CEN/TR 12098-6:2016

Controls for heating systems - Part 6: Accompanying TR prEN 12098-1:2015 - Modules M3-5,6,7,8

This Technical Report refers to prEN 12098-1:2015, Controls for heating systems — Part 1: Control equipment for hot water heating systems — Modules M3-5,6,7,8.
It contains information to support the correct understanding, use and national adaption of prEN 12098 1:2015.
This Technical Report does not contain any normative provision.

Begleitender TR zu EN 12098-1

Energijske lastnosti stavb - Naprave za regulacijo sistemov za ogrevanje - 6. del: Razlaga in utemeljitev prEN 12098-1:2015 - Moduli M3-5, 6, 7, 8

To tehnično poročilo se nanaša na standard prEN 12098-1:2015, Nadzor za sisteme ogrevanja – 1. del: Oprema za nadzor toplovodnih sistemov za ogrevanje – moduli M3-5,6,7,8.
Vsebuje informacije za podporo pravilnega razumevanja, uporabe in nacionalne prilagoditve standarda prEN 12098-1:2015.
To tehnično poročilo ne vsebuje nobenih normativnih določb.

General Information

• Status: Withdrawn
• Publication Date: 09-Aug-2016
• Withdrawal Date: 29-Nov-2022
• ICS: 91.140.10 - Central heating systems
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: CEN/TC 247 - Controls for mechanical building services
• Drafting Committee: CEN/TC 247/WG 6 - Electronic control equipment for HVAC applications, integrated room automation, controls and management systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 30-Nov-2022
• Directive: 2010/31/EU - Directive 2010/31/eu of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)
• Mandate: M/480 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance buildings (2010/31/EU)
• Ref Project: SIST-TP CEN/TR 12098-6:2018 - Controls for heating systems - Part 6: Accompanying TR prEN 12098-1:2015 - Modules M3-5,6,7,8

Relations

• Replaced By: CEN/TR 12098-6:2022 - Energy performance of buildings - Controls for heating systems - Part 6: Accompanying TR EN 12098-1:2022 - Modules M3-5,6,7,8
• Effective Date: 22-Jul-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2018
Energijske lastnosti stavb - Naprave za regulacijo sistemov za ogrevanje - 6. del:
Razlaga in utemeljitev prEN 12098-1:2015 - Moduli M3-5, 6, 7, 8
Controls for heating systems - Part 6: Accompanying TR prEN 12098-1:2015 - Modules
M3-5,6,7,8
Ta slovenski standard je istoveten z: CEN/TR 12098-6:2016
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TR 12098-6
TECHNICAL REPORT
RAPPORT TECHNIQUE
August 2016
TECHNISCHER BERICHT
ICS 91.140.10; 97.120
English Version
Controls for heating systems - Part 6: Accompanying TR
prEN 12098-1:2015 - Modules M3-5,6,7,8
Begleitender TR zu EN 12098-1
This Technical Report was approved by CEN on 11 April 2016. It has been drawn up by the Technical Committee CEN/TC 247.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 12098-6:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 7
4.1 Symbols . 7
4.2 Abbreviations . 8
5 Control heating systems, main design rules . 8
5.1 Control heating systems, main design rules, general . 8
5.2 Partitioning control heating zones in buildings . 8
5.2.1 General . 8
5.2.2 Emission control . 9
6 Control heating functions and they impact . 10
6.1 Flow temperature control . 10
6.1.1 General . 10
6.1.2 OTC generation and storage impact . 10
6.1.3 OTC control distribution impact . 11
6.1.4 OTC control emission impact . 11
6.2 Auto tuning heating curve parameters . 12
6.3 Compensation by emitters energy demand transmission . 12
6.4 Other meteorological variables and forecast . 12
6.5 Optimum Start-stop scheduling . 12
6.5.1 General . 12
6.5.2 OSS generation and storage impact . 12
6.5.3 OSS distribution impact . 12
6.5.4 OSS emission impact . 13
6.6 Summer-winter switch . 13
6.7 Pumps control . 14
7 Integrated functions in control systems and their impact . 14
7.1 Integrated functions . 14
7.2 Central control effect on room temperature control . 15
7.2.1 General . 15
7.2.2 Flow temperature control accuracy . 15
7.2.3 Heating curve adaptation . 15
7.2.4 Calculating contribution of central control to emission control. 15
Annex A (informative) Applications of heating control functions for buildings . 18
Bibliography . 20

