EN 16842-3:2018
(Main)Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity
Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity
This document specifies the requirements and test procedures for 360° visibility of reach trucks with a sit-on or stand-on operator (herein after referred to as trucks), without a load with a capacity up to and including 10 000 kg in accordance with ISO 5053-1 and it is intended to be used in conjunction with EN 16842-1.
Where specific requirements in this part are modified from the general requirements in EN 16842-1, the requirements of this part are truck specific and to be used for reach trucks with a sit-on or stand-on operator with a capacity ≤ 10 000 kg.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events, relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil 3: Schubstapler bis zu und einschließlich einer Nenntragfähigkeit von 10 000 kg
Dieses Dokument legt die Anforderungen und Prüfverfahren für die Rundumsicht (360°) von Schubstaplern mit sitzendem oder stehendem Fahrer und ohne Last (nachfolgend als „Flurförderzeuge“ bezeichnet) und mit einer Nenntragfähigkeit ≤ 10 000 kg in Übereinstimmung mit ISO 5053 1 fest. Es ist dafür vorgesehen, in Verbindung mit EN 16842 1 angewendet zu werden.
Wenn spezifische Anforderungen in diesem Teil von den allgemeinen Anforderungen in EN 16842 1 abweichen, sind die Anforderungen in diesem Teil für das Flurförderzeug spezifisch und für Schubstapler mit sitzendem oder stehendem Fahrer mit einer Nenntragfähigkeit ≤ 10 000 kg anzuwenden.
Dieser Teil von EN 16842 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, die für die Sichtverhältnisse des Bedieners für die betreffenden Maschinen relevant sind, wenn sie bestimmungsgemäß und unter Bedingungen, die vom Hersteller als Fehlanwendung vernünftigerweise vorhersehbar sind, verwendet werden.
Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification - Partie 3 : Chariots rétract ayant une capacité allant jusqu'à 10 000 kg inclus
Le présent document spécifie les prescriptions et les modes opératoires pour la visibilité sur 360° des chariots retract à conducteur assis ou debout (ci-après désignés chariots) sans charge, ayant une capacité allant jusqu'à 10 000 kg inclus conformes à l’ISO 5053-1, et il est destiné à être utilisé conjointement avec l’EN 16842-1.
Lorsque des prescriptions spécifiques de la présente partie sont modifiées par rapport aux prescriptions générales de l’EN 16842-1, les prescriptions de la présente partie sont spécifiques au chariot et sont à utiliser pour les chariots retract à conducteur assis ou debout ayant une capacité ≤ 10 000 kg.
La présente partie de l’EN 16842 traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs relatifs à la visibilité du conducteur pour les machines concernées lorsqu'elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisible par le fabricant.
Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika - Preskusna metoda in preverjanje - 3. del: Tovorna vozila z zmogljivostjo do vključno 10 000 kg
Ta evropski standard določa zahteve in preskusne postopke za 360-stopinjsko vidno polje voznika pri tovornih vozilih s sedečim ali stoječim upravljavcem in brez tovora (v nadaljevanju »vozilo«) z zmogljivostjo do vključno 10.000 kg v skladu s standardom ISO 5053 1 ter je predviden za uporabo skupaj s standardom FprEN 16842-1.
Kjer so posebne zahteve v tem delu spremenjene tako, da se razlikujejo od splošnih zahtev v standardu FprEN 16842-1, so zahteve iz tega dela posebne zahteve za vozila in se uporabljajo za tovorna vozila s sedečim ali stoječim upravljavcem z zmogljivostjo ≤ 10.000 kg.
