EN 3479:2022
(Main)Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa
Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa
This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted
Solution treated and precipitation treated
Plates
6 mm < a ≤ 20 mm
1 070 MPa ≤ Rm ≤ 1 220 MPa
for aerospace applications.
Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Platten - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa
Dieses Dokument legt die Anforderungen an:
Stahl X5CrNiCu15 5 (1.4545)
Mit selbstverzehrender Elektrode umgeschmolzen
Lösungsgeglüht und ausscheidungsgehärtet
Platten
6 mm < a ≤ 20 mm
1 070 MPa ≤ Rm ≤ 1 220 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable - Mis en solution et précipité - Plaques - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa
Le présent document spécifie les exigences relatives à :
Acier X5CrNiCu15-5 (1.4545)
Refondu à l'électrode consommable
Mis en solution et précipité
Plaques
6 mm < a ≤ 20 mm
1 070 MPa ≤ Rm ≤ 1 220 MPa
pour les applications aérospatiales.
Aeronavtika - Jeklo X5CrNiCu15-5 (1.4545) - Pretaljeno s taljivo elektrodo - Topilno žarjeno in izločevalno utrjeno - Plošče - 6 mm < a ≤ 20 mm - 1070 MPa ≤ Rm ≤ 1220 MPa
Ta dokument določa zahteve, ki se navezujejo na:
jeklo X5CrNiCu15-5 (1.4545),
pretaljeno s taljivo elektrodo,
topilno žarjeno in izločevalno utrjeno,
plošče,
6 mm < a ≤ 20 mm,
1070 MPa ≤ Rm ≤ 1220 MPa,
za uporabo v aeronavtiki.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3479:2023
01-marec-2023
Nadomešča:
SIST EN 3479:2009
Aeronavtika - Jeklo X5CrNiCu15-5 (1.4545) - Pretaljeno s taljivo elektrodo - Topilno
žarjeno in izločevalno utrjeno - Plošče - 6 mm < a ≤ 20 mm - 1070 MPa ≤ Rm ≤ 1220
MPa
Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted -
Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm
≤ 1 220 MPa
Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Platten - 6 mm < a ≤ 20
mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable
- Mis en solution et précipité - Plaques - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220
MPa
Ta slovenski standard je istoveten z: EN 3479:2022
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
SIST EN 3479:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3479:2023
---------------------- Page: 2 ----------------------
SIST EN 3479:2023
EN 3479
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 3479:2007
English Version
Aerospace series - Steel X5CrNiCu15-5 (1.4545) -
Consumable electrode remelted - Solution treated and
precipitation treated - Plates - 6 mm < a 20 mm - 1 070
MPa Rm 1 220 MPa
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) -
Refondu à l'électrode consommable - Mis en solution et Mit selbstverzehrender Elektrode umgeschmolzen -
précipité - Plaques - 6 mm < a 20 mm - 1 070 MPa Lösungsgeglüht und ausscheidungsgehärtet - Platten -
6 mm < a 20 mm - 1 070 MPa Rm 1 220 MPa
Rm 1 220 MPa
This European Standard was approved by CEN on 29 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3479:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3479:2023
EN 3479:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 3479:2023
EN 3479:2022 (E)
European foreword
This document (EN 3479:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardiz
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.