EN ISO 19396-1:2020
(Main)Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass membrane (ISO 19396-1:2017)
Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass membrane (ISO 19396-1:2017)
ISO 19396-1:2017 specifies a method for laboratory measurement of the pH value of polymer dispersions and coating materials using pH electrodes with a glass membrane. ISO 19396‑2 specifies a method for measuring the pH value using pH electrodes with ion-sensitive field-effect transistor (ISFET) technology.
Beschichtungsstoffe - Bestimmung des pH-Wertes - Teil 1: pH-Elektroden mit Glasmembran (ISO 19396-1:2017)
Dieses Dokument legt ein Verfahren zum Messen des pH Wertes von Polymerdispersionen und Beschichtungsstoffen mit pH Elektroden mit Glasmembran im Labor fest. ISO 19396 2 legt ein Verfahren zum Messen des pH Wertes mit pH Elektroden mit ISFET-Technologie (Ionensensitiver Feldeffekt-Transistor) fest.
Peintures et vernis - Détermination de la valeur pH - Partie 1: Électrodes pH avec membrane de verre (ISO 19396-1:2017)
Le présent document spécifie une méthode de mesure en laboratoire de la valeur de pH des dispersions de polymères et des produits de peinture à l'aide d'électrodes de pH pourvues d'une membrane en verre. L'ISO 19396-2 spécifie une méthode de mesure de la valeur de pH à l'aide d'électrodes de pH dotées de la technologie de transistor à effet de champ sensible aux ions (ISFET).
Barve in laki - Določevanje pH-vrednosti - 1. del: pH-elektrode s stekleno membrano (ISO 19396-1:2017)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19396-1:2020
01-april-2020
Barve in laki - Določevanje pH-vrednosti - 1. del: pH-elektrode s stekleno
membrano (ISO 19396-1:2017)
Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass
membrane (ISO 19396-1:2017)
Beschichtungsstoffe - Bestimmung des pH-Wertes - Teil 1: pH-Elektroden mit
Glasmembran (ISO 19396-1:2017)
Peintures et vernis - Détermination de la valeur pH - Partie 1: Électrodes pH avec
membrane de verre (ISO 19396-1:2017)
Ta slovenski standard je istoveten z: EN ISO 19396-1:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 19396-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19396-1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 19396-1:2020
EN ISO 19396-1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 87.040
English Version
Paints and varnishes - Determination of pH value - Part 1:
pH electrodes with glass membrane (ISO 19396-1:2017)
Peintures et vernis - Détermination de la valeur pH - Beschichtungsstoffe - Bestimmung des pH-Wertes -
Partie 1: Électrodes pH avec membrane de verre (ISO Teil 1: pH-Elektroden mit Glasmembran (ISO 19396-
19396-1:2017) 1:2017)
This European Standard was approved by CEN on 4 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19396-1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19396-1:2020
EN ISO 19396-1:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19396-1:2020
EN ISO 19396-1:2020 (E)
European foreword
The text of ISO 19396-1:2017 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 19396-1:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19396-1:2017 has been approved by CEN as EN ISO 19396-1:2020 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 19396-1:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 19396-1:2020
INTERNATIONAL ISO
STANDARD 19396-1
First edition
2017-08
Paints and varnishes — Determination
of pH value —
Part 1:
pH elect
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.