committee CEN/TC 51
“Cement and building limes”, the secretariat of which is held by NBN.
This document will supersede EN 413-1:2011.
The European standard, EN 413, Masonry cement, consists of the following parts:
— Part 1: Composition, specifications and conformity criteria;
— Part 2: Test methods.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
EN 413-1 has been prepared to provide a range of materials from which users of EN 998-1,
EN 998-2 and EN 1996-1-1 (Eurocode 6) can select with confidence to achieve the level of
strength and durability required of masonry and rendering.
The main changes from EN 413-1:2011 are as follows:
— a new Annex ZA addressing the provisions of the EU Construction Products Regulation (EU)
No: 305/2011.
Introduction
Masonry cement should be defined and specified precisely with sufficiently stringent
requirements to satisfy those who are responsible for the design and construction of buildings
and other structures for maximum safety and durability.
This European standard is a carefully balanced document that has been thoroughly discussed,
taking into account the need to provide clear definitions and specifications and to arrive at a
usable standard.
The requirements of this European standard are, where appropriate, based on the results from
tests on masonry cement in accordance with EN 196 Methods of testing cement. Strength is
measured on a standard mortar prepared in accordance with EN 196-1 with a fixed
water/cement ratio and compacted using the equipment described in EN 196-1. However, some
additional tests have been found necessary and these tests are described in EN 413-2.
CEN/TC 51 recognizes the importance of workability (cohesivity at standard consistence) of
mortars prepared from masonry cements. A test method is available in CR 13933, and in which
results of a test programme are also given. This test method was not found valid for standard
requirement purposes due to its lack of reproducibility, however it provides valuable
information for the manufacturers and users on the property in use of masonry cements.
The properties of bond and durability (resistance to frost and/or chemical attack) of mortars
are very important and appropriate mortar tests are being developed by CEN/TC 125, Masonry.
In many applications, particularly in severe environmental conditions, the choice of the
type/class of masonry cement from EN 413-1 can influence the durability of mortar, e.g. in
respect of frost and chemical resistance.
1 Scope
This document specifies the definition and composition of masonry cements as commonly used
in Europe for the production of mortar for bricklaying and blocklaying and for rendering and
plastering. It includes physical, mechanical and chemical requirements and defines strength
classes. EN 413-1 also states the conformity criteria and the related rules. Necessary durability
requirements are also given.
NOTE For normal applications the information given in EN 413-1, in EN 998-1 and in EN 998-2 is
generally sufficient. However, in special cases, an exchange of additional information between the
masonry cement producer and user can be helpful. The details of such an exchange are not within the
scope of EN 413-1 but should be dealt with in accordance with national standards or other regulations or
can be agreed between the parties concerned.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition cited
applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 196-1, Methods of testing cement — Part 1: Determination of strength
EN 196-2, Method of testing cement — Part 2: Chemical analysis of cement
EN 196-3, Methods of testing cement — Part 3: Determination of setting times and soundness
EN 196-6, Methods of testing cement — Part 6: Determination of fineness
EN 196-7, Methods of testing cement — Part 7: Methods of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.