EN 1354:2005

Determination of compressive strength of lightweight aggregate concrete with open structure

This European Standard specifies a method of determining the compressive strength of lightweight aggregate concrete with open structure (LAC) according to EN 1520.
The reference test method uses test specimens (cores or cubes) taken from prefabricated components.
Test specimens cast separately in moulds may also be used. This alternative procedure is described in Annex A.

Bestimmung der Druckfestigkeit von haufwerksporigem Leichtbeton

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Druckfestigkeit von haufwerksporigem
Leichtbeton (LAC) nach EN 1520 fest.
Beim Referenzprüfverfahren werden Probekörper (Bohrkerne oder Würfel) verwendet, die vorgefertigten
Bauteilen entnommen werden.
Es dürfen auch getrennt in Formen hergestellte Probekörper verwendet werden. Dieses Alternativprüfverfahren
ist in Anhang A beschrieben.

Détermination de la résistance à la compression du béton de granulats légers à structure ouverte

La présente Norme européenne spécifie le mode opératoire de détermination de la résistance à la compression du béton de granulats légers à structure ouverte (LAC) conformément au prEN 1520.
La méthode d'essai de référence utilise des éprouvettes (cylindriques ou cubiques) prélevées dans les éléments préfabriqués.
Les éprouvettes coulées séparément dans des moules peuvent également être utilisées. Cet autre mode opératoire est décrit dans l'Annexe A.

Ugotavljanje tlačne trdnosti betona iz lahkega agregata z odprto strukturo

General Information

• Status: Published
• Publication Date: 05-Jul-2005
• Withdrawal Date: 30-Jan-2006
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
• Drafting Committee: CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 04-Mar-2020
• Ref Project: SIST EN 1354:2005 - Determination of compressive strength of lightweight aggregate concrete with open structure

Relations

• Replaces: EN 1354:1996 - Determination of compressive strength of lightweight aggregate concrete with open structure
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1354:2005
01-december-2005
1DGRPHãþD
SIST EN 1354:2001
8JRWDYOMDQMHWODþQHWUGQRVWLEHWRQDL]ODKNHJDDJUHJDWD]RGSUWRVWUXNWXUR
Determination of compressive strength of lightweight aggregate concrete with open
structure
Bestimmung der Druckfestigkeit von haufwerksporigem Leichtbeton
Détermination de la résistance a la compression du béton de granulats légers a structure
ouverte
Ta slovenski standard je istoveten z: EN 1354:2005
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 1354:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1354:2005

---------------------- Page: 2 ----------------------

SIST EN 1354:2005



EUROPEAN STANDARD
EN 1354

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2005
ICS 91.100.30 Supersedes EN 1354:1996
English version
Determination of compressive strength of lightweight aggregate
concrete with open structure
Détermination de la résistance à la compression du béton Bestimmung der Druckfestigkeit von haufwerksporigem
de granulats légers à structure ouverte Leichtbeton
This European Standard was approved by CEN on 3 June 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1354:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1354:2005
EN 1354:2005 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
5 Test specimens.5
6 Compression test.7
7 Test results.7
8 Test report .8
Annex A (normative) Determination of compressive strength of lightweight aggregate concrete
with open structure on test specimens east in moulds.10
Annex B (informative) Determination of the fresh density of LAC in situ by means of the water
replacement method.13
Bibliography .16

2

---------------------- Page: 4 ----------------------

SIST EN 1354:2005
EN 1354:2005 (E)
Foreword
This European Standard (EN 1354:2005) has been prepared by Technical Committee CEN/TC 177
“Prefabricated reinforced components of autoclaved
...