Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools

The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands - a suspension, e.g. a balancer. This part, EN 792-4, applies to non-electric power tools used for chipping, riveting, breaking of concrete and asphalt, ramming etc. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime.

Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 4: Nicht drehende, schlagende Maschinen

Diese Norm EN 792 gilt für handgehaltene nicht-elektrisch betriebene Maschinen, die durch Motore mit drehender oder linearer Bewegung angetrieben werden, wobei die Energie aus Druckluft oder über Hydraulikflüssigkeit bezogen werden kann. Die Maschinen sind dazu bestimmt, durch eine Person verwendet und - mit einer oder beiden Händen gehalten, - in einer Halterung, z.B. Aufhängevorrichtung, aufgenommen zu werden. Dieser Teil, EN 792-4, gilt für handgehaltene nicht-elektrisch betriebene Maschinen zum Meißeln, Nieten, Aufbrechen von Beton oder Asphalt, Hämmern usw.

Machines portatives à moteur non électrique - Prescriptions de sécurité - Partie 4: Machines portatives non rotatives à percussion

La norme EN 792 s'applique aux machines portatives non électriques entraînées par des moteurs rotatifs ou linéaires, alimentés par air comprimé, fluide hydraulique et prévues pour être utilisées par un seul opérateur et portée par: - la ou les main(s) de l'opérateur, - en suspension, p.e. à l'aide d'un équilibreur. Cette partie, EN 792-4, s'applique aux machines portatives non électriques utilisées pour buriner, river, briser le béton et l'asphalte, dammer, etc.; elle spécifie les prescriptions de sécurité qui s'y rapportent.

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools

General Information

Status
Withdrawn
Publication Date
20-Jun-2000
Withdrawal Date
09-Sep-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
10-Sep-2008
Completion Date
10-Sep-2008

Relations

Buy Standard

Standard
EN 792-4:2000
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 792-4:2000
01-december-2000
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary
percussive power tools
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive
power tools
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
4: Nicht drehende, schlagende Maschinen
Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 4:
Machines portatives non rotatives a percussion
Ta slovenski standard je istoveten z: EN 792-4:2000
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
SIST EN 792-4:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 792-4:2000

---------------------- Page: 2 ----------------------

SIST EN 792-4:2000

---------------------- Page: 3 ----------------------

SIST EN 792-4:2000

---------------------- Page: 4 ----------------------

SIST EN 792-4:2000

---------------------- Page: 5 ----------------------

SIST EN 792-4:2000

---------------------- Page: 6 ----------------------

SIST EN 792-4:2000

---------------------- Page: 7 ----------------------

SIST EN 792-4:2000

--------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.