Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard

This document specifies the required characteristics, tests and tooling applicable to male contacts 018, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-019.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 018: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Dieses Dokument legt die Anforderungen, Prüfungen und Werkzeuge für elektrische Stiftkontakte 018, Typ A, crimpbar, Klasse S, zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Es ist in Verbindung mit EN 3155 001 anzuwenden.
Die zugehörigen Buchsenkontakte sind in EN 3155 019 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 018 : Contacts électriques, mâles, type A, à sertir, classe S - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques mâles 018, de type A, à sertir, de classe S, utilisés dans les organes de connexion suivant l’EN 3155-002.
Il doit être utilisé conjointement avec l’EN 3155-001.
Les contacts femelles associés sont définis dans l’EN 3155-019.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 018. del: Električni kontakti, moški, tip A, nagubani, razred S - Standard za proizvod

Ta standard določa zahtevane značilnosti, preskuse in orodja za moške kontakte 018, tip A, nagubani, razred S, ki se uporabljajo v veznih elementih skladno s standardom EN 3155-002. Uporabljati ga je treba skupaj s standardom EN 3155-001. Povezani ženski kontakti so določeni v standardu EN 3155-019.

General Information

Status
Published
Publication Date
14-Jan-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
15-Jan-2020
Completion Date
15-Jan-2020

RELATIONS

Buy Standard

Standard
EN 3155-018:2020 - BARVE na PDF-str 13
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 3155-018:2020
01-marec-2020
Nadomešča:
SIST EN 3155-018:2006
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 018. del:
Električni kontakti, moški, tip A, nagubani, razred S - Standard za proizvod

Aerospace series - Electrical contacts used in elements of connection - Part 018:

Contacts, electrical, male, type A, crimp, class S - Product standard

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -

Teil 018: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie

018 : Contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-018:2020
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3155-018:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3155-018:2020
---------------------- Page: 2 ----------------------
SIST EN 3155-018:2020
EN 3155-018
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-018:2005
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 018: Contacts, electrical, male, type A,
crimp, class S - Product standard

Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur

les organes de connexion - Partie 018 : Contacts Verwendung in Verbindungselementen - Teil 018:

électriques, mâles, type A, à sertir, classe S - Norme de Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S -

produit Produktnorm
This European Standard was approved by CEN on 13 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-018:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3155-018:2020
EN 3155-018:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Required characteristics .............................................................................................................................. 5

5 Designation ..................................................................................................................................................... 14

6 Marking ............................................................................................................................................................. 14

7 Technical specification ............................................................................................................................... 14

---------------------- Page: 4 ----------------------
SIST EN 3155-018:2020
EN 3155-018:2020 (E)
European foreword

This document (EN 3155-018:2020) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This document shall be given the status of a national standard, either by publication of an identical text

or by endorsement, at the latest by July 2020, and conflicting national standards shall be withdrawn at

the latest by July 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 3155-018:2005.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North

Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 3155-018:2020
EN 3155-018:2020 (E)
1 Scope

This document specifies the required characteristics, tests and tooling applicable to male contacts 018,

type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-019.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard

EN 2591*, Aerospace series — Elements of electrical and optical connection — Test methods — General

EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical

specification

EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and

utilization of contacts

EN 3155-019, Aerospace series — Electrical contacts used in elements of connection — Part 019: Contacts,

electrical, female, type A, crimp, class S — Product standard

EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product

standard (Normal and tight tolerances)

ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system

SAE-AS22520, Crimping tools, wire termination, general specification for

SAE-AS81969, Installing and removal tools, connector electrical contact, general specification for

3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 3155-001 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

 ISO Online browsing platform: available at http://www.iso.org/obp
 IEC Electropedia: available at http://www.electropedia.org/
* All its parts quoted in this standard.

1) Published by: ISO International Organization for Standardization, http://www.iso.ch/

2) Published by: SAE National (US) Society of Automotive Engineers, http://www.sae.org/

---------------------- Page: 6 ----------------------
SIST EN 3155-018:2020
EN 3155-018:2020 (E)
4 Required characteristics
4.1 Specific characteristics

Type A contacts are for general application and class S corresponds to an operating temperature range

from  65 °C to 200 °C.
4.2 Dimensions and mass
See Figure 1, Figure 2 and Table 1.

Dimensions and tolerances are given in millimetres and apply after surface treatment.

Detail X
Key
1 Colour bands, see Table 2.
2 Break allowed
3 One side only
4 See EN 3155-001 for Length of Selective Protection “LSP” definition
5 Approximately spherical
Figure 1
---------------------- Page: 7 ----------------------
SIST EN 3155-018:2020
EN 3155-018:2020 (E)
Key
28° to 32° for contact 20-22, 14° to 16° for other contacts
Figure 2 — Barrel, contacts 20-22, 16-18 and 12-18
Table 1
Size B C D E Ø F Ø G Ø H Ø J
Contact Barrel min. m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.