EN ISO 19403-4:2020

Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)

ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-4:2017 assumes that the information of surface tension of the liquid to be tested, as well as at least one suitable reference liquid, is known.
[1] This term is defined in DIN 1342-1.

Beschichtungsstoffe - Benetzbarkeit - Teil 4: Bestimmung des polaren und dispersen Anteils der Oberflächenspannung von Flüssigkeiten aus einer Grenzflächenspannung (ISO 19403-4:2017)

Peintures et vernis - Mouillabilité - Partie 4: Détermination des fractions polaires et disperses de la tension de surface des liquides à partir de la tension interfaciable (ISO 19403-4:2017)

Le présent document spécifie une méthode d'essai permettant de déterminer les fractions polaire et dispersive de la tension superficielle des liquides à l'aide de méthodes optiques. Cette méthode peut être utilisée pour la caractérisation des produits de peinture liquides, en particulier lorsque des effets de séchage se produisent durant le mesurage. Son applicabilité peut être limitée pour les produits liquides de rhéologie non newtonienne[1].
Le présent document présuppose que les informations relatives à la tension superficielle du liquide à soumettre à essai, ainsi que d'au moins un liquide de référence approprié, sont connues.
[1] Ce terme est défini dans la norme DIN 1342-1.

Barve in laki - Omočljivost - 4. del: Določevanje polarnega in disperznega dela površinske napetosti tekočin prek medfazne napetosti (ISO 19403-4:2017)

General Information

• Status: Published
• Publication Date: 11-Feb-2020
• Withdrawal Date: 30-Aug-2020
• ICS: 01.040.87 - Paint and colour industries (Vocabularies)
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 12-Feb-2020
• Due Date: 13-Feb-2021
• Completion Date: 12-Feb-2020
• Ref Project: SIST EN ISO 19403-4:2020 - Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)

Relations

• Revised: prEN ISO 19403-4 - Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO/DIS 19403-4:2023)
• Effective Date: 21-Jun-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19403-4:2020
01-april-2020
Barve in laki - Omočljivost - 4. del: Določevanje polarnega in disperznega dela
površinske napetosti tekočin prek medfazne napetosti (ISO 19403-4:2017)
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive
fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017)
Beschichtungsstoffe - Benetzbarkeit - Teil 4: Bestimmung des polaren und dispersen
Anteils der Oberflächenspannung von Flüssigkeiten aus einer Grenzflchenspannung
(ISO 19403-4:2017)
Peintures et vernis - Mouillabilité - Partie 4: Détermination des fractions polaires et
disperses de la tension de surface des liquides à partir de la tension interfaciable (ISO
19403-4:2017)
Ta slovenski standard je istoveten z: EN ISO 19403-4:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 19403-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19403-4:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19403-4:2020


EN ISO 19403-4
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 01.040.87
English Version

Paints and varnishes - Wettability - Part 4: Determination
of the polar and dispersive fractions of the surface tension
of liquids from an interfacial tension (ISO 19403-4:2017)
Peintures et vernis - Mouillabilité - Partie 4: Beschichtungsstoffe - Benetzbarkeit - Teil 4:
Détermination des fractions polaires et disperses de la Bestimmung des polaren und dispersen Anteils der
tension de surface des liquides à partir de la tension Oberflächenspannung von Flüssigkeiten aus einer
interfaciable (ISO 19403-4:2017) Grenzflächenspannung (ISO 19403-4:2017)
This European Standard was approved by CEN on 4 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19403-4:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19403-4:2020
EN ISO 19403-4:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19403-4:2020
EN ISO 19403-4:2020 (E)
European foreword
The text of ISO 19403-4:2017 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 19403-4:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia
...