EN 14594:2005

Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking

This document specifies minimum requirements for continuous flow compressed air line breathing apparatus for use with a full face mask, half mask, or incorporating a hood, helmet or suit, and apparatus used in abrasive blasting operations, as a respiratory protective device. Escape and diving apparatus are not covered by this document.
Laboratory and practical performance tests are included for the assessment of conformance to the requirements.

Atemschutzgeräte - Druckluft-Schlauchgeräte mit kontinuierlichem Luftstrom - Anforderungen, Prüfung, Kennzeichnung

Dieses Dokument legt Mindestanforderungen für Druckluft-Schlauchgeräte mit kontinuierlichem Luftstrom zum
Gebrauch mit einer Vollmaske, Halbmaske oder enthält eine Haube, einen Helm oder einen Anzug, und für
Geräte zum Gebrauch bei Strahlarbeiten als Atemschutzgerät fest. Dieses Dokument gilt nicht für
Fluchtgeräte und Tauchgeräte.
Laborprüfungen und praktische Leistungsprüfungen sind enthalten, um die Übereinstimmung mit den
Anforderungen feststellen zu können.

Appareils de protection respiratoire - Appareils de protection respiratoire isolants à adduction d'air comprimé à débit continu - Exigences, essais, marquage

La présente Norme européenne fixe les spécifications minimales des appareils de protection respiratoire isolants à adduction d'air comprimé à débit continu dotés de masques complets, demi-masques ou avec cagoule ou casque en tant qu'appareils de protection respiratoire. Les appareils destinés à l'évacuation, à la plongée et ceux utilisés dans les opérations de projections d'abrasifs sans dispositifs de protection supplémentaires ne sont pas couverts par la présente Norme européenne.
Elle contient des essais pratiques de performance et des essais en laboratoire pour s'assurer de la conformité avec les exigences.

Oprema za varovanje dihal - Dihalni aparat na stisnjeni zrak s trajnim pretokom - Zahteve, preskušanje, označevanje

General Information

• Status: Withdrawn
• Publication Date: 19-Apr-2005
• Withdrawal Date: 15-May-2018
• ICS: 13.340.30 - Respiratory protective devices
• Technical Committee: CEN/TC 79 - Respiratory protective devices
• Drafting Committee: CEN/TC 79/SC 5 - Fresh air hose and compressed air line breathing apparatus
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-May-2018
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Directive: 93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC
• Directive: 93/95/EEC - Personal protective equipment (Dir. 89/686/EEC amendment)
• Directive: 96/58/EC - Personal protective equipment (Dir. 89/686/EEC amendment)
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 14594:2005 - Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking

Relations

• Replaces: EN 270:1994 - Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirement, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 271:1995/AC:1997 - Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 139:1994/AC:1995 - Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 139:1994/A1:1999 - Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or mouthpiece assembly - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 139:1994 - Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 271:1995 - Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 12419:1999 - Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 271:1995/A1:2000 - Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 270:1994/A1:2000 - Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaces: EN 1835:1999 - Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking
• Effective Date: 22-Dec-2008
• Replaced By: EN 14594:2018 - Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking
• Effective Date: 09-Dec-2015
• Corrected By: EN 14594:2005/AC:2005 - Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking
• Effective Date: 08-Jun-2022

Standards Content (Sample)

STANDARDOprema za varovanje dihal - Dihalni aparat na stisnjeni zrak s trajnim pretokom - Zahteve, preskušanje, označevanjeRespiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 14594:2005(en)ICS13.340.30

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14594April 2005ICS 13.340.30Supersedes EN 12419:1999, EN 139:1994, EN1835:1999, EN 270:1994, EN 271:1995English versionRespiratory protective devices - Continuous flow compressed airline breathing apparatus - Requirements, testing, markingAppareils de protection respiratoire - Appareils deprotection respiratoire isolants à adduction d'air compriméà débit continu - Exigences, essais, marquageAtemschutzgeräte - Druckluft-Schlauchgeräte mitkontinuierlichem Luftstrom - Anforderungen, Prüfung,KennzeichnungThis European Standard was approved by CEN on 15 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14594:2005: E

Marking.42 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC (PPE).43 Bibliography.46
...