iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 15194:2009

(Main)

In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009)

In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009)

ISO 15194:2009 specifies requirements for certified reference materials and the content of their supporting documentation, in order for them to be considered of higher metrological order in accordance with ISO 17511. It is applicable to certified reference materials classifiable as primary measurement standards, secondary measurement standards and international conventional calibrators that function either as calibrators or trueness control materials. ISO 15194:2009 also provides requirements on how to collect data for value determination and how to present the assigned value and its measurement uncertainty.
ISO 15194:2009 applies to certified reference materials with assigned values of differential or rational quantities. Annex A provides information on nominal properties and ordinal quantities.
ISO 15194:2009 does not apply to reference materials that are parts of an in vitro diagnostic measuring system, although it is possible that many elements are helpful.

In-vitro-Diagnostika - Messung von Größen in Proben biologischen Ursprungs - Anforderungen an zertifizierte Referenzmaterialien und an den Inhalt der Begleitdokumentation (ISO 15194:2009)

Diese Internationale Norm legt Anforderungen an zertifizierte Referenzmaterialien und an den Inhalt ihrer Begleitdokumentation fest, um von diesen als von höherer metrologischer Ordnung nach ISO 17511 berücksichtigt zu werden. Sie gilt für zertifizierte Referenzmaterialien, die als Primärmessnormen, Sekundärmessnormen und international vereinbarte Kalibriermittel eingestuft werden können, die entweder als Kalibriermittel oder Richtigkeitskontrollmaterialien funktionieren. Diese Internationale Norm stellt ferner
Anforderungen bereit, wie Daten zur Ermittlung der Werte zu sammeln sind und wie der zugeordnete Wert und dessen Messunsicherheit darzustellen sind.
Die vorliegende Internationale Norm gilt für zertifizierte Referenzmaterialien mit zugeordneten Werten unterschiedlicher oder rationaler Mengen. Anhang A enthält Informationen über Nominaleigenschaften und Ordinalgrößen.
Diese Internationale Norm gilt nicht für Referenzmaterialien, die Bestandteil eines Messsystems zur In-vitro-Diagnose sind, obwohl zahlreiche Elemente hilfreich sein können

Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans les échantillons d'origine biologique - Exigences relatives aux matériaux de référence certifiés et au contenu de la documentation associée (ISO 15194:2009)

L'ISO 15194:2009 spécifie des exigences concernant les matériaux de référence certifiés (MRC) et le contenu de la documentation qui leur est associée afin qu'ils soient considérés comme étant de niveau métrologique supérieur conformément à l'ISO 17511. Elle s'applique aux MRC qui peuvent être classés en tant qu'étalons primaires, étalons secondaires et étalons conventionnels internationaux qui font fonction soit d'étalons, soit de matériaux de contrôle de la justesse. L'ISO 15194:2009 contient également des exigences sur la façon dont les données doivent être recueillies pour la détermination de valeurs et sur le mode de présentation de la valeur assignée et de son incertitude de mesure.
L'ISO 15194:2009 s'applique aux MRC auxquels sont associées des grandeurs différentielles ou proportionnelles ayant une valeur assignée. Concernant les propriétés et les grandeurs ayant des valeurs exprimées sur une échelle nominale ou ordinale, voir l'Annexe A.
L'ISO 15194:2009 ne s'applique pas aux matériaux de référence qui font partie d'un système de diagnostic in vitro bien que de nombreux éléments puissent être utiles.

Diagnostični medicinski pripomočki in vitro - Merjenje količin v vzorcih biološkega izvora - Zahteve za certificirane referenčne materiale in vsebino podporne dokumentacije (ISO 15194:2009)

General Information

Status
Published
Publication Date
30-Apr-2009
Withdrawal Date
29-Apr-2012
ICS
11.100.10 - In vitro diagnostic test systems
Technical Committee
CEN/TC 140 - In vitro diagnostic systems
Drafting Committee
CEN/TC 140/WG 4 - Reference systems
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Sep-2014
Directive
98/79/EC - Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices
Mandate
M/252 - Standardization Mandate to CEN/CENELEC concerning the development of European standards relating to in vitro diagnostic medical devices
Ref Project
SIST EN ISO 15194:2009 - In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009)

Relations

Revised
prEN ISO 15194 - In vitro diagnostic medical devices - Requirements for certified reference materials and the content of supporting documentation (ISO/DIS 15194:2023)
Effective Date
18-Jan-2023

