EN ISO 9312:1994
(Main)Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990)
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990)
Widerstandsschweißeinrichtungen - Isolierende Zylinderstifte für Unterkupfer (ISO 9312:1990)
Diese Internationale Norm gilt für isolierende Stifte zum Verstiften von Teilen im Sekundärkreis in Widerstandsschweisseinrichtungen oder anderen stromführenden Einrichtungen, die gegeneinander isoliert aufgebaut werden müssen.
Equipement de soudage par résistance - Fiches isolées utilisées dans les contre-électrodes (ISO 9312:1990)
La présente Norme internationale s'applique aux fiches isolées utilisées pour les éléments de fixation dans le circuit secondaire des équipements pour soudage par résistance ou autres éléments sous tension devant être isolés les uns des autres.
Oprema za elektrouporovno varjenje – Izolirani cilindrični zatiči za podlage (ISO 9312:1990)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9312:1999
01-december-1999
2SUHPD]DHOHNWURXSRURYQRYDUMHQMH±,]ROLUDQLFLOLQGULþQL]DWLþL]DSRGODJH ,62
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO
9312:1990)
Widerstandsschweißeinrichtungen - Isolierende Zylinderstifte für Unterkupfer (ISO
9312:1990)
Equipement de soudage par résistance - Fiches isolées utilisées dans les contre-
électrodes (ISO 9312:1990)
Ta slovenski standard je istoveten z: EN ISO 9312:1994
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 9312:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9312:1999
---------------------- Page: 2 ----------------------
SIST EN ISO 9312:1999
---------------------- Page: 3 ----------------------
SIST EN ISO 9312:1999
---------------------- Page: 4 ----------------------
SIST EN ISO 9312:1999
---------------------- Page: 5 ----------------------
SIST EN ISO 9312:1999
---------------------- Page: 6 ----------------------
SIST EN ISO 9312:1999
INTERNATIONAL
IS0
STANDARD 9312
First edition
1990-07- 15
Resistance welding equipment - Insulated pins
for use in electrode back-ups
gquipement de soudage par rhistance -
Fiches isol6es utilis6es dans les con tre-
6lec trodes
Reference number
IS0 9312 : 1990 (E)
---------------------- Page: 7 ----------------------
SIST EN ISO 9312:1999
IS0 9312 : 1990 (E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission UEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for voting. Publication as an International Standard requires
approval by at least 75 % of the member bodies casting a vote.
International Standard IS0 9312 was prepared by Technical Committee lSO/TC 44,
Welding and allied processes.
0 IS0 1990
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in
writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Swit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.