Ta del standarda EN 16842 opisuje vsa večja tveganja, nevarne situacije in nevarne dogodke, kot je navedeno v dodatku ZA, preglednici ZA.1, v zvezi z vidnim poljem upravljavca pri ustreznih strojih, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2019
Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika -
Preskusna metoda in preverjanje - 3. del: Tovorna vozila z zmogljivostjo do
vključno 10 000 kg
Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach
trucks up to and including 10 000 kg capacity
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil
3: Schubstapler bis zu und einschließlich einer Nenntragfähigkeit von 10 000 kg
Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification -
Partie 3 : Chariots rétract ayant une capacité allant jusqu'à 10 000 kg inclus
Ta slovenski standard je istoveten z: EN 16842-3:2018
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 16842-3
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 53.060
English Version
Powered industrial trucks - Visibility - Test methods and
verification - Part 3: Reach trucks up to and including 10
000 kg capacity
Chariots de manutention automoteurs - Visibilité - Kraftbetriebene Flurförderzeuge - Sichtverhältnisse -
Méthodes d'essai et vérification - Partie 3 : Chariots Prüfverfahren und Verifikation - Teil 3: Schubstapler
rétract ayant une capacité allant jusqu'à 10 000 kg bis zu und einschließlich einer Nenntragfähigkeit von
inclus 10 000 kg
This European Standard was approved by CEN on 29 July 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16842-3:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Truck configuration . 6
4.1 General . 6
4.2 Fork arm dimensions . 6
5 Test equipment . 6
6 Test procedures for direct visibility. 6
6.1 Lighting equipment position . 6
6.1.1 General . 6
6.1.2 Stand-on operated trucks . 6
6.1.3 Sit-on operated trucks . 8
6.2 Test paths for reach trucks ≤ 10 000 kg . 8
6.3 Measurement procedure . 10
6.4 Test procedure for indirect visibility. 10
7 Acceptance criteria . 10
7.1 General . 10
7.2 Direct visibility . 10
7.2.1 General . 10
7.2.2 Travelling visibility . 10
7.2.3 Manoeuvring visibility . 10
7.2.4 Fork arms . 10
7.3 Indirect visibility . 10
7.4 Criteria for reach trucks up to and including 10 000 kg rated capacity . 11
8 Test report . 12
9 Information for use . 12
European foreword
This document (EN 16842-3:2018) has been prepared by Technical Committee CEN/TC 150 “Industrial
trucks – Safety”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This European Standard is intended to be used in combination with the requirements in EN 16842-1.
EN 16842 consists of the following parts under the general title Powered industrial trucks – Visibility –
Test methods and verification:
— Part 1: General requirements;
— Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg
capacity;
— Part 3: Reach trucks up to and including 10 000 kg capacity;
— Part 4: Industrial variable-reach trucks up to and including 10 000 kg capacity;
— Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity (in preparation);
— Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg
capacity;
— Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length
and longer;
— Part 8: Stand on counterbalance trucks up to and including 10 000 kg capacity (in preparation);
— Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position
— Part 10: Towing and pushing tractors and burden carriers
It is intended to develop additional parts related to the following machinery:
— Pallet stacking trucks (rider controlled);
— Single side loader;
— Multi-directional forklift truck;
— Articulated counterbalance lift truck;
— Non stacking low lift straddle carriers (as defined in ISO 5053-1:2015, 3.18);
— Stacking high lift straddle carriers (as defined in ISO 5053-1:2015, 3.19).
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Introduction
This document is a type-C standard as stated in EN ISO 12100.
This document is of relevance, in particular, for the following stakeholder groups representing the
market players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);
— health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.).
Others can be affected by the level of machinery safety achieved with the means of the document by the
above-mentioned stakeholder groups:
— machine users/employers (small, medium and large enterprises);
— machine users/employees (e.g. trade unions, organizations for people with special needs);
— service providers, e.g. for maintenance (small, medium and large enterprises);
— consumers (in case of machinery intended for use by consumers).
The above-mentioned stakeholder groups have been given the possibility to participate at the drafting
process of this document.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events
are covered are indicated in the Scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or type-
B standards, the requirements of this type-C standard take precedence over the requirements of the
other standards for machines that have been designed and built according to the requirements of this
type-C standard.
1 Scope
This document specifies the requirements and test procedures for 360° visibility of reach trucks with a
sit-on or stand-on operator (herein after referred to as trucks), without a load with a capacity up to and
including 10 000 kg in accordance with ISO 5053-1 and it is intended to be used in conjunction with
EN 16842-1.