Buy Standard

EN ISO 15194:2009EN ISO 15194:2009
PreviousNext
Standard
EN ISO 15194:2009
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15194:2009
01-julij-2009
'LDJQRVWLþQLPHGLFLQVNLSULSRPRþNLLQYLWUR0HUMHQMHNROLþLQYY]RUFLKELRORãNHJD
L]YRUD=DKWHYH]DFHUWLILFLUDQHUHIHUHQþQHPDWHULDOHLQYVHELQRSRGSRUQH
GRNXPHQWDFLMH ,62
In vitro diagnostic medical devices - Measurement of quantities in samples of biological
origin - Requirements for certified reference materials and the content of supporting
documentation (ISO 15194:2009)
In-vitro-Diagnostika - Messung von Größen in Proben biologischen Ursprungs -
Anforderungen an zertifizierte Referenzmaterialien und an den Inhalt der
Begleitdokumentation (ISO 15194:2009)
Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans les
échantillons d'origine biologique - Exigences pour les matériaux de référence certifiés et
pour le contenu de la documentation justificative (ISO 15194:2009)
Ta slovenski standard je istoveten z: EN ISO 15194:2009
ICS:
11.100.10 'LDJQRVWLþQLSUHVNXVQL In vitro diagnostic test
VLVWHPLLQYLWUR systems
SIST EN ISO 15194:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15194:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 15194:2009
EUROPEAN STANDARD
EN ISO 15194
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS 11.100.10
English Version
In vitro diagnostic medical devices - Measurement of quantities
in samples of biological origin - Requirements for certified
reference materials and the content of supporting
documentation (ISO 15194:2009)
Dispositifs médicaux de diagnostic in vitro - Mesurage des In-Vitro-Diagnostika - Messung von Größen in Proben
grandeurs dans les échantillons d'origine biologique - biologischen Ursprungs - Anforderungen an zertifizierte
Exigences relatives aux matériaux de référence certifiés et Referenzmaterialien und an den Inhalt der
au contenu de la documentation associée (ISO Begleitdokumentation (ISO 15194:2009)
15194:2009)
This European Standard was approved by CEN on 16 April 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15194:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15194:2009
EN ISO 15194:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 98/79 .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15194:2009
EN ISO 15194:2009 (E)
Foreword
This document (EN ISO 15194:2009) has been prepared by Technical Committee CEN/TC 140 "In vitro
diagnostic medical devices", the secretariat of which is held by DIN, in collaboration with Technical Committee
ISO/TC 212 "Clinical laboratory testing and in vitro diagnostic test systems".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2009, and conflicting national standards shall be withdrawn
at the latest by November 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 20916:2024(Main)
In vitro diagnostic medical devices - Clinical performance studies using specimens from human subjects - Good study practice (ISO 20916:2019)
SIST EN ISO 20916:2024

This document defines good study practice for the planning, design, conduct, recording and reporting of clinical performance studies carried out to assess the clinical performance and safety of in vitro diagnostic (IVD) medical devices for regulatory purposes.
NOTE 1    The purpose of these studies is to assess the ability of an IVD medical device in the hands of the intended user, to yield results pertaining to a particular medical condition or physiological/pathological state, in the intended population.
The document is not intended to describe whether the technical specifications of the IVD medical device in question are adequately addressed by the clinical performance study.
This document identifies the principles that underpin clinical performance studies and specifies general requirements intended to
—          ensure the conduct of the clinical performance study will lead to reliable and robust study results,
—          define the responsibilities of the sponsor and principal investigator,
—          assist sponsors, clinical research organization, investigators, ethics committees, regulatory authorities and other bodies involved in the conformity assessment of IVD medical devices, and
—          protect the rights, safety, dignity and well-being of the subjects providing specimens for use in clinical performance studies.
Analytical performance studies are out of the scope of this document.
NOTE 2    When the collection of specimens specifically for the analytical performance study creates an additional collection risk for subjects, some of the elements of this document (particularly the annexes) can be useful for ensuring subject safety.
Clinical performance studies that are performed for reasons other than pre- and post-market regulatory purposes, such as for re-imbursement purposes, are out of the scope of this document.
NOTE 3    Some of the elements of this document can be useful for the design of such studies, including subject safety and data integrity.
This document does not include safety information for laboratory workers or other personnel collecting the study specimens.
NOTE 4    Such information is included in other publications[1][12][13].
NOTE 5    Users of this document can consider whether other standards and/or requirements also apply to the IVD medical device which is the subject of the clinical performance study, for instance, in the situation for which there is an IVD medical device and a medical device used in an integrated system (e.g. a lancet, an IVD test strip, and a glucose meter), aspects of both this document and ISO 14155 can be considered.

