EN ISO 8748:1997

Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997)

Spiralspannstifte - Schwere Ausführung (ISO 8748:1997)

Diese Internationale Norm beschreibt die Eigenschaften von Spiralspannstiften aus Stahl oder aus austenitischem oder martensitischem nichtrostendem Stahl, schwere Ausführung, mit Nenndurchmessern d1 von 1,5 mm bis einschließlich 20 mm. Anmerkung: Spiralspannstifte in Regelausführung und in leichter Ausführung werden in ISO 8750 und ISO 8751 behandelt.

Goupilles élastiques spiralées - Série épaisse (ISO 8748:1997)

Spiralno zviti vzmetni zatiči - Težka izvedba (ISO 8748:1997)

General Information

• Status: Withdrawn
• Publication Date: 14-Nov-1997
• Withdrawal Date: 14-Apr-2007
• ICS: 21.060 - Fasteners
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Apr-2007
• Completion Date: 15-Apr-2007
• Ref Project: SIST EN ISO 8748:2001 - Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997)

Relations

• Replaced By: EN ISO 8748:2007 - Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8748:2001
01-julij-2001
6SLUDOQR]YLWLY]PHWQL]DWLþL7HåNDL]YHGED,62
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997)
Spiralspannstifte - Schwere Ausführung (ISO 8748:1997)
Goupilles élastiques spiralées - Série épaisse (ISO 8748:1997)
Ta slovenski standard je istoveten z: EN ISO 8748:1997
ICS:
21.060.50 =DWLþLåHEOML Pins, nails
SIST EN ISO 8748:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8748:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 8748:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 8748:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 8748:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 8748:2001

---------------------- Page: 6 ----------------------

SIST EN ISO 8748:2001
INTERNATIONAL ISO
STANDARD 8748
Second edition
1997-11-15
Spring-type straight pins — Coiled, heavy
duty
Goupilles élastiques spiralées — Série épaisse
A
Reference number
ISO 8748:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 8748:2001
ISO 8748:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 8748 was prepared by Technical Committee
ISO/TC 2, Fasteners.
This second editon cancels and replaces the first edition (ISO 8748:1987),
which has been technically revised.
Annex A of this International Standard is for information only.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 8748:2001
©
INTERNATIONAL STANDARD  ISO ISO 8748:1997(E)
Spring-type straight pins – Coiled, heavy duty
1 Scope
This International Standard specifies the characteristics of heavy duty coiled spring-type straight pins made of
steel or of austenitic or martensitic stainless steel, with nominal diameter, d , from 1,5 mm to 20 mm inclusive.
1
NOTE —  Spring-type straight pins, coiled, standard duty and spring type straight pins, coiled, light duty, are
the subjects of ISO 8750 and ISO 8751 respectively.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject
to revision, and parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO
maintain registers of currently valid International Standards.
ISO 3269:1988, Fasteners – Acceptance inspection.
1)
ISO 4042:— , Fasteners – Electroplated coatings.
ISO 8749:1986, Pins and grooved pins – Shear test.
3 Dimensions
See figure 1 and table 1.
1) Swaged chamfer at both ends
Figure 1
——————
1) To be published. (Revision of ISO 4042:1989)
1

---------------------- Page: 9 ----------------------

SIST EN ISO 8748:2001
...