Where specific requirements in this part are modified from the general requirements in EN 16842-1,
the requirements of this part are truck specific and to be used for reach trucks with a sit-on or stand-on
operator with a capacity ≤ 10 000 kg.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events,
relevant to the visibility of the operator for applicable machines when used as intended and under
conditions of misuse which are reasonably foreseeable by the manufacturer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16842-1:2018, Powered industrial trucks - Visibility - Test methods and verification - Part 1: General
requirements
EN ISO 3691-1:2015, Industrial trucks - Safety requirements and verification - Part 1: Self-propelled
industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-
1:2011, including Cor 1:2013)
ISO 5053-1, Industrial trucks - Terminology and classification - Part 1: Types of industrial trucks
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 16842-1, ISO 5053-1 and the
following apply.
NOTE Definition 3.1 of EN 16842-1:2018 is not applicable for trucks covered by this part.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
truck profile
contour which is determined by the largest rectangular width and length parallel to the longitudinal
axis of the truck, including the front vertical surface of the outriggers
Note 1 to entry: The blades of the fork arms are not taken into account.
Note 2 to entry: Excludes external projections such as, rail guidance systems, stabilizers or attachments that
extend beyond the profile of the truck.
3.2
outriggers
supporting structure of the truck to enable the positioning of the load centre of gravity within the
stability polygon
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Testmethoden zur Verifikation - Teil 3: Schubstapler ohne Fahrersitz bis zu und einschließlich einer Nenntragfähigkeit von 10 000 kgChariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification - Partie 3 : Chariots rétract allant jusqu'à 10 000 kg inclusPowered industrial trucks - Visibility - Test method and verification - Part 3: Reach trucks up to and including 10 000 kg53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 16842-3:2018SIST EN 16842-3:2019en,fr01-april-2019SIST EN 16842-3:2019SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16842-3
December
t r s z ICS
w uä r x r English Version
Powered industrial trucks æ Visibility æ Test methods and verification æ Part
uã Reach trucks up to and including
s r
r r r kg capacity Chariots de manutention automoteurs æ Visibilitß æ Mßthodes d 5essai et vßrification æ Partie
u ã Chariots rßtract ayant une capacitß allant jusqu 5à
s r
r r r kg inclus
Kraftbetriebene Flurförderzeuge æ Sichtverhältnisse æ Prüfverfahren und Verifikation æ Teil
uã Schubstapler bis zu und einschließlich einer Nenntragfähigkeit von
s r
r r r kg This European Standard was approved by CEN on
t { July
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z v tæ uã t r s z ESIST EN 16842-3:2019
¶
s r
r r r kg . 8 6.3 Measurement procedure . 10 6.4 Test procedure for indirect visibility. 10 7 Acceptance criteria . 10 7.1 General . 10 7.2 Direct visibility . 10 7.2.1 General . 10 7.2.2 Travelling visibility . 10 7.2.3 Manoeuvring visibility . 10 7.2.4 Fork arms . 10 7.3 Indirect visibility . 10 7.4 Criteria for reach trucks up to and including 10 000 kg rated capacity . 11 8 Test report . 12 9 Information for use . 12
capacity; — Part 3: Reach trucks up to and including 10 000 kg capacity; — Part 4: Industrial variable-reach trucks up to and including 10 000 kg capacity; — Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity (in preparation); — Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity; — Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer; — Part 8: Stand on counterbalance trucks up to and including 10 000 kg capacity (in preparation); — Part 9:
Order-picking, lateral- and front-stacking trucks with elevating operator position — Part 10: Towing and pushing tractors and burden carriers It is intended to develop additional parts related to the following machinery: — Pallet stacking trucks (rider controlled); — Single side loader; — Multi-directional forklift truck; — Articulated counterbalance lift truck; — Non stacking low lift straddle carriers (as defined in ISO 5053-1:2015, 3.18); — Stacking high lift straddle carriers (as defined in ISO 5053-1:2015, 3.19). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16842-3:2019
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.