  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17981-1:2023(Main)
In vitro diagnostic Next Generation Sequencing (NGS) workflows - Part 1: Human DNA examination
SIST-TS CEN/TS 17981-1:2024

This document specifies requirements and gives recommendations for next generation sequencing (NGS) workflows for in vitro diagnostics and biomedical research. This document covers the pre-examination processes, human DNA (somatic and germline) isolation, sequencing library preparation, sequencing, sequence analysis and reporting of the examination of sequences for diagnostic purposes from isolated DNA from, e.g. formalin-fixed and paraffin embedded tissues, fresh frozen tissues, fine needle aspirates (FNA), whole blood, circulating tumour cells (CTCs), exosomes and other extracellular vesicles, circulating cell free DNA from plasma, and DNA from saliva.
NOTE 1   Typical applications include, but are not limited to, NGS for oncology, pharmacogenomics and clinical genetics; approaches include panels (e.g. disease panels, exome panels, target gene panels and in silico panels), exome and whole genome sequencing, as well as certain epigenetics and certain single-cell analyses.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories, molecular pathology laboratories and molecular genetic laboratories. This document is also applicable to laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions, and organizations performing biomedical research.
This document is not applicable for in situ sequencing, DNA-mediated protein sequencing, forensic sequencing, sequencing of pathogens or microorganisms and microbiome analysis.
NOTE 2   International, national or regional regulations or requirements or multiples of them can also apply to specific topics covered in this document.

  • Technical specification
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17981-2:2023(Main)
In vitro diagnostic Next Generation Sequencing (NGS) workflows - Part 2: Human RNA examination
SIST-TS CEN/TS 17981-2:2024

This document specifies requirements and gives recommendations for next generation sequencing (NGS) workflows for in vitro diagnostics and biomedical research. This document covers the pre-examination processes, human RNA isolation, sequencing library preparation, sequencing, sequence analysis and reporting of the examination of sequences for diagnostic purposes from isolated RNA from, e.g. formalin-fixed and paraffin embedded tissues, fresh frozen tissues, fine needle aspirates (FNA), whole blood, circulating tumour cells (CTCs), exosomes and other extracellular vesicles, and circulating cell free RNA from plasma.
NOTE 1   Typical applications include, but are not limited to, NGS for oncology and clinical genetics, certain single-cell analyses.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories, molecular pathology laboratories and molecular genetic laboratories. This document is also applicable to laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions, and organisations performing biomedical research.
This document is not applicable for in situ sequencing, forensic sequencing, sequencing of pathogens or microorganisms and microbiome analysis.
NOTE 2   International, national or regional regulations or requirements or multiples of them can also apply to specific topics covered in this document.

  • Technical specification
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17811:2022(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for urine and other body fluids - Isolated cell free DNA
SIST-TS CEN/TS 17811:2022

This document specifies requirements and gives recommendations on the handling, storage, processing and documentation of body fluids specimens intended for human cfDNA examination during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations performed by medical laboratories. It is also intended to be used by health institutions including facilities collecting and handling specimen, laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organizations performing biomedical research, and regulatory authorities.
Dedicated measures that need to be taken for cytohistological analysis of body fluid derived nucleated cells are not described in this technical specification. Neither are measures for preserving and handling of pathogens, and other bacterial or whole microbiome DNA in body fluids described.
Different dedicated measures need to be taken for preserving ccfDNA from other body fluids such as blood, lymph and others. These are not described in this document. ccfDNA from blood is covered in EN ISO 20186-3.
NOTE   International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Technical specification
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17747:2022(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - DNA, RNA and proteins
SIST-TS CEN/TS 17747:2022

This document gives guidelines on the handling, storage, processing and documentation of venous whole blood specimens intended for DNA, RNA and protein examination from exosomes and other extracellular vesicles during the pre-examination phase before a molecular examination is performed. This document covers specimens collected in venous whole blood collection tubes.
The pre-examination process described in this document results in isolated DNA, RNA and proteins from enriched exosomes and other extracellular vesicles.
This document is applicable to molecular in vitro diagnostic examinations performed by medical laboratories. It is also intended to be used by health care institutions including facilities collecting and handling specimen, laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organizations performing biomedical research, and regulatory authorities.
Different dedicated measures are taken during the pre-examination phase for venous whole blood circulating cell-free RNA (ccfRNA) examination and for venous whole blood circulating cell-free DNA (ccfDNA) examination, both without prior enrichment of exosomes and other extracellular vesicles. These are not described in this document but are covered in EN ISO 20186 3, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma and CEN/TS 17742, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Isolated circulating cell free RNA from plasma.
NOTE   International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17742:2022(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Isolated circulating cell free RNA from plasma
SIST-TS CEN/TS 17742:2022

