EN 4691-2:2018

Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit

This European Standard presents the construction kit of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature range −55 °C to 85 °C.

Luft- und Raumfahrt - Zug-Druck-Stange mit integrierten Bolzen - Teil 2: Baukastenübersicht

Série aérospatiale - Bielle avec axes intégrés - Partie 2: Vue d'ensemble

La présente Norme européenne présente la construction modulaire des assemblages de bielles avec axes intégrés, équipés de deux embouts réglables, à l’intérieur de la structure et de la sous-structure, dans une gamme de températures de  55 °C à 85 °C, pour les applications aérospatiales.

Aeronavtika - Zglobna ročica z vgrajenim sornikom - 2. del: Komplet za pregledovanje konstrukcije

General Information

• Status: Published
• Publication Date: 09-Jan-2018
• Withdrawal Date: 30-Jul-2018
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jan-2018
• Completion Date: 10-Jan-2018
• Ref Project: SIST EN 4691-2:2018 - Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2018
$HURQDYWLND=JOREQDURþLFD]YJUDMHQLPVRUQLNRPGHO.RPSOHW]D
SUHJOHGRYDQMHNRQVWUXNFLMH
Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit
Luft- und Raumfahrt - Zug-Druck Stange mit integrierten Bolzen - Teil 2:
Baukastenübersicht
Série aérospatiale - Bielle avec axes intégrés - Partie 2: Vue d'ensemble
Ta slovenski standard je istoveten z: EN 4691-2:2018
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4691-2
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2018
EUROPÄISCHE NORM
ICS 49.035
English Version
Aerospace series - Tie rod with integrated bolts - Part 2:
Overview construction kit
Série aérospatiale - Bielle avec axes intégrés - Partie 2: Luft- und Raumfahrt - Zug-Druck Stange mit
Vue d'ensemble integrierten Bolzen - Teil 2: Baukastenübersicht
This European Standard was approved by CEN on 25 June 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4691-2:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction. 4
1 Scope . 5
2 Normative references . 5
3 EN 4693: Assembly code A, B and C . 5
4 EN 4694: Assembly code D, E and F . 7
5 EN 4695: Assembly code G, H and K . 8
6 EN 4692: Locking clips . 9
Annex A (informative) Standard evolution form . 12

European foreword
This document (EN 4691-2:2018) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2018 and conflicting national standards shall be withdrawn at
the latest by July 2018.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Serbia, Slovakia, Sloven
...