Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO 13141 - Part 2: Abstract test suite (ISO 13140-2:2016)

ISO 13140-2:2016 specifies the abstract test suite (ATS) to evaluate the conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO 13141:2015 in accordance with the test suite structure and test purposes defined in ISO 13140‑1:2016.
It provides a basis for conformance tests for dedicated short-range communication (DSRC) equipment (OBE and RSE) to support interoperability between different equipment supplied by different manufacturers.

Elektronische Gebührenerhebung - Bewertung der Konformität fahrzeuginterner und straßenseitiger Ausrüstung nach ISO 13141 - Teil 2: Zusammengefasstes Prüfprogramm (ISO 13140-2:2016)

Perception du télépéage - Évaluation de conformité des équipements embarqués et des équipements d'infrastuctures routières à l'ISO 13141 - Partie 2: Suite d'essais abstraite (ISO 13140-2:2016)

L'ISO 13140-2:2016 spécifie la suite d'essais abstraite (ATS) visant à évaluer la conformité des équipements embarqués (OBE) ainsi que des équipements d'infrastructures routières (RSE) par rapport à l'ISO 13141:2015 conformément à la structure de la suite d'essais et aux intentions d'essai définies dans l'ISO 13140‑1:2016.
Elle constitue une base pour les essais de conformité relatifs aux équipements de communication dédiée à courte portée (DSRC) (OBE et RSE) afin de permettre l'interopérabilité entre les différents équipements fournis par les différents constructeurs.
NOTE       Les OBE et les RSE sont soumis à des essais complémentaires afin de vérifier qu'ils satisfont aux exigences radio essentielles établies dans les Directives européennes, ce qui constitue une condition prérequise pour le marquage CE et la mise sur le marché européen. En outre, ils sont susceptibles d'être soumis à des essais complémentaires concernant l'endurance physique et environnementale, l'assurance et le contrôle qualité au stade fabrication, ainsi que l'intégration de points d'imputation dans le cadre des essais de réception en usine, sur site et de système. La définition de ces essais ne relève pas du domaine d'application de la présente partie de l'ISO 13140.

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme v vozilu in obcestni napravi s standardom EN ISO 13141 - 2. del: Abstraktni preskuševalni niz (ISO 13140-2:2016)

Ta dokument določa abstraktni preskuševalni niz (ATS) za vrednotenje skladnosti opreme v vozilu (OBE) in obcestnih napravah (RSE) v skladu s standardom ISO 13141:2015 skladno z zgradbo preskuševalnega niza in namenom preskušanja, kot je opredeljeno v standardu ISO 13140-1:2016.
Zagotavlja podlago za preskuse skladnosti za namensko komunikacijsko opremo kratkega dosega (DSRC) (oprema v vozilu in obcestnih napravah) za zagotavljanje interoperabilnosti različne opreme različnih proizvajalcev.
OPOMBA: Oprema v vozilu (OBE) in obcestnih napravah (RSE) je predmet dodatnega preskušanja za namene zagotavljanja, da izpolnjuje bistvene zahteve za radio, opredeljene v evropskih direktivah, kar je predpogoj za pridobitev oznake CE in trženje na evropskem tržišču. Poleg tega bodo najverjetneje izvedeni dodatni preskusi za fizično ali okoljsko vzdržljivost, zagotavljanje kakovosti, nadzor pri proizvodnji in integracijo plačilne točke kot del tovarniškega, lokacijskega in sistemskega preskušanja skladnosti. Definicija teh preskusov ne spada na področje uporabe tega dokumenta.

General Information

Status
Published
Publication Date
06-Dec-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
07-Dec-2016
Completion Date
07-Dec-2016

Relations

Buy Standard

Standard
EN ISO 13140-2:2017
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13140-2:2017
01-april-2017
1DGRPHãþD
SIST-TS CEN ISO/TS 13140-2:2012
Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme v vozilu in
obcestni napravi s standardom EN ISO 13141 - 2. del: Abstraktni preskuševalni niz
(ISO 13140-2:2016)
Electronic fee collection - Evaluation of on-board and roadside equipment for conformity
to EN ISO 13141 - Part 2: Abstract test suite (ISO 13140-2:2016)
Elektronische Gebührenerhebung - Bewertung der Konformität von fahrzeuginternen und
straßenseitigen Ausrüstungen nach EN ISO 13141 - Teil 2: Zusammengefasstes
Prüfprogramm (ISO 13140-2:2016)
Perception du télépéage - Évaluation de conformité des équipements embarqués et des
équipements d'infrastructures routières quant à la conformité avec l'ISO 13141 - Partie 2:
Suite d'essais abstraite (ISO 13140-2:2016)
Ta slovenski standard je istoveten z: EN ISO 13140-2:2016
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
SIST EN ISO 13140-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13140-2:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 13140-2:2017


EN ISO 13140-2
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2016
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 13140-2:2012
English Version

Electronic fee collection - Evaluation of on-board and
roadside equipment for conformity to EN ISO 13141 - Part
2: Abstract test suite (ISO 13140-2:2016)
Perception du télépéage - Évaluation des équipements Elektronische Gebührenerhebung - Bewertung der
embarqués et en bord de route quant à la conformité Konformität von fahrzeuginternen und straßenseitigen
avec l'ISO 13141 - Partie 2: Suite d'essais abstraite (ISO Ausrüstungen nach EN ISO 13141 - Teil 2:
13140-2:2016) Zusammengefasstes Prüfprogramm (ISO 13140-
2:2016)
This European Standard was approved by CEN on 6 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13140-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13140-2:2017
EN ISO 13140-2:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13140-2:2017
EN ISO 13140-2:2016 (E)
European foreword
This document (EN ISO 13140-2:2016) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN ISO/TS 13140-2:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Aus
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.