iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 23369:1993

(Main)

Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:1975)

Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:1975)

Undurchlässige Sintermetalle und Hartmetalle - Ermittlung der Dichte (ISO 3369:1975)

Matériaux en métal fritté imperméable et métaux-durs - Détermination de la masse volumique (ISO 3369:1975)

Décrit une architecture de couche application utilisée pour communiquer avec les équipements de comptage. Le support physique et les protocoles de couches basses qui y sont associés dans un modèle réduit à 3 couches ne sont pas specifiés. Le protocole DLMS est couvert par la CEI 61334-4-41. C'est un Rapport technique de type 2.

Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:1975)

General Information

Status
Withdrawn
Publication Date
06-Apr-1993
Withdrawal Date
27-Apr-2010
ICS
77.160 - Powder metallurgy
Technical Committee
CEN/SS M11 - Powder metallurgy
Drafting Committee
CEN/SS M11 - Powder metallurgy
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
28-Apr-2010
Completion Date
28-Apr-2010
Ref Project
SIST EN 23369:2000 - Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:1975)

Relations

Replaced By
EN ISO 3369:2010 - Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
Effective Date
01-May-2010

Buy Standard

EN 23369:2000EN 23369:2000
PreviousNext
Standard
EN 23369:2000
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 23369:2000
01-december-2000
Impermeable sintered metal materials and hardmetals - Determination of density
(ISO 3369:1975)
Impermeable sintered metal materials and hardmetals - Determination of density (ISO
3369:1975)
Undurchlässige Sintermetalle und Hartmetalle - Ermittlung der Dichte (ISO 3369:1975)
Matériaux en métal fritté imper
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5842:2023(Main)
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
SIST EN ISO 5842:2023

This document specifies a gas chromatography and a mass spectrometry method of detecting the presence of argon in metal powder produced components, consolidated by hot isostatic pressing.
This document specifies the calibration and functionality test for the equipment covered. It also specifies methods for sampling, sample preparation and sample test procedure of PM HIP components to detect argon presence.
Components produced by additive manufacturing are not covered in this document.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3995:2023(Main)
Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
SIST EN ISO 3995:2023

This document specifies a method for the determination of green strength by measuring the transverse rupture strength of compacts of rectangular cross-section.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4491-2:2023(Main)
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:2023)
SIST EN ISO 4491-2:2023

This document specifies a method for the determination of the relative loss of mass which a metallic powder undergoes when heated in a stream of pure dry hydrogen under specified conditions.
The purpose of this test is to evaluate a chemical powder characteristic which is of importance to the powder metallurgical industry. The test is not intended as a means for the determination of the content of specific elements (see Annex A and ISO 4491-1).
The test method is applicable to unalloyed, partially alloyed and completely alloyed powders of the metals listed in Table 1 (see 7.2.1). It is not applicable to lubricated powders or to mixtures of metal powders.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4491-1:2023(Main)
Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:2023)
SIST EN ISO 4491-1:2023

This document is the first part of a series of standards dealing with the determination of oxygen content in metallic powders by reduction methods. It specifies general guidance to these methods and gives some recommendations for the correct interpretation of the results obtained.
The test methods are applicable generally to all powders of metals, alloys, carbides and mixtures thereof. The constituents of the powder shall be non-volatile under the conditions of test. The powder shall be free of lubricant or organic binder.
However, there exist certain limitations which depend upon the nature of the analysed metal. These limitations are discussed in Clause 4.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3252:2023(Main)
Powder metallurgy - Vocabulary (ISO 3252:2023)
SIST EN ISO 3252:2023

This document defines terms related to powder metallurgy.
Powder metallurgy is the branch of metallurgy which relates to the manufacture of metallic powders, or of articles made from such powders with or without the addition of non-metallic powders, by the application of forming and sintering processes.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5755:2022(Main)
Sintered metal material - Specifications (ISO 5755:2022)
SIST EN ISO 5755:2022

This document specifies the requirements for the chemical composition and the mechanical and physical properties of sintered metal materials used for bearings and structural parts.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28080:2021(Main)
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
SIST EN ISO 28080:2021

This document specifies a generic test method to determine the abrasion wear characteristics of hardmetals.
The test is appropriate for use in situations where test laboratories have a need to simulate abrasive damage. The procedure includes information which enables the test to be used in a variety of different conditions:
a)   with counterface wheels of different stiffness (for example steel and rubber);
b)   wet and dry;
c)   different abrasive sizes;
d)   different chemical environments.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4499-1:2020(Main)
Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)
SIST EN ISO 4499-1:2020

This document specifies the methods of metallographic determination of the microstructure of hardmetals using photomicrographs.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4499-2:2020(Main)
Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
SIST EN ISO 4499-2:2020

This document gives guidelines for the measurement of hardmetal grain size by metallographic techniques only using optical or electron microscopy. It is intended for WC/Co hardmetals (also called cemented carbides or cermets) containing primarily tungsten carbide (WC[1]) as the hard phase. It is also intended for measuring the grain size and distribution by the linear-intercept technique.
This document essentially covers four main topics:
—     calibration of microscopes, to underpin the accuracy of measurements;
—     linear analysis techniques, to acquire sufficient statistically meaningful data;
—     analysis methods, to calculate representative average values;
—     reporting, to comply with modern quality requirements.
This document is supported by a measurement case study to illustrate the recommended techniques (see Annex A).
This document is not intended for the following:
—     measurements of size distribution;
—     recommendations on shape measurements. Further research is needed before recommendations for shape measurement can be given.
Measurements of coercivity are sometimes used for grain-size measurement, however, this document is concerned only with a metallographic measurement method. It is also written for hardmetals and not for characterizing powders. However, the method can, in principle, be used for measuring the average size of powders that are suitably mounted and sectioned.
[1] DE: Wolframcarbid, EN: tungsten carbide.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4497:2020(Main)
Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)
SIST EN ISO 4497:2020

This document specifies a method of determining the particle size distribution of metallic powders by dry sieving into size fractions.
The method is applicable to dry, unlubricated metallic powders, but not applicable to powders in which the morphology differs markedly from being equiaxial, for example flake-type powders.
The method is not applicable to metallic powders having a particle size wholly or mostly under 45 µm.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day