EN ISO 19403-6:2020
(Main)Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO 19403-6:2017)
Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO 19403-6:2017)
ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined.
By means of this defined measurement, the wetting and dewetting properties can be characterized. It can also be concluded on the morphological and chemical homogeneity of interfaces.
Beschichtungsstoffe - Benetzbarkeit - Teil 6: Messung des dynamischen Kontaktwinkels (ISO 19403-6:2017)
Peintures et vernis - Mouillabilité - Partie 6: Mesurage de l'angle de contact dynamique (ISO 19403-6:2017)
Le présent document spécifie une méthode permettant de mesurer l'angle de contact dynamique à l'aide d'une méthode optique. Les angles d'avancée et de recul sont déterminés.
Grâce à cette mesure définie, les propriétés de mouillage et de démouillage peuvent être caractérisées. Il est également possible de tirer des conclusions quant à l'homogénéité morphologique et chimique des interfaces.
Barve in laki - Omočljivost - 6. del: Merjenje dinamičnega stičnega kota (ISO 19403-6:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19403-6:2020
01-april-2020
Barve in laki - Omočljivost - 6. del: Merjenje dinamičnega stičnega kota (ISO 19403
-6:2017)
Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO
19403-6:2017)
Beschichtungsstoffe - Benetzbarkeit - Teil 6: Messung des dynamischen Kontaktwinkels
(ISO 19403-6:2017)
Peintures et vernis - Mouillabilité - Partie 6: Mesurage de l'angle de contact dynamique
(ISO 19403-6:2017)
Ta slovenski standard je istoveten z: EN ISO 19403-6:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 19403-6:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19403-6:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 19403-6:2020
EN ISO 19403-6
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 01.040.87
English Version
Paints and varnishes - Wettability - Part 6: Measurement
of dynamic contact angle (ISO 19403-6:2017)
Peintures et vernis - Mouillabilité - Partie 6: Mesurage Beschichtungsstoffe - Benetzbarkeit - Teil 6: Messung
de l'angle de contact dynamique (ISO 19403-6:2017) des dynamischen Kontaktwinkels (ISO 19403-6:2017)
This European Standard was approved by CEN on 4 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19403-6:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19403-6:2020
EN ISO 19403-6:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19403-6:2020
EN ISO 19403-6:2020 (E)
European foreword
The text of ISO 19403-6:2017 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 19403-6:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19403-6:2017 has been approved by CEN as EN ISO 19403-6:2020 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 19403-6:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 19403-6:2020
INTERNATIONAL ISO
STANDARD 19403-6
First edition
2017-06
Paints and varnishes — Wettability —
Part 6:
Measurement of dynamic contact angle
Peintures et vernis — Mouillabilité —
Partie 6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.