EN ISO 16474-2:2013/FprA1

Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO/16474-2:2013/FDAM 1:2022)

Beschichtungsstoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 2: Xenonbogenlampen - Änderung 1: Klassifizierung von Tageslichtfiltern (ISO/16474-2:2013/FDAM 1:2022)

No scope available

Peintures et vernis —- Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 2: Lampes à arc au xénon - Amendement 1: Classification des filtres de la lumière du jour (ISO/16474-2:2013/FDAM 1:2022)

Barve in laki - Metode izpostavljanja laboratorijskim virom svetlobe - 2. del: Ksenonske obločne svetilke - Dopolnilo A1: Klasifikacija filtrov dnevne svetlobe (ISO/16474-2:2013/FDAM 1:2022)

General Information

• Status: Not Published
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Ref Project: SIST EN ISO 16474-2:2014/kprA1:2022 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO/16474-2:2013/FDAM 1:2022)

RELATIONS

• Amends: EN ISO 16474-2:2013 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)
• Effective Date: 28-Apr-2021

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 16474-2:2014/oprA1:2021
01-december-2021
Barve in laki - Metode izpostavljanja laboratorijskim virom svetlobe - 2. del:
Ksenonske obločne svetilke - Dopolnilo A1: Klasifikacija filtrov dnevne svetlobe
(ISO/16474-2:2013/DAM 1:2021)

Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-

arc lamps - Amendment 1: Classification of daylight filters (ISO/16474-2:2013/DAM

1:2021)
Beschichtungsstoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 2:
Xenonbogenlampen - Änderung 1: Klassifizierung von Tageslichtfiltern (ISO 16474-
2:2013/DAM 1:2021)

Peintures et vernis Méthodes d'exposition à des sources lumineuses de laboratoire -

Partie 2: Lampes à arc au xénon - Amendement 1: Classification des filtres de la lumière

du jour (ISO/16474-2:2013/DAM 1:2021)
Ta slovenski standard je istoveten z: EN ISO 16474-2:2013/prA1
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 16474-2:2014/oprA1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16474-2:2014/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 16474-2:2014/oprA1:2021
DRAFT AMENDMENT
ISO 16474-2:2013/DAM 1
ISO/TC 35/SC 9  Secretariat: BSI
Voting begins on:  Voting terminates on:
2021-10-25 2022-01-17
Paints and varnishes — Methods of exposure to laboratory
light sources —
Part 2:
Xenon-arc lamps
AMENDMENT 1: Classification of daylight filters

Peintures et vernis — Méthodes d'exposition à des sources lumineuses de laboratoire —

Partie 2: Lampes à arc au xénon
AMENDEMENT 1
ICS: 87.040
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 16474-2:2013/DAM 1:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 3 ----------------------
SIST EN ISO 16474-2:2014/oprA1:2021
ISO 16474-2:2013/DAM 1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 16474-2:2014/oprA1:2021
ISO 16474-2:2013/DAM 1:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

Amendment 1 to ISO 16474-2:2013 was prepared by Technical Committee ISO/TC 35,  Paints and

varnishes, Subcommittee SC 9, General test methods for paints and varnishes.

Amendment 1 adds a new informative Annex C on Classification of daylight filters.

A list of all parts in the ISO 16474 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be
...