SIST EN 4056-005:2023
(Main)Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
This document specifies the required characteristics of cable ties with a metallic locking device manufactured from plastics material, for installation under controlled tension on aircraft cable harnesses.
It is used together with EN 4056-001.
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 005: Befestigungsbänder aus Kunststoff mit Verriegelungssystemen aus Metall, Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 005 : Frettes en plastique avec languette métallique, températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produit
Le présent document spécifie les caractéristiques des frettes de câblage fabriquées à partir de matériau plastique, avec une languette métallique, pour installation sous tension contrôlée sur les harnais de câbles dans les aéronefs.
Il est utilisé conjointement avec l’EN 4056-001 :2015.
Aeronavtika - Kabelske spojke za vezalno pasovje - 005. del: Plastične vezice s kovinskimi zapornimi napravami, s stalno delovno temperaturo od –65 °C do 105 °C in od –65 °C do 150 °C - Standard za proizvod
Ta dokument opredeljuje zahtevane lastnosti kabelskih spojk s kovinsko napravo za zaklepanje, proizvedenih iz plastike, za vgradnjo med nadzorovano napetostjo v letalsko vezalno pasovje.
Uporablja se skupaj s standardom EN 4056-001.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4056-005:2023
01-april-2023
Aeronavtika - Kabelske spojke za vezalno pasovje - 005. del: Plastične vezice s
kovinskimi zapornimi napravami, s stalno delovno temperaturo od –65 °C do 105
°C in od –65 °C do 150 °C - Standard za proizvod
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic
locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C -
Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 005:
Befestigungsbänder aus Kunststoff mit Verriegelungssystemen aus Metall,
Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 005 : Frettes en plastique
avec languette métallique, températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C -
Norme de produit
Ta slovenski standard je istoveten z: EN 4056-005:2023
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 4056-005:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4056-005:2023
---------------------- Page: 2 ----------------------
SIST EN 4056-005:2023
EN 4056-005
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2023
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Part 005:
Plastic cable ties with metallic locking devices, operating
temperatures -65 °C to 105 °C and -65 °C to 150 °C -
Product standard
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Partie 005 : Frettes en plastique avec languette Leitungsbündel - Teil 005: Befestigungsbänder aus
métallique, températures d'utilisation -65 °C à 105 °C Kunststoff mit Verriegelungssystemen aus Metall,
et -65 °C à 150 °C - Norme de produit Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis
150 °C - Produktnorm
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4056-005:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4056-005:2023
EN 4056-005:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Dimensions. 4
4.2 Material . 6
4.2.1 Temperature rating (type) . 6
4.2.2 Flammability class . 6
4.2.3 Colour . 6
4.2.4 Smoke density and toxicity . 6
4.3 UV-resistant cable ties . 6
4.4 Application tool . 7
5 Tests and requirements . 7
6 Quality assurance . 9
7 Designation . 9
8 Marking . 9
9 Packaging and storage . 9
2
---------------------- Page: 4 ----------------------
SIST EN 4056-005:2023
EN 4056-005:2023 (E)
European foreword
This document (EN 4056-005:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2023, and conflicting national standards shall be
withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania
...
SLOVENSKI STANDARD
oSIST prEN 4056-005:2021
01-junij-2021
Aeronavtika - Kabelske spojke za vezalno pasovje - 005. del: Plastične vezice s
kovinskimi zapornimi napravami, s stalno delovno temperaturo od –65 °C do 105
°C in –65 °C do 150 °C - Standard za proizvod
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic
locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C -
Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 005:
Befestigungsbänder aus Kunstoff mit Metallzunge, betriebstemperatur –65 °C à 105 °C
bis –65 °C à 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 005 : Frettes en plastique
avec languette métallique, températures d’utilisation –65 °C à 105 °C et 65 °C à 105 °C
- Norme de produit
Ta slovenski standard je istoveten z: prEN 4056-005
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4056-005:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4056-005:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4056-005:2021
DRAFT
EUROPEAN STANDARD
prEN 4056-005
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Part 005:
Plastic cable ties with metallic locking devices, operating
temperatures -65 °C to 105 °C and -65 °C to 150 °C -
Product standard
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Partie 005 : Frettes en plastique avec languette Leitungsbündel - Teil 005: Befestigungsbänder aus
métallique, températures d'utilisation -65 °C à 105 °C Kunstoff mit Metallzunge, betriebstemperatur -65 °C à
et 65 °C à 105 °C - Norme de produit 105 °C bis -65 °C à 150 °C - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4056-005:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4056-005:2021
prEN 4056-005:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Dimensions. 4
4.2 Material . 6
4.2.1 Temperature rating (type) . 6
4.2.2 Flammability class . 6
4.2.3 Colour . 6
4.2.4 Smoke density and toxicity . 6
4.3 UV-resistant cable ties . 6
4.4 Application tool . 6
5 Tests and requirements . 7
6 Quality assurance . 9
7 Designation . 9
8 Marking . 9
9 Packaging and storage . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 4056-005:2021
prEN 4056-005:2021 (E)
European foreword
This document (prEN 4056-005:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the Enquiry.
3
---------------------- Page: 5 ----------------------
oSIST prEN 4056-005:2021
prEN 4056-005:2021 (E)
1 Scope
This document defines the required characteristics of cable ties with a metallic locking
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.