EN ISO 11844-2:2008

Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005)

ISO 11844-2:2005 specifies methods for determination of corrosion rate with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation of corrosivity, different sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc and steel. The values obtained from the measurements are used as classification criteria for the determination of indoor atmospheric corrosivity.

Korrosion von Metallen und Legierungen - Einteilung der Korrosivität in Räumen mit geringer Korrosivität - Teil 2: Bestimmung der korrosiven Belastung in Räumen (ISO 11844-2:2005)

Dieser Teil von ISO 11844 legt Verfahren zur Bestimmung der Korrosionsgeschwindigkeit an Metall-Standardproben
in Innenräumen mit geringer Korrosivität fest. Für diese direkte Bewertung der Korrosivität können
Methoden mit unterschiedlicher Empfindlichkeit angewendet werden, indem metallische Standardproben aus
Kupfer, Silber, Zink und Stahl untersucht werden. Die bei den Messungen bestimmten Werte werden als
Einteilungskriterien zur Bestimmung der atmosphärischen Korrosivität in Innenräumen angewendet.

Corrosion des métaux et alliages - Classification de la corrosivité faible des atmosphères d'intérieur - Partie 2: Détermination de l'attaque par corrosion dans les atmosphères d'intérieur (ISO 11844-2:2005)

L'ISO 11844-2:2005 spécifie des méthodes de détermination de la vitesse de corrosion d'éprouvettes normalisées de métaux dans des atmosphères d'intérieur à faible corrosivité. Pour cette évaluation directe de la corrosivité, différentes méthodes sensibles peuvent être appliquées à des éprouvettes normalisées des métaux suivants: cuivre, argent, zinc et acier. Les valeurs obtenues par mesurage servent de critères de classification pour la détermination de la corrosivité des atmosphères d'intérieur.

Klasifikacija nizke korozivnosti notranjih atmosfer - 2. del: Ugotavljanje napada korozije v notranjih atmosferah (ISO 11844-2:2005)

General Information

• Status: Withdrawn
• Publication Date: 22-Apr-2008
• Withdrawal Date: 09-Jun-2020
• ICS: 77.060 - Corrosion of metals
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Jun-2020
• Ref Project: SIST EN ISO 11844-2:2008 - Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005)

Relations

• Replaced By: EN ISO 11844-2:2020 - Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)
• Effective Date: 17-Jun-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11844-2:2008
01-julij-2008
Klasifikacija nizke korozivnosti notranjih atmosfer - 2. del: Ugotavljanje napada
korozije v notranjih atmosferah (ISO 11844-2:2005)
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres -
Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005)
Corrosion des métaux et alliages - Classification de la corrosivité faible des atmospheres
d'intérieur - Partie 2: Détermination de l'attaque par corrosion dans les atmospheres
d'intérieur (ISO 11844-2:2005)
Ta slovenski standard je istoveten z: EN ISO 11844-2:2008
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 11844-2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 11844-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 77.060

English Version
Corrosion of metals and alloys - Classification of low corrosivity
of indoor atmospheres - Part 2: Determination of corrosion
attack in indoor atmospheres (ISO 11844-2:2005)
Corrosion des métaux et alliages - Classification de la Korrosion von Metallen und Legierungen - Einteilung der
corrosivité faible des atmosphères d'intérieur - Partie 2: Korrosivität in Räumen mit geringer Korrosivität - Teil 2:
Détermination de l'attaque par corrosion dans les Bestimmung der korrosiven Belastung in Räumen (ISO
atmosphères d'intérieur (ISO 11844-2:2005) 11844-2:2005)
This European Standard was approved by CEN on 21 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11844-2:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 11844-2:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 11844-2:2008 (E)
Foreword
The text of ISO 11844-2:2005 has been prepared by Technical Committee ISO/TC 156 “Corrosion of metals
and alloys” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11844-2:2008 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11844-2:2005 has been approved by CEN as a EN ISO 11844-2:2008 without any
modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 11844-2
First edition
2005-12-15


Corrosion of metals and alloys —
Classification of low corrosivity of indoor
atmospheres —
Part 2:
Determination of corrosion attack in
indoor atmospheres
Corrosion des métaux et alliages —
...