This document specifies requirements and recommendations for the pre-examination phase of circulating cell free RNA (ccfRNA) from venous whole blood specimens, including but not limited to the collection, handling, storage, processing and documentation of venous whole blood specimens intended for ccfRNA examination. This document covers specimens collected in venous whole blood collection tubes.
The pre-examination process described in this document results in circulating cell free RNA isolated from blood plasma without prior enrichment of exosomes and other extracellular vesicles.
This document is applicable to molecular in vitro diagnostic examinations performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organizations performing biomedical research, and regulatory authorities.
Different dedicated measures need to be taken during the pre-examination phase for isolated RNA from enriched exosomes and other extracellular vesicles enriched from venous whole blood and for cellular RNA isolated from venous whole blood. These are not described in this document but are covered in CEN/TS 17747,  Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for exosomes and other extracellular vesicles in venous whole blood - Isolated DNA, RNA and proteins, and in EN ISO 20186 1, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA.
NOTE   International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17688-3:2021(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) - Part 3: Isolated genomic DNA
SIST-TS CEN/TS 17688-3:2022

This document gives guidelines on the handling, documentation, storage and processing of fine needle aspirates (FNAs) intended for gDNA examination during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories and molecular pathology laboratories that examine gDNA isolated from FNAs. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organisations performing biomedical research, and regulatory authorities.
Different dedicated measures are taken for collecting, stabilizing, transporting and storing of core needle biopsies (FNA Biopsy or FNA B) and are not covered in this document, but EN ISO 20184-3, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for frozen tissue - Part 3: Isolated DNA and EN ISO 20166-3, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 3: Isolated DNA.
This document is not applicable for pathogen DNA examination and gDNA examination by in situ detection.
NOTE International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Technical specification
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17688-2:2021(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) - Part 2: Isolated proteins
SIST-TS CEN/TS 17688-2:2022

This document gives guidelines on the handling, documentation, storage and processing of fine needle aspirates (FNAs) intended for protein examination during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories and molecular pathology laboratories that examine proteins isolated from FNAs. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organisations performing biomedical research, and regulatory authorities.
Different dedicated measures are taken for collecting, stabilizing, transporting and storing of core needle biopsies (FNA Biopsy or FNA B) and are not covered in this document, but in EN ISO 20184-2, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for frozen tissue - Part 2: Isolated proteins and EN ISO 20166-2, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for formalin fixed and paraffin-embedded (FFPE) tissue - Part 2: Isolated proteins.
This document is not applicable for protein examination by immunohistochemistry.
NOTE International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17688-1:2021(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for Fine Needle Aspirates (FNAs) - Part 1: Isolated cellular RNA
SIST-TS CEN/TS 17688-1:2022

This document gives guidelines on the handling, documentation, storage and processing of fine needle aspirates (FNAs) intended for RNA examination during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examination including laboratory developed tests performed by medical laboratories and molecular pathology laboratories that examine RNA isolated from FNAs. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organisations performing biomedical research, and regulatory authorities.
Different dedicated measures are taken for collecting, stabilizing, transporting and storing of core needle biopsies (FNA Biopsy or FNA B) and are not covered in this document, but in EN ISO 20184-1, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for frozen tissue - Part 1: Isolated RNA and EN ISO 20166-1, Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for formalin fixed and paraffin-embedded (FFPE) tissue - Part 1: Isolated RNA.
This document is not applicable for RNA examination by in situ detection.
NOTE International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4307:2021(Main)
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for saliva - Isolated human DNA (ISO 4307:2021)
SIST EN ISO 4307:2022

This document specifies requirements and recommendations on the handling, storage, processing and documentation of saliva specimens intended for human DNA examination during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examination including laboratory developed tests performed by medical laboratories. It can also be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions and commercial organizations performing biomedical research, and regulatory authorities.
Dedicated measures that need to be taken for saliva collected on absorbing material or by mouth washes are not described in this document. Neither are measures for preserving and handling of native saliva cell-free DNA, pathogens, and other bacterial or whole microbiome DNA in saliva described.
NOTE       International, national or regional regulations or requirements can also apply to specific topics covered in this document.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day