This document defines terms for electro-deposition coatings.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The ISO 19403 series specifies optical test methods
- for the measurement of the contact angle,
- for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,
- for the determination of the surface tension of liquids, including the polar and dispersive fractions, and
- for the checking of the measurement arrangement with reference materials.
It can be applied for the characterization of substrates, coatings and coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-1:2017 specifies terms and definitions and defines the general principles.
[1] This term is defined in DIN 1342-1.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The ISO 19403 series specifies optical test methods
- for the measurement of the contact angle,
- for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,
- for the determination of the surface tension of liquids, including the polar and dispersive fractions, and
- for the checking of the measurement arrangement with reference materials.
It can be applied for the characterization of substrates, coatings and coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-1:2017 specifies terms and definitions and defines the general principles.
[1] This term is defined in DIN 1342-1.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-2:2017 specifies a test method to measure the contact angle for the determination of the surface free energy of a solid surface. The method can be applied for the characterization of substrates and coatings.
NOTE 1 For the determination of the surface free energy of polymers and coatings, either the method in accordance with Owens, Wendt, Rabel and Kaelble or the method in accordance with Wu is used preferably.
NOTE 2 The morphological and chemical homogeneity have an influence on the measuring results.
NOTE 3 The procedures indicated in ISO 19403-2:2017 are based on the state-of-the-art employing the drop projection method in penumbral shadow. Other methods are not excluded.
NOTE 4 Measuring the contact angle on powders is not part of ISO 19403-2:2017. For further information, see the bibliography.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined.
By means of this defined measurement, the wetting and dewetting properties can be characterized. It can also be concluded on the morphological and chemical homogeneity of interfaces.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-7:2017 specifies a method for the dynamic measurement of the roll-off angle of a liquid drop on a solid surface. From the dynamic measurement, the advancing and receding angles of the drop rolling off can also be determined. The roll-off angle plays a role when evaluating, for example, easy-to-clean or anti-adherent surfaces.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-5:2017 assumes that the information of surface tension of the liquid to be tested and the surface free energy of the dispersive reference solids is known.
[1] This term is defined in DIN 1342-1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-3:2017 specifies a test method to measure the surface tension of liquids with an optical method using the pendant drop. The method can be applied for the characterization of liquid coating materials. The applicability can be restricted for liquids with non-Newtonian rheology[1].
NOTE For other methods to determine the surface tension, see e.g. EN 14370 and ISO 1409.
[1] This term is defined in DIN 1342-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-4:2017 assumes that the information of surface tension of the liquid to be tested, as well as at least one suitable reference liquid, is known.
[1] This term is defined in DIN 1342-1.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines terms for electro-deposition coatings. It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This document defines terms that are used in the field of pigments, dyestuffs and extenders.
For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are
given, relating to their use in coating materials.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines special terms used in the field of coating powders.
Other terms and definitions related to paints and varnishes are given in ISO 4618.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines terms that are used in the field of pigments, dyestuffs and extenders.
For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines special terms used in the field of coating powders.
Other terms and definitions related to paints and varnishes are given in ISO 4618.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines terms that are used in the field of pigments, dyestuffs and extenders. For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off

This document defines special terms used in the field of coating powders. Other terms and definitions related to paints and varnishes are given in ISO 4618.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

This document applies to the industry producing colouring materials and the consumer who uses the
products of this industry. In this document, the colouring materials are classified in accordance with
colouristic and chemical aspects.
Some dyestuffs for use in the ceramics and food industries are listed as examples.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 19403-7:2017 specifies a method for the dynamic measurement of the roll-off angle of a liquid drop on a solid surface. From the dynamic measurement, the advancing and receding angles of the drop rolling off can also be determined. The roll-off angle plays a role when evaluating, for example, easy-to-clean or anti-adherent surfaces.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials. The applicability can be restricted for liquids with non-Newtonian rheology[1]. ISO 19403-5:2017 assumes that the information of surface tension of the liquid to be tested and the surface free energy of the dispersive reference solids is known. [1] This term is defined in DIN 1342-1.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined. By means of this defined measurement, the wetting and dewetting properties can be characterized. It can also be concluded on the morphological and chemical homogeneity of interfaces.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicability can be restricted for liquids with non-Newtonian rheology[1]. ISO 19403-4:2017 assumes that the information of surface tension of the liquid to be tested, as well as at least one suitable reference liquid, is known. [1] This term is defined in DIN 1342-1.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

