EN 13956:2005
(Main)Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
This European Standard specifies the definitions and characteristics of plastic and rubber sheets including sheets made out of their blends and alloys (thermoplastic rubber) for which the intended use is roof waterproofing. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard.
NOTE For typical materials and applications, see Annex E.
Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Definitionen und Eigenschaften
Diese Europäische Norm legt die Definitionen und Eigenschaften von Kunststoff- und Elastomerbahnen einschließlich der aus deren Gemischen und Mischungen (thermoplastische Elastomere) hergestellten Bahnen fest, die hauptsächlich für Dächer verwendet werden. Sie legt die Anforderungen und Prüfverfahren fest und schafft die Voraussetzungen für die Bewertung der Konformität der Produkte mit den Anforderungen dieser Europäischen Norm.
ANMERKUNG Siehe Anhang E hinsichtlich üblicher Werkstoffe und Anwendungen.
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastique et élastomère - Définitions et caractéristiques
La présente Norme européenne spécifie les définitions et caractéristiques des feuilles plastiques et élastomères, y compris les feuilles composées de mélanges de plastiques et d'élastomères (caoutchouc thermoplastique) dont l'utilisation prévue est l'étanchéité des toitures. Elle spécifie les exigences et les méthodes d'essais et prévoit le cadre d'évaluation de la conformité des produits aux exigences de la présente norme.
NOTE Pour les matériaux et applications spécifiques, voir Annexe E.
Hidroizolacijski trakovi – Polimerni in elastomerni trakovi za tesnjenje streh – Definicije in lastnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi – Polimerni in elastomerni trakovi za tesnjenje streh – Definicije in lastnostiAbdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Definitionen und EigenschaftenFeuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastique et élastomere - Définitions et caractéristiquesFlexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofs01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13956:2005SIST EN 13956:2005en01-november-2005SIST EN 13956:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13956September 2005ICS 01.040.91; 91.100.50 English VersionFlexible sheet for waterproofing - Plastic and rubber sheets forroof waterproofing - Definitions and characteristicsFeuilles souples d'étanchéité - Feuilles d'étanchéité detoiture plastique et caoutchouc - Définitions etcaractéristiquesAbdichtungsbahnen - Kunststoff- und Elastomerbahnen fürDachabdichtung - Definitionen und EigenschaftenThis European Standard was approved by CEN on 22 July 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13956:2005: ESIST EN 13956:2005
Applicability of characteristics.14 Annex B (normative)
Initial type test and frequencies of testing for factory production control.16 B.1 Type testing.16 B.2 Testing for factory production control (FPC).16 Annex C (informative)
Information about chemical resistance.17 Annex D (informative)
Example of a product data sheet.19 Annex E (informative)
Typical materials, structure of sheets and roofing systems.21 E.1 Typical materials.21 E.1.1 General.21 E.1.2 Plastics.21 E.1.3 Rubbers.21 E.1.4 Thermoplastic rubbers.22 E.2 Installation.22 E.3 Typical roofing systems.23 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.25 ZA.1 Scope and relevant characteristics.25 ZA.2 Procedure for attestation of conformity of plastic and rubber sheets.26 ZA.2.1 Systems of attestation of conformity.26 ZA.2.2 EC Certificate and declaration of conformity.29 ZA.3 CE marking and labelling.29 Bibliography.32
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.