Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard

This standard specifies the required characteristics and test applicable to sealing sleeves used in elements of connection according to EN 3155-002 and EN 4530-002.

Luft- und Raumfahrt - Dichtungshülsen zur Verwendung in Verbindungselementen - Teil 006: Dichtungshülsen für Leitungen mit einem Außendurchmesser von 4,68 mm bis 5,05 mm - Produktnorm

Diese Norm legt die Anforderungen und Prüfungen fest, die auf Dichtungshülsen zur Verwendung in Verbin¬dungselementen nach EN 3155 002 and EN 4530 002 anwendbar sind.

Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion - Partie 006 : Manchons d'étanchéité pour câble de diamètre extérieur 4,68 mm à 5,05 mm - Norme de produit

Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 006. del: Tesnilne puše za kable z zunanjim premerom od 4,68 mm do 5,05 mm - Standard za proizvod

General Information

Status
Published
Publication Date
19-Dec-2006
Withdrawal Date
29-Jun-2007
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
01-Jun-2017

Buy Standard

Standard
EN 4530-006:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 006. del: Tesnilne puše za kable z zunanjim premerom od 4,68 mm do 5,05 mm - Standard za proizvodLuft- und Raumfahrt - Dichtungshülsen zur Verwendung in Verbindungselementen - Teil 006: Dichtungshülsen für Leitungen mit einem Außendurchmesser von 4,68 mm bis 5,05 mm - ProduktnormSérie aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion - Partie 006 : Manchons d'étanchéité pour câble de diamètre extérieur 4,68 mm à 5,05 mm - Norme de produitAerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4530-006:2006SIST EN 4530-006:2009en,de01-september-2009SIST EN 4530-006:2009SLOVENSKI
STANDARD



SIST EN 4530-006:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4530-006December 2006ICS 49.060 English VersionAerospace series - Sealing sleeves used in elements ofconnection - Part 006: Sealing sleeves for external diametercable 4,68 mm to 5,05 mm - Product standardSérie aérospatiale - Manchons d'étanchéité utilisés dansles organes de connexion - Partie 006 : Manchonsd'étanchéité pour câble de diamètre extérieur 4,68 mm à5,05 mm - Norme de produitLuft- und Raumfahrt - Dichtungshülse zur Verwendung inVerbindungselementen - Teil 006: Dichtungshülse fürLeitungen mit einem Aussendurchmesser von 4,68 mm bis5,05 mm - ProduktnormThis European Standard was approved by CEN on 24 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4530-006:2006: ESIST EN 4530-006:2009



EN 4530-006:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 5 Designation.7 6 Marking.7 7 Delivery conditions.7 8 Technical specification.7
SIST EN 4530-006:2009



EN 4530-006:2006 (E) 3 Foreword This document (EN 4530-006:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.