European foreword
This document (CEN/TR 12098-6:2016) has been prepared by Technical Committee CEN/TC 247
“Building Automation, Controls and Building Management”, the secretariat of which is held by SNV.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is currently divided into the following parts:
— Controls for heating systems — Part 1: Control equipment for hot water heating systems;
— Controls for heating systems — Part 3: Control equipment for electrical heating systems;
— Controls for heating systems — Part 5: Start-stop schedulers for heating systems;
— Controls for heating systems — Part 6: Accompanying TR prEN 12098-1:2016 Modules M3-5,6,7,8
[the present Technical Report; currently at Voting stage];
— Controls for heating systems — Part 7: Accompanying TR prEN 12098-3:2016 Modules M3-5,6,7,8
[Technical Report; currently at Voting stage];
— Controls for heating systems — Part 8: Accompanying TR prEN 12098-5:2016 Modules M3-5,6,7,8
[Technical Report; currently at Voting stage].
Introduction
The CENSE project, the discussion between CEN and the Concerted action highlighted the high page
count of the entire package due to a lot of “textbook” information. This resulted in flooding and
confusing the normative text.
A huge amount of informative contents shall indeed be recorded and available for users to properly
understand, apply and nationally adapt the EPB standards.
The detailed technical rules CEN/TS 16629 ask for a clear separation between normative and
informative contents:
— to avoid flooding and confusing the actual normative part with informative content;
— to reduce the page count of the actual standard;
— to facilitate understanding of the package.
Therefore each EPB standard shall be accompanied by an informative technical report, like this one,
where all informative content is collected.
Table 1 shows the relative position of this TR within the EPB set of standards.
Table 1 — Relative position of this TR within the EN EPB package standards
Over- Building Technical Building System
arching (as such)
M M M M
sub1 M1 M2  M5 M6 M7 M8 M10
3 4 9 11
1 General General General
Common
terms and
Building
definitions;
2 Energy Needs
symbols,
Needs
units and
subscripts
(Free)
Indoor Maximum
3 Application Condition Load and
s without Power
Systems
Ways to
Ways to Ways to
Express
Express Express
4 Energy
Energy Energy
Performa
Performance Performance
nce
Heat
Building
Transfer
Functions and Emission and
5 by x
Building control
Transmis
Boundaries
sion
Heat
Building Transfer
Occupancy by
Distribution
6 and Infiltratio x
and control
Operating n and
Conditions Ventilatio
n
Aggregation
of Energy Internal
Storage and
7 Services and Heat x
control
Energy Gains
Carriers
8 x
Building Solar Generation
Submodule
Descriptions
Descriptions
Descriptions
Heating
Cooling
Ventilation
Humidification
Dehumidification
Domestic Hot
waters
Lighting
Building
automation and
control
PV, wind, .
Over- Building Technical Building System
arching (as such)
M M M M
sub1 M1 M2  M5 M6 M7 M8 M10
3 4 9 11
Partitioning Heat and control
Gains
Load
Building
Calculated dispatching
Dynamics
9 Energy and
(thermal
Performance operating
mass)
conditions
Measured
Measured Measured
Energy
10 Energy Energy
Performa
Performance Performance
nce
Inspectio
11 Inspection Inspection
n
Ways to
Express
12  BMS
Indoor
Comfort
External
13 Environment
Conditions
Economic
Calculation
Submodule
Descriptions
Descriptions
Descriptions
Heating
Cooling
Ventilation
Humidification
Dehumidification
Domestic Hot
waters
Lighting
Building
automation and
control
PV, wind, .
1 Scope
This Technical Report refers to EN 12098-1:2016, Controls for heating systems — Part 1: Control
equipment for hot water heating systems — Modules M3-5,6,7,8.
It contains information to support the correct understanding, use and national adaption of
prEN 12098-1:2016.
This Technical Report does not contain any normative provisions.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 215, Thermostatic radiator valves - Requirements and test methods
prEN 12098-1:2016, Controls for heating systems — Part 1: Control equipment for hot water heating
systems — Modules M3-5,6,7,8
prEN 15232-1:2016, Energy performance of buildings — Part 1: Impact of Building Automation, Controls
and Building Management — Modules M10-4,5,6,7,8,9,10
EN 15316–2-3:2007, Heating systems in buildings - Method for calculation of system energy requirements
and system efficiencies - Part 2-3: Space heating distribution systems
prEN 15316-3:2016, Heating systems and water based cooling systems in buildings — Method for
calculation of system energy requirements and system efficiencies — Part 3: Space distribution systems
(DHW, heating and cooling)
prEN 15316-4-1:2016, Heating systems and water based cooling systems in buildings — Method for
calculation of system energy requirements and system efficiencies — Part 4-1: Space heating and DHW
generation systems, combustion systems (boilers, biomass)
prEN 15500-1:2016, Control for heating, ventilating and air-conditioning applications — Part 1:
Electronic individual zone control equipment — Modules M3-5,M4-5,M5-5
prEN ISO 52000-1:2016, Energy performance of buildings — Overarching EPB assessment — Part 1:
General framework and procedures (ISO/DIS 52000-1:2016)
EN ISO 7345:1995, Thermal insulation - Physical quantities and definitions (ISO 7345:1987)
3 Terms and definitions
For the purposes of this technical report, the terms and definitions given in EN ISO 7
...