ISO 19403-2:2017 specifies a test method to measure the contact angle for the determination of the surface free energy of a solid surface. The method can be applied for the characterization of substrates and coatings. NOTE 1 For the determination of the surface free energy of polymers and coatings, either the method in accordance with Owens, Wendt, Rabel and Kaelble or the method in accordance with Wu is used preferably. NOTE 2 The morphological and chemical homogeneity have an influence on the measuring results. NOTE 3 The procedures indicated in ISO 19403-2:2017 are based on the state-of-the-art employing the drop projection method in penumbral shadow. Other methods are not excluded. NOTE 4 Measuring the contact angle on powders is not part of ISO 19403-2:2017. For further information, see the bibliography.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

ISO 19403-3:2017 specifies a test method to measure the surface tension of liquids with an optical method using the pendant drop. The method can be applied for the characterization of liquid coating materials. The applicability can be restricted for liquids with non-Newtonian rheology[1]. NOTE For other methods to determine the surface tension, see e.g. EN 14370 and ISO 1409. [1] This term is defined in DIN 1342-1.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

The ISO 19403 series specifies optical test methods - for the measurement of the contact angle, - for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions, - for the determination of the surface tension of liquids, including the polar and dispersive fractions, and - for the checking of the measurement arrangement with reference materials. It can be applied for the characterization of substrates, coatings and coating materials. The applicability can be restricted for liquids with non-Newtonian rheology[1]. ISO 19403-1:2017 specifies terms and definitions and defines the general principles. [1] This term is defined in DIN 1342-1.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This International Standard defines terms used in the field of coating materials (paints, varnishes and
raw materials for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those
applications and properties, e.g. corrosion protection, coating powders.
Terms on nanotechnologies are harmonized with ISO/TS 80004-4.
In addition to terms in English and French (two of the three official ISO languages), this International
Standard gives the equivalent terms in German; these are published under the responsibility of the
member body for Germany (DIN). However, only the terms and definitions given in the official languages
can be considered as ISO terms and definitions.
NOTE 1 Those terms that are defined elsewhere in this International Standard are shown in italics.
NOTE 2 See also the ISO online browsing platform (OBP): https://www.iso.org/obp/ui/

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4618:2014 defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes). Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.
Terms and definitions from ISO 4618:2014 can be viewed free of charge on the ISO online browsing platform (OBP): https://www.iso.org/obp/ui/

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document defines terms for electro-deposition coatings.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 18451-1:2015 defines terms that are used in the field of pigments, dyestuffs and extenders.
For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.
In addition to terms in English and French (two of the three official ISO languages), this part of ISO 18451 gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
NOTE Those terms that are defined elsewhere in this part of ISO 18451 are shown in italics.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 8130-14:2004 defines special terms used in the field of coating powders.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 18451-1:2015 defines terms that are used in the field of pigments, dyestuffs and extenders.
For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.
In addition to terms in English and French (two of the three official ISO languages), this part of ISO 18451 gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
NOTE Those terms that are defined elsewhere in this part of ISO 18451 are shown in italics.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 8130-14:2004 defines special terms used in the field of coating powders.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 18451-1:2015 defines terms that are used in the field of pigments, dyestuffs and extenders. For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials. In addition to terms in English and French (two of the three official ISO languages), this part of ISO 18451 gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions. NOTE Those terms that are defined elsewhere in this part of ISO 18451 are shown in italics.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off

This International Standard defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes). Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders. In addition to terms in English and French (two of the three official ISO languages), this International Standard gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.

  • Standard
    75 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

ISO 4618:2006 is a trilingual vocabulary which defines English, French and German terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes).
Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders.

  • Standard
    75 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day

2006 10 25  Withdrawn at ISO. CEN/TC 139 resolution 12/2005.
Migrated from Progress Sheet (TC Comment) (2000-07-10): SPPJ_50_Y_199906

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN ISO 4618 defines special terms relating to paint characteristics and properties used in the field of coating materials (paints, varnishes and similar products).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN ISO 4618 defines special terms relating to surface preparation and methods of application used in the field of coating materials (paints, varnishes and similar products).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2006 10 25  Withdrawn at ISO. CEN/TC 139 resolution 12/2005.
Migrated from Progress Sheet (TC Comment) (2000-07-10): SPPJ_50_Y_199906

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN ISO 4618 defines special terms relating to surface preparation and methods of application used in the field of coating materials (paints, varnishes and similar products).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of EN ISO 4618 defines special terms relating to paint characteristics and properties used in the field of coating materials (paints, varnishes and similar products).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day