EN ISO 19410-1:2022

Footwear sizing - Inshoe measurement - Part 1: Shoe length (ISO 19410-1:2022)

This document specifies a method for measuring the effective shoe length to accommodate the foot.
This document is not applicable to heel and toe open shoes (example: sandals).

Schuhgrößenbestimmung - Messung des Innenschuhs - Teil 1: Schuhlänge (ISO 19410-1:2022)

Dieses Dokument legt ein Verfahren zur Messung der effektiven Schuhlänge zur Aufnahme des Fußes fest.
Dieses Dokument ist nicht anwendbar für Schuhe, bei denen Ferse und Zehen freiliegen (Beispiel: Sandalen).

Pointures des chaussures - Mesurage interne - Partie 1: Longueur de la chaussure (ISO 19410-1:2022)

Le présent document spécifie une méthode de mesure de la longueur chaussante adaptée au pied.
Il n’est pas applicable aux chaussures à bout et talon ouverts (par exemple, les sandales).

Določanje velikosti obutve - Merjenje notranjosti čevlja - 1. del: Dolžina čevlja (ISO 19410-1:2022)

Ta standard določa metodo za merjenje dejanske dolžine čevlja za prilagoditev stopalu. Ta standard se ne uporablja za čevlje z odprto peto.

General Information

• Status: Published
• Publication Date: 15-Nov-2022
• ICS: 61.060 - Footwear
• Technical Committee: CEN/TC 309 - Footwear
• Drafting Committee: CEN/TC 309/WG 4 - Footwear sizing designation and marking system
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 16-Nov-2022
• Due Date: 12-Jul-2024
• Completion Date: 16-Nov-2022
• Ref Project: SIST EN ISO 19410-1:2023 - Footwear sizing - Inshoe measurement - Part 1: Shoe length (ISO 19410-1:2022)

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2023
Določanje velikosti obutve - Merjenje notranjosti čevlja - 1. del: Dolžina čevlja (ISO
19410-1:2022)
Footwear sizing - Inshoe measurement - Part 1: Shoe length (ISO 19410-1:2022)
Schuhgrößenbestimmung - Messung des Innenschuhs - Teil 1: Schuhlänge (ISO 19410-
1:2022)
Pointures des chaussures - Mesurage interne - Partie 1: Longueur de la chaussure (ISO
19410-1:2022)
Ta slovenski standard je istoveten z: EN ISO 19410-1:2022
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19410-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear sizing - Inshoe measurement - Part 1: Shoe
length (ISO 19410-1:2022)
Pointures des chaussures - Mesurage interne - Partie 1: Schuhgrößenbestimmung - Messung des Innenschuhs -
Longueur de la chaussure (ISO 19410-1:2022) Teil 1: Schuhlänge (ISO 19410-1:2022)
This European Standard was approved by CEN on 11 November 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19410-1:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 19410-1:2022) has been prepared by Technical Committee ISO/TC 137
"Footwear sizing designations and marking systems" in collaboration with Technical Committee
CEN/TC 309 “Footwear” the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19410-1:2022 has been approved by CEN as EN ISO 19410-1:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 19410-1
First edition
2022-10
Footwear sizing — In-shoe
measurement —
Part 1:
Shoe length
Pointures des chaussures — Mesurage interne —
Partie 1: Longueur de la chaussure
Reference number
ISO 19410-1:2022(E)
ISO 19410-1:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 19410-1:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 4
7 Procedure .5
8 Result of measurement .6
9 Test report . 6
iii
ISO 19410-1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any
...