EN 771-5:2011/FprA1
(Amendment)Specification for masonry units - Part 5: Manufactured stone masonry units
Specification for masonry units - Part 5: Manufactured stone masonry units
This European Standard specifies the characteristics and performance requirements of manufactured stone masonry units for which the main intended uses are facing or exposed masonry in load bearing or non-load bearing building and civil engineering applications. The units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption. This standard covers concrete masonry units manufactured to resemble natural stone using casting or pressing techniques with or without textured surfaces produced, by casting, splitting, washing, blasting or tooling and with or without variable outline effects. It covers homogeneous masonry units and those consisting of different facing and backing concrete mixes but excludes those manufactured with an adhesive bonded decorative face. This standard does not cover masonry units intended to conform to EN 771-3. It defines the performance related to e.g. strength, density, dimensional accuracy, surface appearance and provides for the evaluation of conformity of the product to this European Standard. The marking requirements for products covered by this European Standard are also included. This European Standard does not apply to storey height panels, masonry units used for chimney flues or units manufactured with an adhesive bonded decorative face. It does not include products intended to be used as a damp proof course nor does it specify standard sizes for manufactured stone masonry units or work dimensions and angles of specially shaped units. It does not cover units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire.
Festlegungen für Mauersteine - Teil 5: Betonwerksteine
Spécifications pour éléments de maçonnerie - Partie 5: Eléments de maçonnerie en pierre reconstituée
Specifikacija za zidake - 5. del: Zidaki iz umetnega kamna
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 771-5:2011/kFprA1:2014
01-oktober-2014
Specifikacija za zidake - 5. del: Zidaki iz umetnega kamna
Specification for masonry units - Part 5: Manufactured stone masonry units
Festlegungen für Mauersteine - Teil 5: Betonwerksteine
Spécifications pour éléments de maçonnerie - Partie 5: Eléments de maçonnerie en
pierre reconstituée
Ta slovenski standard je istoveten z: EN 771-5:2011/FprA1
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 771-5:2011/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 771-5:2011/kFprA1:2014
---------------------- Page: 2 ----------------------
SIST EN 771-5:2011/kFprA1:2014
EUROPEAN STANDARD
FINAL DRAFT
EN 771-5:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2014
ICS 91.100.30
English Version
Specification for masonry units - Part 5: Manufactured stone
masonry units
Spécifications pour éléments de maçonnerie - Partie 5: Festlegungen für Mauersteine - Teil 5: Betonwerksteine
Eléments de maçonnerie en pierre reconstituée
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 125.
This draft amendment A1, if approved, will modify the European Standard EN 771-5:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 771-5:2011/FprA1:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 771-5:2011/kFprA1:2014
EN 771-5:2011/FprA1:2014 (E)
Contents
Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to the Scope .4
3 Modification to 5.1, General .4
4 Modification to 5.5.1, Declared value .4
5 Addition of a new subclause 5.14 .4
6 Modification to Clause 8, Evaluation of conformity .4
7 Modifications to 8.1, General .4
8 Modifications to 8.2, Initial type testing .5
9 Modification to 8.3.1, General .5
10 Modification to 8.3.10 .5
11 Modification to Annex A .6
12
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.