- The scope of the standard to be amended is:
This European Standard specifies the safety requirements applicable to carriers for cableway installations designed to carry persons. This part of EN 12929 specifies the safety requirements for the general requirements for cableway installations designed to carry persons. These requirements are applied to the various types of installations and their environment.
This document defines general technical characteristics and prescribes design principles and general safety requirements.
It does not deal with details of operation and maintenance, nor with calculations and detailed requirements for the manufacture of components.
This Part 1 does not deal with special regulations applicable to bi-cable reversible aerial ropeways without carrier truck brakes, which are the subject of Part 2.
It includes requirements relating to the prevention of accidents and the protection of workers.
It does not apply to cableway installations for transportation of goods or to lifts.
Clause 11 describes the minimum requirements to be normatively satisfied for passageways and work areas. National regulations of a building or federal/state nature or which serve to protect particular groups of people remain unaffected.
It may not always be possible for all types of cableway installation to transport all particular groups of people (e.g. persons with restricted mobility). The objective should be, however, for a cableway installation to enable the transportation of the largest possible passenger population.
- The scope of the proposed amendment A1 on this standard is to modify article 10.2 on braking system in order to be in line with the text of the regulation 2016/424/

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document is applicable to all types of fluid heating solar collectors. This European Standard specifies performance requirements for fluid heating solar collectors with respect to durability, reliability, safety and thermal performance. This European Standard includes provisions for the assessment and verification of constancy of performance to these requirements.
This document deals with the collector module and not with assemblies. This document is not applicable to those devices in which a thermal storage unit is an integral part to such an extent that the collection process cannot be separated from the storage process for making the collector thermal performance measurements.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day

- The scope of the standard to be amended is:
This European Standard specifies the safety requirements applicable to carriers for cableway installations designed to carry persons. This part of EN 12929 specifies the safety requirements for the general requirements for cableway installations designed to carry persons. These requirements are applied to the various types of installations and their environment.
This document defines general technical characteristics and prescribes design principles and general safety requirements.
It does not deal with details of operation and maintenance, nor with calculations and detailed requirements for the manufacture of components.
This Part 1 does not deal with special regulations applicable to bi-cable reversible aerial ropeways without carrier truck brakes, which are the subject of Part 2.
It includes requirements relating to the prevention of accidents and the protection of workers.
It does not apply to cableway installations for transportation of goods or to lifts.
Clause 11 describes the minimum requirements to be normatively satisfied for passageways and work areas. National regulations of a building or federal/state nature or which serve to protect particular groups of people remain unaffected.
It may not always be possible for all types of cableway installation to transport all particular groups of people (e.g. persons with restricted mobility). The objective should be, however, for a cableway installation to enable the transportation of the largest possible passenger population.
- The scope of the proposed amendment A1 on this standard is to modify article 10.2 on braking system in order to be in line with the text of the regulation 2016/424/

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with the technical requirements to minimise the risks of hazards listed in Clause 4 which can arise during the operation and/or maintenance of double acting hydraulic rescue tool systems, when carried out as intended by the manufacturer or his authorised representative. All the safety requirements of this document apply to double acting hydraulic rescue tools manufactured after the date of publication. Double acting hydraulic rescue tool systems are intended for use by the fire fighting and rescue services, principally for cutting through, spreading or pushing apart the structural parts of road vehicles, ships, trains, aircraft's and building structures involved in accidents. They consist, as defined in Clause 3 of a separate power pack, the tool[s] and the necessary interconnections and intended accessories.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document deals with the technical requirements to minimise the risks of hazards listed in Clause 4 which can arise during the operation and/or maintenance of double acting hydraulic rescue tool systems, when carried out as intended by the manufacturer or his authorised representative.
All the safety requirements of this document apply to double acting hydraulic rescue tools manufactured after the date of publication.
Double acting hydraulic rescue tool systems are intended for use by the fire fighting and rescue services, principally for cutting through, spreading or pushing apart the structural parts of road vehicles, ships, trains, aircraft's and building structures involved in accidents. They consist, as defined in Clause 3 of a separate power pack, the tool[s] and the necessary interconnections and intended accessories.
NOTE 1   The aim is to assist whilst extracting the casualties or to create a working space for paramedical services taking the local conditions into account.
This document does not establish the additional requirements for:
a)   operation in severe conditions (e.g. extreme environmental conditions such as: temperatures outside the range -20 °C +55 °C, corrosive environment, tropical environment, contaminating environments, strong magnetic fields, potentially explosive atmospheres);
b)   the risk directly arising from the means provided for the portability, transportability and mobility of double-acting hydraulic rescue tools during periods of their operation.
NOTE 2   For the EU/EEA other Directives can be applicable to the equipment in the scope, for example the Electro Magnetic Compatibility Directive.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day