EN 12441-2:2001/A2:2004

Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method

This European Standard specifies a titrimetric method for the determination of aluminium in zinc alloys.  It is applicable to the products specified in EN 1774 and EN 12844.  It is suitable for the determination of aluminium contents (mass fractions) between 3% and 30%.

Zink und Zinklegierungen - Chemische Analyse - Teil 2: Bestimmung von Magnesium in Zinklegierungen - FAAS-Verfahren

Zinc et alliages de zinc - Analyse chimique - Partie 2 : Dosage du magnésium dans les alliages de zinc - Méthode par spectrométrie d'absorption atomique dans la flamme

Cink in cinkove zlitine – Kemična analiza – 2. del: Določevanje magnezija v cinkovih zlitinah – Metoda plamenske atomske absorpcijske spektrometrije – Dopolnilo A2

General Information

• Status: Published
• Publication Date: 30-Nov-2004
• Withdrawal Date: 29-Jun-2005
• ICS: 77.040.30 - Chemical analysis of metals
• ICS: 77.120.60 - Lead, zinc, tin and their alloys
• Technical Committee: CEN/TC 209 - Zinc and zinc alloys
• Drafting Committee: CEN/TC 209 - Zinc and zinc alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2004
• Completion Date: 01-Dec-2004
• Ref Project: SIST EN 12441-2:2004/A2:2005 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method

Relations

• Amends: EN 12441-2:2001 - Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12441-2:2004/A2:2005
01-februar-2005
&LQNLQFLQNRYH]OLWLQH±.HPLþQDDQDOL]D±GHO'RORþHYDQMHPDJQH]LMDY
FLQNRYLK]OLWLQDK±0HWRGDSODPHQVNHDWRPVNHDEVRUSFLMVNHVSHNWURPHWULMH±
'RSROQLOR$
Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc
alloys - Flame atomic absorption spectrometric method
Zink und Zinklegierungen - Chemische Analyse - Teil 2: Bestimmung von Magnesium in
Zinklegierungen - FAAS-Verfahren
Zinc et alliages de zinc - Analyse chimique - Partie 2 : Dosage du magnésium dans les
alliages de zinc - Méthode par spectrométrie d'absorption atomique dans la flamme
Ta slovenski standard je istoveten z: EN 12441-2:2001/A2:2004
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.120.60 Svinec, cink, kositer in Lead, zinc, tin and their
njihove zlitine alloys
SIST EN 12441-2:2004/A2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12441-2:2004/A2:2005

---------------------- Page: 2 ----------------------

SIST EN 12441-2:2004/A2:2005
EUROPEAN STANDARD
EN 12441-2:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 77.040.30; 77.120.60
English version
Zinc and zinc alloys - Chemical analysis - Part 2: Determination
of magnesium in zinc alloys - Flame atomic absorption
spectrometric method
Zinc et alliages de zinc - Analyse chimique - Partie 2 : Zink und Zinklegierungen - Chemische Analyse - Teil 2:
Dosage du magnésium dans les alliages de zinc - Méthode Bestimmung von Magnesium in Zinklegierungen - FAAS-
par spectrométrie d'absorption atomique dans la flamme Verfahren
This amendment A2 modifies the European Standard EN 12441-2:2001; it was approved by CEN on 21 October 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyp
...